drill size for priming engine

Print Thread

Re: drill size for priming engine [Re: gdonovan] #1749841 02/10/15 11:36 PM 02/10/15 11:36 PM
Joined: Jun 2005 Posts: 5,102 Western Md. skicker "The Champ"
skicker "The Champ" Joined: Jun 2005 Posts: 5,102 Western Md.	Quote: primed a 383 in a cold garage with an 18V cordless drill, no problems at all. Used my 18v Dewalt as well...no issues. ...FAFO...

Entire Thread
Subject	Posted By	Posted
drill size for priming engine	ryanf	02/09/15 05:22 AM
Re: drill size for priming engine	NITROUSN	02/09/15 05:24 AM
Re: drill size for priming engine	ryanf	02/09/15 05:30 AM
Re: drill size for priming engine	NITROUSN	02/09/15 05:34 AM
Re: drill size for priming engine	ryanf	02/09/15 05:37 AM
Re: drill size for priming engine	Supercuda	02/09/15 05:48 AM
Re: drill size for priming engine	ryanf	02/09/15 05:56 AM
Re: drill size for priming engine	Supercuda	02/09/15 06:00 AM
Re: drill size for priming engine	E-Ticket	02/09/15 06:03 AM
Re: drill size for priming engine	Cab_Burge	02/09/15 06:35 AM
Re: drill size for priming engine	71rm23	02/10/15 08:44 PM
Re: drill size for priming engine	mikemee1331	02/10/15 09:42 PM
Re: drill size for priming engine	RapidRobert	02/10/15 11:31 PM
Re: drill size for priming engine	dogdays	02/11/15 12:41 AM
Re: drill size for priming engine	sportfury70	02/11/15 01:47 AM
Re: drill size for priming engine	DDodger	02/12/15 09:32 PM
Re: drill size for priming engine	440W8 Duster	02/09/15 05:24 AM
Re: drill size for priming engine	cudatom	02/09/15 05:27 AM
Re: drill size for priming engine	RapidRobert	02/09/15 05:29 AM
Re: drill size for priming engine	gtx6970	02/09/15 05:36 AM
Re: drill size for priming engine	AndyF	02/10/15 10:03 PM
Re: drill size for priming engine	gdonovan	02/11/15 03:02 AM
Re: drill size for priming engine	skicker	02/11/15 03:36 AM
Re: drill size for priming engine	LaRoy Engines	02/11/15 04:11 PM
Re: drill size for priming engine	70AARcuda	02/11/15 04:16 PM
Re: drill size for priming engine	HPMike	02/11/15 04:27 PM
Re: drill size for priming engine	SportF	02/11/15 09:34 PM
Re: drill size for priming engine	383man	02/13/15 02:44 AM
Re: drill size for priming engine	Twostick	02/11/15 09:35 PM
Re: drill size for priming engine	ryanf	02/11/15 11:28 PM
Re: drill size for priming engine	rftroy	02/11/15 11:48 PM
Re: drill size for priming engine	RapidRobert	02/12/15 03:12 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To