Quote:

Thanks for sharing pictures! How long of a top bar were you able to sneak in there? I know mine are short, but looking at the fox body stuff, they don't seem so bad, and mine are straight in the car. The triangulation of the fox body stuff shortens the length of the bar parallel to the chassis. I'm not sure what the fox body upper bar length is yet, but if we assume they are 10" long, using good old trigonometry, that gives us an effective length of 8.66" parallel to the chassis.

-Kenny



Sorry I would have to measure it when I get home, I cut a lot of that stuff out of the car when I redid the rear because of issues with the leafs, but there is probably enough left to measure it center to center....





'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk