[s][/s]
Does a Cuda vert use the same seat belt bolts as a hardtop. I know there is no should harness bolts. Also the inner seat belt has only one strap, so does that a different bolt also. Or are all the bolts the same less the 2 should harness bolts
Bob
C10 retractors
C-11 rear outer belt. (Also for shoulder belts)
C-12 Front and rear center
To correct the above:
Front retractor("pull") belts, the correct bolts for securing these are stamped or cast C01 and are silver zinc in colour
The roof belts and the four rear belts all use bolts that are stamped or cast C11 and are black zinc in colour
The front two belts that are secured to the drive shaft tunnel area are always stamped or cast C12 and are gold zinc in colour
