Guys,

I had an issues with my brake lights not working in my 70 Cuda. So I researched and replaced my turn signal assembly in the steering wheel. The brake lights now work but I now have another problem. When I turn on the ignition, the hazard flasher by the radio activates and my taillights blink (not my front lights or dash lights). When I pull the hazard light switch, all the hazards work as intended. Someone in the past messed with the stock wiring and made some changes, maybe compensating for a bad turn signal switch, I don't know. Is there a easy way to either bypass the hazard relay without affecting my taillights, turn signals etc.? I plan on replacing the wiring this winter but I just want to get the car on the road for now.

Thanks.