Previous Thread
Next Thread
Print Thread
Page 2 of 2 1 2
Re: BIG Thanks to Dwayne Porter [Re: HDNMOPERS] #2608595
01/18/19 02:40 PM
01/18/19 02:40 PM
Joined: Mar 2007
Posts: 3,275
West Coast, USA
jbc426 Offline
master
jbc426  Offline
master

Joined: Mar 2007
Posts: 3,275
West Coast, USA
Dwayne guide me through giving him enough information that allowed him to pinpoint the core issue that led the roller bearings in only my T&D exhaust rockers failing. The intake rockerarm bearings were fine. It was a bit baffling until he quickly identified what was going wrong and pinpointed the root cause.

He freshened up my heads, spec'd me a mechanical roller cam and helped me design and spec a reverse dome piston to drop my compression 2 points and retain the same weight as the original 12 to 1 slugs. The motor has never run and rev'd so smooth.

All this over the phone. He is a true resource with a wealth of knowledge and great customer service.


1970 Plymouth 'Cuda #'s 440-6(block in storage)currently 493" 6 pack, Shaker, 5 speed Passon, 4.10's
1968 Plymouth Barracuda Convertible 408 Magnum EFI with 4 speed automatic overdrive, 3800 stall lock-up converter and 4.30's (closest thing to an automatic 5 speed going)
Re: BIG Thanks to Dwayne Porter [Re: HDNMOPERS] #2608824
01/19/19 12:01 AM
01/19/19 12:01 AM
Joined: Jun 2006
Posts: 660
Virginia
V
varunner Offline
mopar
varunner  Offline
mopar
V

Joined: Jun 2006
Posts: 660
Virginia
Dwayne did a set of heads for me, and then answered question after question on my engine build. Great guy for sure.

Re: BIG Thanks to Dwayne Porter [Re: BradH] #2608864
01/19/19 01:52 AM
01/19/19 01:52 AM
Joined: Jan 2003
Posts: 10,766
Central Valley, CA.
Quicksilver440 Offline
I Live Here
Quicksilver440  Offline
I Live Here

Joined: Jan 2003
Posts: 10,766
Central Valley, CA.
Though I’m not on here much anymore...Dwayne and Brad have helped me multiple times over the last 15 years...lol. Great guys!

Rob

Page 2 of 2 1 2






Powered by UBB.threads™ PHP Forum Software 7.7.1