Dwayne,

Yes, this is the stick car with the M1 dominator manifold replacing the Victor. The M1 is without the 1-1/2” open tapered spacer i ran on the Victor. Also, i put on the flat stock looking fiberglass hood replacing the 4” sixpack scoop fresh air hood. I just radiused the upper plenum area and portmatched to the heads. Old setup usually ran 10.80’s at 126 mph. So i lost about a tenth and about 1-1/2 mph with this change.

But, that is with 4 runs with this setup, comparing to about 50 or so runs of tuning with the older setup