4 speed input shaft measurement needed

Print Thread

Re: 4 speed input shaft measurement needed [Re: A727Tflite] #2796586 07/14/20 03:58 PM 07/14/20 03:58 PM
Joined: Aug 2004 Posts: 2,090 New Mexico J JMCFAN top fuel
JMCFAN top fuel J Joined: Aug 2004 Posts: 2,090 New Mexico	My roadrunner 4sp crank was toast...the machine shop found one but it needed to be drilled. Unfortunately they not drill deep enough....trans would not mate up. Rather then disassemble the motor and redrill.... we took about 1/2 off the shaft. All good 68 Charger 383/ AT Green/Green VT 70 Roadrunner 383/4sp Purple/Black VT

Entire Thread
Subject	Posted By	Posted
4 speed input shaft measurement needed	roadrunninMark	07/11/20 11:57 PM
Re: 4 speed input shaft measurement needed	PhillyRag	07/12/20 01:21 AM
Re: 4 speed input shaft measurement needed	roadrunninMark	07/12/20 01:56 AM
Re: 4 speed input shaft measurement needed	PhillyRag	07/12/20 03:18 AM
Re: 4 speed input shaft measurement needed	Stanton	07/12/20 02:55 PM
Re: 4 speed input shaft measurement needed	Sinitro	07/12/20 03:58 PM
Re: 4 speed input shaft measurement needed	roadrunninMark	07/13/20 04:05 PM
Re: 4 speed input shaft measurement needed	SNK-EYZ	07/13/20 04:43 PM
Re: 4 speed input shaft measurement needed	roadrunninMark	07/13/20 08:15 PM
Re: 4 speed input shaft measurement needed	A727Tflite	07/13/20 08:59 PM
Re: 4 speed input shaft measurement needed	roadrunninMark	07/13/20 10:44 PM
Re: 4 speed input shaft measurement needed	Stanton	07/14/20 01:36 AM
Re: 4 speed input shaft measurement needed	A727Tflite	07/14/20 02:54 AM
Re: 4 speed input shaft measurement needed	roadrunninMark	07/14/20 01:22 PM
Re: 4 speed input shaft measurement needed	A727Tflite	07/14/20 04:13 PM
Re: 4 speed input shaft measurement needed	JMCFAN	07/14/20 07:58 PM
Re: 4 speed input shaft measurement needed	roadrunninMark	07/14/20 10:11 PM
Re: 4 speed input shaft measurement needed	cudaman1969	07/15/20 06:29 PM

Hop To