Quote:
Can't you mount it on the other side of the block where the bigger hole is with some small pipe and fittings and just angle it to the side where you can see it? I've seen this before but don't know what size pipe and fittings to get
(1) use a double female "reducer bushing" 1/4-1/8 (NPT) along with (2) a 1/4 male nipple of the length you need (has male threads on each end) then the gauge brass fitting will screw into the 1/8 female end of the reducer bushing the same as if you installed it in the block port on the pass side. several bucks at your hardware/plumbing supply store for the (2) pieces needed
live every 24 hour block of time like it's your last day on earth
| 
