Originally Posted by IMGTX
Originally Posted by NITROUSN
Find the make and model and look on line for the manual. That tab that is popping up looks like some sort of lock. What does the saw table look like where it sits?


Unfortunately the Model tag is missing.

What I do know is it is an old Model 113 10" saw.

The tab at the rear holds the back of the plate to the table and the lever/tab at the front holds the front to the table.

I have reviewed all the images of similar models and owners manuals and none of them have the tab.

It appears to be a latch to hold the front of the plate down. You have to lift the tab to remove the plate.

I wasn't finding any information on it so I figured I would ask in case I was wrong.


I have the same series 113 saw. Bolded is what it is. You'll have to look at it to see what's crooked or bent, but all it is is a latch to hold the front edge down.

Last winter I tore it down and lubed the trunions and the elevation/tilt mechanisms, and replaced the spindle bearings. It runs great now.

If you ever find yourself in a fair fight, your tactics suck.