Originally Posted By Thumperdart
If there's enuff material there, drill n tap for 8-32 set screws and start at .055 and go up or down as needed but w/out an afr gauge it's a guessing game and LOTS of trial an error..........Good talking to you and if you do what we discussed you should be pretty close then salt to taste........ thumbs
took the press in jets out the main body and checked and there is enough meat to make it work with 8-32"s, just ordered the brass set screws today from Fastenal, probably get on it this weekend and give you a call back when I get ready to screw this thing together just to make sure I have covered everything. I have a innovate lm-2 and going to get a couple of new SD cards and a second o2 sensor so I can read both banks, thanks for the info and insights, it was good to talk to you also, I feel a whole lot better about this pile of parts on my bench now up


Light travels faster than the speed of sound,,,this is why some people seem bright untill you hear them speak.