Clearancing push rod holes

Print Thread

Re: Clearancing push rod holes [Re: 440mopar] #2669728 06/25/19 10:24 AM 06/25/19 10:24 AM
Joined: May 2011 Posts: 4,489 northern,Ohio,USA C Clanton master
Clanton master C Joined: May 2011 Posts: 4,489 northern,Ohio,USA	Did you think about opening the oil drain holes?I used a 1/4 double cut bit 4" long on both Last edited by Clanton; 06/25/19 10:28 AM. GOTBOOST!New improved with Victor heads. http://www.enginelabs.com/mopar-big-bloc...t-of-necessity/

Entire Thread
Subject	Posted By	Posted
Clearancing push rod holes	440mopar	06/25/19 02:11 AM
Re: Clearancing push rod holes	pittsburghracer	06/25/19 02:21 AM
Re: Clearancing push rod holes	Cab_Burge	06/25/19 02:39 AM
Re: Clearancing push rod holes	440mopar	07/09/19 03:07 AM
Re: Clearancing push rod holes	BradH	07/09/19 03:58 AM
Re: Clearancing push rod holes	TRENDZ	07/09/19 07:57 AM
Re: Clearancing push rod holes	hemi-itis	07/09/19 01:17 PM
Re: Clearancing push rod holes	W.I.N. Racing	07/20/19 03:24 PM
Re: Clearancing push rod holes	440mopar	07/11/19 02:17 AM
Re: Clearancing push rod holes	Cab_Burge	07/11/19 05:20 AM
Re: Clearancing push rod holes	polyspheric	07/11/19 12:51 PM
Re: Clearancing push rod holes	BradH	07/11/19 03:12 PM
Re: Clearancing push rod holes	440mopar	07/13/19 01:45 PM
Re: Clearancing push rod holes	pittsburghracer	07/13/19 02:26 PM
Re: Clearancing push rod holes	BradH	07/16/19 12:39 AM
Re: Clearancing push rod holes	StealthWedge67	07/19/19 04:15 AM
Re: Clearancing push rod holes	440mopar	07/20/19 01:06 PM
Re: Clearancing push rod holes	BradH	07/20/19 03:35 PM
Re: Clearancing push rod holes	ZIPPY	06/25/19 01:01 PM
Re: Clearancing push rod holes	Stanton	06/25/19 01:26 PM
Re: Clearancing push rod holes	moparx	06/25/19 02:15 PM
Re: Clearancing push rod holes	Clanton	06/25/19 02:24 PM
Re: Clearancing push rod holes	Stanton	06/25/19 10:28 PM
Re: Clearancing push rod holes	polyspheric	06/26/19 01:48 AM
Re: Clearancing push rod holes	Clanton	06/26/19 01:34 PM
Re: Clearancing push rod holes	dthemi	06/26/19 10:48 PM
Re: Clearancing push rod holes	hemi-itis	06/28/19 03:09 PM
Re: Clearancing push rod holes	second 70	07/10/19 02:52 PM
Re: Clearancing push rod holes	hemi-itis	07/20/19 02:33 PM
Re: Clearancing push rod holes	1KoolBee	07/10/19 12:51 AM
Re: Clearancing push rod holes	440mopar	07/10/19 01:28 PM
Re: Clearancing push rod holes	MR_P_BODY	07/10/19 02:07 PM
Re: Clearancing push rod holes	pittsburghracer	07/10/19 02:25 PM
Re: Clearancing push rod holes	MR_P_BODY	07/10/19 02:53 PM
Re: Clearancing push rod holes	moparx	07/10/19 03:10 PM
Re: Clearancing push rod holes	451Mopar	07/10/19 05:58 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To