Originally Posted by Cab_Burge
How do the impellers and front seal area look?
You could put some water in the housing with the fan mounting surface pointing down to see if the water will seep or leak out the seal to start with shruggy


"make sure to tilt the assembly to see if any moisture starts to appear at the weep hole on the pump as well."

Here are a couple pictures of the pump. I had it standing on end all day (propeller end up) with water in it. No leakage anywhere including the weep hole even when I tipped it. The only thing that seems unusual is when I turn the impeller, it seems it doesn't turn as easily as the pump I have on my other car.

DSC00004.JPGDSC00005.JPG
Last edited by 6PAX; 03/18/23 07:46 PM.