Well, I may have circled the wrong holes.
What I'm sure of, is the 4 top holes are not threaded.
The 2 holes I need bolts for are threaded, they insert from engine side and thread into trans, and are larger than top 4 bolts.
Trans is mated to engine, I know this because I fought it for 2 hours getting those guide pins aligned.
Dust cover is installed, just these last 2 spots are missing bolts.

Found this pic, not mine, but this is starter side

1EBD938D-9E85-49F8-9268-D5E545C3554A.jpeg
Last edited by BDW; 08/13/22 06:34 PM.