These valve covers WILL NOT seal

Print Thread

Re: These valve covers WILL NOT seal [Re: ProSport] #1064379 08/30/11 10:45 PM 08/30/11 10:45 PM
Joined: Mar 2007 Posts: 72 rising sun, maryland F fastcoronet member
fastcoronet member F Joined: Mar 2007 Posts: 72 rising sun, maryland	mine were by Summit and they cost around 250.00 I feel Summit stop selling them because of the non sealing problems. Once I got the welds flat I had to buy new bolts I went with Stainless. I have them on and off now for 6 years ateast.

Entire Thread
Subject	Posted By	Posted
These valve covers WILL NOT seal	ProSport	08/28/11 05:10 PM
Re: These valve covers WILL NOT seal	SB412DUSTER	08/28/11 05:17 PM
Re: These valve covers WILL NOT seal	fishy340	08/28/11 05:20 PM
Re: These valve covers WILL NOT seal	ProSport	08/28/11 06:17 PM
Re: These valve covers WILL NOT seal	therocks	08/28/11 06:27 PM
Re: These valve covers WILL NOT seal	Deepockets	08/28/11 06:46 PM
Re: These valve covers WILL NOT seal	stroked470	08/28/11 07:37 PM
Re: These valve covers WILL NOT seal	Butch	08/28/11 08:32 PM
Re: These valve covers WILL NOT seal	540DUSTER	08/28/11 08:53 PM
Re: These valve covers WILL NOT seal	POS Dakota	08/29/11 01:26 AM
Re: These valve covers WILL NOT seal	68shifter	08/29/11 01:51 AM
Re: These valve covers WILL NOT seal	max_maniac	08/29/11 02:53 AM
Re: These valve covers WILL NOT seal	Chad Bittle	08/29/11 03:01 AM
Re: These valve covers WILL NOT seal	codfish	08/29/11 03:07 AM
Re: These valve covers WILL NOT seal	493_DART	08/29/11 08:20 PM
Re: These valve covers WILL NOT seal	fishy340	08/29/11 08:37 PM
Re: These valve covers WILL NOT seal	Wedgeman	09/01/11 02:21 AM
Re: These valve covers WILL NOT seal	MR_P_BODY	08/29/11 04:08 AM
Re: These valve covers WILL NOT seal	TRENDZ	08/29/11 11:03 AM
Re: These valve covers WILL NOT seal	70HemiGTX	08/29/11 12:26 PM
Re: These valve covers WILL NOT seal	JohnRR	08/29/11 09:55 PM
Re: These valve covers WILL NOT seal	SLOW67	08/29/11 10:49 PM
Re: These valve covers WILL NOT seal	ProSport	08/29/11 11:42 PM
Re: These valve covers WILL NOT seal	VernMotor	08/29/11 11:58 PM
Re: These valve covers WILL NOT seal	ProSport	08/30/11 12:16 AM
Re: These valve covers WILL NOT seal	Quicksilver440	08/30/11 12:33 AM
Re: These valve covers WILL NOT seal	Blusmbl	08/30/11 01:05 AM
Re: These valve covers WILL NOT seal	ProSport	08/30/11 02:18 AM
Re: These valve covers WILL NOT seal	fastcoronet	08/30/11 02:32 AM
Re: These valve covers WILL NOT seal	ProSport	08/30/11 02:36 AM
Re: These valve covers WILL NOT seal	fastcoronet	08/31/11 02:45 AM
Re: These valve covers WILL NOT seal	mopacltd	08/29/11 05:47 PM
Re: These valve covers WILL NOT seal	ccarson	09/01/11 04:35 AM
Re: These valve covers WILL NOT seal	Georg	09/01/11 12:39 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To