Quote:

I run a low deck with "pro magnums". A couple of comments to add. Yes, custom pushrods are generally needed. Also 1-2 threads has worked well for me on the adjusters.

I used solid rocker shaft hold downs. To get the rockers centered, I had to mill a little off the sides of the hold downs and then use shims to get things lined up. Otherwise, sweep over the valve was great with .55" lift cam.


By solid hold downs, do you mean removable shaft stands? Hoe much sweep is great with a .55" lift cam?

Mike Beachel

I didn't write the rules of math nor create the laws of physics, I am just bound by them.