Originally Posted By madscientist
Originally Posted By MR_P_BODY
How big can you get away with... 14" dia...
how tall.. I will go out to the shop and see
what element I have out there... its rated at
1000 cfm and is 2" tall.. I didnt see that they
offered a 3" but the 2" flows more than the K&M 3"
EDIT
Wix racing... 1000+ cfm
wave


I think with the flat base that is on there now I can only get a 2 inch filter on there. It's not a good filter on there now.

With the right base I think I can go 3 inch by 14 in diameter.


If you go with a high flow element a 2" will
out flow a 3" from most companies.. myself..
I dont care for the drop base units BUT if you
have to then you have to.. but still go with
the high flow element
EDIT
If you go with Wix make sure its a RACE element
for the added flow
wave

Last edited by MR_P_BODY; 01/06/17 08:04 PM.