Quote:

---

Quote:

---

Quote:

---

Quote:

---

Quote:

---

I just bought and installed an Ammco 9000# two post lift, wish I'd done it years ago.

---

Looking at the two post. Easier to work on vehicle.
Plus I'm sorta leaning towards the Bendpak.
Now for a garage that is 24" wide and 36" deep, where is the best place to put it?
I'm thinking as far back as possible to either side keeping enough room to work around it.
Thanks for the input
Matt

---

I mounted mine straight in from the big door, towards
the back... I have about 3' past the end of my truck
on the hoist... on the right side is my machine shop
and office area.. left of the hoist has my 38 in it
and cabinets

---

So Mike, I take it that your shop is 24x36?
My door will be at the front like yours but I want a smaller door at the back left for riding lawn mover snow blower ect...
With the hoist centered, do you have enough room around it?
Matt

---

Mine is 32' deep and 36' wide.. yes I can get around
it easy..the right 1/3 of the building is my machine
shop and office.. the left 1/3 is car storage and
cabinets and my big buffer and blast cabinet..
also my welding bench is on the machine shop side
(thats 40"x 7')... you NEVER have enough room
Also.. what will you do for heat... I highly recommend
the floor heat... works great and its cheap to run

---