Quote:
there is a bunch of LS heads that claim to go over 400 so I'm not really to impressed by a piece of paper that says a hemi head flowing worse than a LS
head
With factory castings?
LPE CNC L92 LS3 Flow Specs
Intake valve lift / Exhaust valve lift
.200 - 158 cfm / .200 - 116 cfm
.300 - 230 cfm / .300 - 161 cfm
.400 - 282 cfm / .400 - 201 cfm
.450 - 302 cfm / .450 - 213 cfm
.500 - 322 cfm / .500 - 220 cfm
.550 - 340 cfm / .550 - 226 cfm
.600 - 350 cfm / .600 - 231 cfm
.650 - 358 cfm / .650 - 234 cfm
.700 - 344 cfm / .700 - 237 cfm
Last edited by 72Swinger; 11/16/12 12:01 AM.
