Page 2 of 2 < 1 2
Topic Options
#2466443 - 03/14/18 02:03 PM Re: A Engine Offset Cam Keys? [Re: 340Cuda]
gtsdude Offline
super stock

Registered: 10/28/05
Posts: 834
Loc: S.E. Minnesota
Originally Posted By 340Cuda
Originally Posted By gtsdude
I used this one, just remember its the camshaft you are moving, not the crank like this one is made for. If you want 4 degrees advance, get a 2 degree key.

I have a belt drive now and don't have to deal with this but cam timing is based on 720 degrees. So a 4 degree key will affect the Intake Lobe Center 4 degrees. Correct?

That is correct as long as it is a 4 degree cam key not a a 4 degree crank key you are using as a cam key.

#2466477 - 03/14/18 03:05 PM Re: A Engine Offset Cam Keys? [Re: gtsdude]
pittsburghracer Offline

Registered: 02/02/05
Posts: 12391
Loc: PA.
I hope you degree this cam in because who knows where it’s installed at. I’ve found them up to 22 degrees off
1970 Duster
Edelbrock headed 408
6.143@110.89 mph
9.73@135.05 mph shifting at 6700 RPM
422 Indy headed small block

Untitled by John Cadamore, on Flickr

Page 2 of 2 < 1 2

Sponsored Link
Forum Stats
25,196 Registered Members
32 Forums
187,587 Topics
2,184,623 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
1966 Coronet 440 Convertible - how rare is it ?
by Trulyvintage
57 minutes 56 seconds ago
Pinion contact thoughts.
by Scamp408
Today at 11:24 AM
All Access Subscribers
by Leigh
Today at 10:38 AM
$14,998 gets the Hellcat crate now
by DaveRS23
Today at 10:02 AM