There’s probably a shop with a dyno-jet 248 inertia dyno not too far from you. They’re the most popular chassis dyno from what I can see.
If you get more curious about how your build stacks up at some point in the future..... bring it to a shop that has one of those........ make sure the rpm pick-up is working properly....... do your pull in high gear....... make a few pulls.
There’s enough data out there taken with that type of dyno so you’d have plenty to compare to.
68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123 Dealer for Comp Cams/Indy Heads
|