Hi All, it's been awhile since I've posted on here. You've always been helpful in there past!

Having my motor freshened up. Need a cam / head recommendation, or at least a confirmation. Street use / cruising only. I want a LITTLE more lumpy "rumble at idle" sound, but not at the expense of driving and vacuum. Maybe just ned a came with 110 lobe (currently 112), so this is triggering other enhancements.

E-body, currently:
1968 440 is bored 30 over (keeping)
Power brakes (required)
L2355f 030 six pack pistons (w/valve reliefs), 0.06 in the hole, 7cc dish total (keeping)
Stock 440 rods (keeping)
727 auto, TCI Breakaway converter (2400 stall?), 3:55 gear (keeping)
Exhaust will be TTI 1 7/8 headers (2.5"or 3" exhaust and Super Turbo mufflers - final yet to be determined)
800 cfm Edelbrock, dual plane Performer RPM intake
452 heads now, nothing special done
Continue to use pump gas

Looking at these:
- Lunati 268/276 Voodoo10200703
- E-street 75cc or 440Source 80cc
- Comp Cams Ultra Pro steel roller rockers, or keep current stamped steel depending on the cam

My current cam is SpeedPro CS1148R: Hydraulic camshaft 2000-5500 rpm range, adv. duration 289 intake/ 289 exhaust, duration @ .050 of 224 intake and 224 exhaust, Valve lift of .455 intake and .455 exhaust, Lobe C/L is 112

I do not want a roller cam.

Based on what I have, your thoughts on the current set-up and potential cam and heads? Any more info needed? Thanks a lot!


1971 Cuda, 440 custom-build