Previous Thread
Next Thread
Print Thread
Page 2 of 2 1 2
Re: Ramcharger [Re: ric3xrt] #2511252
06/21/18 10:45 AM
06/21/18 10:45 AM
Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
ric3xrt Offline OP
pro stock
ric3xrt  Offline OP
pro stock

Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
Worked on the Driver's side headers the other night, had to hack the LX headers apart , got the last 2 tubes done, this weekend I'll work on the front two and the collector.

D-side header a.jpgD-side header b.jpg
Re: Ramcharger [Re: ric3xrt] #2512115
06/23/18 12:10 PM
06/23/18 12:10 PM
Joined: Jun 2005
Posts: 2,776
Ontario Canada
M
MattW Offline
master
MattW  Offline
master
M

Joined: Jun 2005
Posts: 2,776
Ontario Canada
Be interesting to find out how much room you have.
I have a 436 cid W9 that I will be doing the same.
Keep the photos coming.
Matt

Re: Ramcharger [Re: ric3xrt] #2521205
07/12/18 09:04 PM
07/12/18 09:04 PM
Joined: Jan 2008
Posts: 2,195
ILLINOIS
V
volaredon Offline
top fuel
volaredon  Offline
top fuel
V

Joined: Jan 2008
Posts: 2,195
ILLINOIS
arrrrgh….. KISS... should have stayed w/a big block and 4bbl.
helping my son with a motor swap in his 89 RC, going from the biggest turd of a 360 I have ever experienced, (TBI motor) to a 76 360 with a mild cam a 4 bbl CARB and EQ heads..... same trans same mounts, more power, dead simple dependable carb. no computer needed. or wanted.

Re: Ramcharger [Re: ric3xrt] #2523077
07/17/18 02:50 PM
07/17/18 02:50 PM
Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
ric3xrt Offline OP
pro stock
ric3xrt  Offline OP
pro stock

Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
Tired of Big Blocks myself , this Ramcharger started out as a D code 440 4x2 , for me it's just about being different


Truth has no agenda, but those with an agenda make their own truth.
Some of us are so open minded they only see their View



Re: Ramcharger [Re: ric3xrt] #2524477
07/20/18 12:14 PM
07/20/18 12:14 PM
Joined: Mar 2008
Posts: 9,550
Sacramento CA
M
Morty426 Offline
master
Morty426  Offline
master
M

Joined: Mar 2008
Posts: 9,550
Sacramento CA
Originally Posted By ric3xrt
Tired of Big Blocks myself , this Ramcharger started out as a D code 440 4x2 , for me it's just about being different


Good for you up

Re: Ramcharger [Re: ric3xrt] #2528597
07/29/18 01:21 PM
07/29/18 01:21 PM

R
RWG75
Unregistered
RWG75
Unregistered
R



The popular swap for RCs is recent years has been a Cummins. Have seen a few variations on the theme but most seem to keep the trans, xfer, axles from the donor pick up. Have even seen 2000ish dash swapped in to 70s bodies.

I did consider scooping up this roller as a cheap place to put one of my spare 440s but had a life change event. I kinda like the G3 Hemi idea and may have accidentally nudged him in that direction. We got in to a tangent discussion about the hack job LS install in a pop top that was on craigs.

I'm kinda surprised how much fab is going in to making it fit and wondering if truck exhaust wouldn't have bolted in. If I know anything about this guy, I know this: he's having more fun doing this than just bolting in another RB and when it's running it will melt the tires.

Re: Ramcharger [Re: ric3xrt] #2528695
07/29/18 05:46 PM
07/29/18 05:46 PM
Joined: May 2003
Posts: 3,017
N.W. Florida
F
Fat_Mike Offline
master
Fat_Mike  Offline
master
F

Joined: May 2003
Posts: 3,017
N.W. Florida
I'm diggin' it. Any progress???

Re: Ramcharger [Re: ric3xrt] #2531483
08/04/18 01:51 PM
08/04/18 01:51 PM
Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
ric3xrt Offline OP
pro stock
ric3xrt  Offline OP
pro stock

Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
yes and no,
the Driver's side header is done, the passenger side is hanging on the wall waiting for me to get back to it, the rear is Narrowed and waiting for me to decide if I'm going 4 link or Nascar truck arm. Trans X member for the TKO 600 is done. rest is waiting on the body guy to tell me when he can take the tub and work on it.

I know the 03-08 and 09-current truck exhaust manifolds will work, there are some exit issues but nothing that can't be dealt with ….but I want headers.
I didn't try the 03-08s Truck headers because of the port shape. I can't see me putting any engine in this Ramcharger that would use the square port heads.
I didn't want to try the 09 and latter headers in-till I knew if I could make the LX headers work...….learn from my mistake boys and girls.. don't go this route too much of a pain in the a$$...by the time it's all said and done I would of been better off making a custom set of headers.
I will try a set of the 09 and later headers some time in the next 2 weeks.I need a set for my 2014 so I have to buy them anyway.

Rick you were about 1/4 the nudge, the other 1/4 was the LS Ramchager and the last 1/2 was the guy who watched too many Fast and loud episodes and try to buy the Ramcharger for $300...because
" you know it's a Dodge no one pays for a Dodge , I'm doing you a favor, look at the garage space you'll have after you sell me this worthless Pile of crap,mater of fact , how about you give me $100 and I won't charge you to load that chunk of Dodge on my trailer"

Yes that was the conversation.

Last edited by ric3xrt; 08/15/18 05:10 PM.

Truth has no agenda, but those with an agenda make their own truth.
Some of us are so open minded they only see their View



Re: Ramcharger [Re: ric3xrt] #2533245
08/08/18 12:47 PM
08/08/18 12:47 PM
Joined: Jun 2005
Posts: 2,776
Ontario Canada
M
MattW Offline
master
MattW  Offline
master
M

Joined: Jun 2005
Posts: 2,776
Ontario Canada
WOW.
LOL
I usually end that conversation with " I wouldn't sell you a pencil.
"DRIFT"

Re: Ramcharger [Re: ric3xrt] #2577489
11/12/18 02:10 PM
11/12/18 02:10 PM

R
RWG75
Unregistered
RWG75
Unregistered
R



You can give me $100 and walk out of here or you can limp out for free.

Just a thought.

Re: Ramcharger [Re: ric3xrt] #2606715
01/15/19 12:27 AM
01/15/19 12:27 AM
Joined: Jan 2008
Posts: 4,254
Canada
WO23Coronet Offline
master
WO23Coronet  Offline
master

Joined: Jan 2008
Posts: 4,254
Canada
Any updates on the Ramcharger?

Re: Ramcharger [Re: ric3xrt] #2611463
01/24/19 09:57 AM
01/24/19 09:57 AM
Joined: Jan 2003
Posts: 21,599
San Jose,CA
migsBIG Offline
YouTube is my go-to news source
migsBIG  Offline
YouTube is my go-to news source

Joined: Jan 2003
Posts: 21,599
San Jose,CA
yes, waiting to see any updates too.

Page 2 of 2 1 2






Powered by UBB.threads™ PHP Forum Software 7.7.1