E Body - Parts For Sale - 1st Quarter

One Challenger door window rubber weatherstrip. $10

1970 Challenger driver side taillight lens. $60

Shaker hood decal. A couple of small blems. $5

71 B/E-body ignition light harness with delay relay. $75

E-body fresh air heater box vent cable with round knob. $20

1970 New E-body rally dash woodgrain decals for 4 switch dash. $40

70 Challenger dash speaker grill #2984783. $40

Shaker hood 440 six pack air cleaner base plate support brackets. New. $50

1971 Challenger passenger side rear quarter end cap molding. $30

Set of new E-body side-view mirror mounting screws for 70-74 E-bodies/71-72 B-bodies. $15

70-74 E-body brake pedal switch and bracket. $20

71 B/E-body ignition light harness complete with delay harness. $100

1970 E-body ignition key lamp. $75

Challenger 1 passenger side and 4 driver's side front parking lenses. $20 each

71-74 E-body driver's side dash bezel. $35

Nice original E-body passenger side kick panel. Is black now but looks like it was originally burnt orange in color. $25

One pair of torsion bar adjusting bolts and nuts. $30

Challenger driver side front side marker assembly. Lens cracked and plug is missing but bezel has good chrome. $20

2 Pair of new E-body horn brackets, 1 long style, 1 short style. $15 pair

1970 Reproduction Challenger Owner's Manual. $15

1971 Challenger Owner's Manual. $25

1971 Dodge Scat Pack brochure. $20

1970 Dodge Scat Pack brochure. $20

1970 Dodge dealer sales brochure. $20

New 1970 Challenger illustrated facts and features manual. $8

Chilton's 1965-72 Barracuda/Challenger repair and tune-up guide. As-new condition. $40

October 1969 issue of Dodge News magazine featuring the new 1970 models. $20

1970 Challenger R/T Dream Machines trading card #29 featuring a purple Challenger. $3

440 Six Pack key ring that looks like a 440 Six Pack air cleaner lid. $20

Challenger R/T beer bottle coozie. Blue with white lettering. $8

2009 Dodge Challenger dealer sales brochure. $10

Prices do not include shipping. No Paypal.

gt340 at yahoo.com

Needs a little love. 175.00 U.S. shipping included. Email moparmafia@yahoo.com

Convertible top frame in good condition. $1500 must pick up in middle Tennessee. Email moparmafia@yahoo.com

I have for sale a nice 1970 1971 1972 automatic transmission style cross member with mount.
It is priced at $125.00 plus shipping.
If you are interested contact me at: jnborzych@gmail.com with your zip for a shipping quote.
Thanks!

I have for sale some 1970-1974 automatic transmission console parts for sale.
Spring SOLD!
Bracket $35.00
Upper shift rod $50.00 each
Torque shaft $75.00 each
The prices do not include shipping.
If you are interested contact me at: jnborzych@gmail.com with your zip for a shipping quote.
Thanks!

Nice steering wheel for 1972-74 models and will for other years as well and other model cars. Missing cap, but those are easy to find. $39 plus shipping. PayPal or US post office money order is ok. Located in San Jose, CA.

Rear trailer tie down brackets for most A, B, or E body vehicles (doesn’t fit the 7 ¼ rear axle). These piggyback onto the bottom of the stock shock plate mounting nuts and then 4 more nuts hold these tie down brackets on. You must have enough extra thread hanging down on the bottom of your U-bolts to fit the ¼” thick tie down bracket and another nut. No disassembly necessary, just slide the brackets over the extra thread on your U-bolts, install the included nuts, tighten them down and you’re done. Takes about 10 minutes to install. These eliminate all the hassles that come with using axle straps. Fits A, B, and E body cars with the standard shock plates like shown in the pictures. $60.00 per pair plus shipping. I also have these available for cars with CalTracs, same price. Made in the USA.
Email mrrandyj@aol.com

This is a very nice original 1970 E brake assembly. I have not seen one this nice in a while, no pitting or broken parts paint looks very original.



​$240.00 and split the shipping in US from 55092

Nice straight rust free 1973-4 Cuda right fender that has been converted to a 70.
350.00
Plus shipping.
Take check, MO or PayPal
Free delivery with pre-paid to the following shows
Mesquite NV Car show Jan
Tri-State swap meet Denver CO. Feb
MATS Vegas March 15th-16th
Spring Fling L.A. CA
Have lots of parts. Feel free to PM me with your needs.
Some of my pictures are to big. Can email or text more pictures.

Really good condition. No damage or rust. Date code is 2759
125.00
Plus shipping.
Take check, MO or PayPal
Free delivery with pre-paid to the following shows
Mesquite NV Car show Jan
Tri-State swap meet Denver CO. Feb
MATS Vegas March 15th-16th
Spring Fling L.A. CA
Have lots of parts. Feel free to PM me with your needs.
Can email or text more pictures.

From a 72 but should fit 70-74. Under dash A/C harness. Adds onto dash harness. Real good drivers condition with no damage.
85.00
Plus shipping.
Take check, MO or PayPal
Free delivery with pre-paid to the following shows
Mesquite NV Car show Jan
Tri-State swap meet Denver CO. Feb
MATS Vegas March 15th-16th
Spring Fling L.A. CA
Have lots of parts. Feel free to PM me with your needs.
Can email or text pictures.

Various Mopar A, B & E body parts for sale
OEM 3 Nipple breather $45.00
Fine Lines Metal Rear Axle Brake Line 1965-1969 C-body, 1968-70 B-Body, 1970-74 E-Body $30.00
RARE 1970 E Body Steering column lock tube with bushing $50.00
Aftermarket Sway bar brackets, poly bushing and mtg hardware $15.00
B E & A reproduction 1970-71 CUDA one long tail panel trim, located above bumper or below trunk lid $65.00
OEM refinished by PLUMBEEPER Rim Blow steering wheel with original Cuda fish-cap $1701.00 or best offer
Heater hose stencil kit with instructions for 1970 A/E body non air # 860457 83044 $40.00
Jack & black base $55.00


Contact via PM or email for questions or pics.
zabinsky4@msn.com
Cash or USPS Money Order ONLY, buyer pays shipping.

Thanks for the ad MOPARTS!

NOS 1970 71 B,E Body Cuda GTX Dodge Plymouth 440-6 Vacuum Advance Unit 3514332 in the factory box and tested good......$350

Thanks

716-997-0070

BAKURRUDA@AOL.COM

NOS 1970-71 Cuda complete side marker assemblies part numbers:

- 3620710 (S/N 3403630) right front assembly
- 3620711 (S/N 3403631) left front assembly
- 3420715 (S/N 3403641) left rear assembly
- 3420714 (S/N 3403640) right rear assembly

*each assembly consistes of the side marker housing,retainer,reflector,light and nuts*

All are complete with the only acception being missing 2 smaller nuts that hold the small light in the housing. I have a pair of used ones I will include if wanted at n/c.


$2,775 for the complete set of 4 plus shipping.

With people are asking over a thousand dollars for just 1 assembly, this is a good price for a complete set. Almost impossible to find a complete set of assemblies ( each housing is specific to the particular quarter or fender they are being used on).

Thanks

716-997-0070

bakurruda@aol.com

Have 5. Various condition but are Western doors.
Bare shells
150-250.00ea
Plus shipping.
Take check, MO or PayPal
Free delivery with pre-paid to the following shows
Mesquite NV Car show Jan
Tri-State swap meet Denver CO. Feb
MATS Vegas March 15th-16th
Spring Fling L.A. CA
Have lots of parts. Feel free to PM me with your needs.
Can email or text more pictures.

Here is an NOS 1971 440-6 trans kickdown linkage rod. There is a part number tag on the piece and it has been moved around many shelves but since the tag is not attached, if you have any doubt that this is not either NOS or the correct part please message me. I've had this for many years and now it is time to go. In examining the ends I don't see any evidence of installation. $350.00 plus $30.00 shipping in continental US.
I take Paypal via friends and family....
Email to 71Shaker@gmail.com

for sale: 1971 Challenger rubber bumpers, front & rear, Gene Gregory reproductions, new, never installed, $3000. Delivery to Spring Fling show, in Van Nuys, CA. April 20th 2024.
e-mail: ebodycab@msn.com
Phone: 818-426-8685

SOLDTwo NOS tie rod end 3420154
SOLD One NOS tie rod end 3420155
SOLD One NOS tie rod end 2448383

All in original boxes or bags.

$275.00 each or $1,200 for all six shipped in the CONUSA

MOPAR V8 ELECTRONIC IGNITION TUNE UP KIT, INCLUDES A SHELL BRASS INSERT,RIBBED,TAN HD BAKELITE DISTRIBUTOR CAP,STANDARD NORS ROTOR,&NOS MOPAR PCV VALVE ,WILL FIT;
1972-1973-1974 E-body challenger&cuda

V8 318-340-360-$35 mailed insured/tracked priority mail

cowgerwillliam035@gmail.com

NOS hemi heat tubes with part number label still intact.

$1,000 obo

Thanks!

NOS Yes! BUT, it was stored where there was a water leak and one corner, drivers side upper most has small pin holes from the water collecting there. Easy fix. $200 plus shipping.

1966 to 1971 426 HEMI harmonic balancer, original, not reproduction, not cracked in the keyway area $750.00 (708) 288-2879

Photo 1, 2 1970-74 E Body Upper Control Arms. Used, $60 For The Pair + Shipping, Payment via US Postal Money Order Only! Shipping US Address Only!
Photo 3, 4 1970-74 E Body Lower Control Arms With Sway Bar Mount. Used, $250 For The Pair + Shipping, Payment via US Postal Money Order Only! Shipping US Address Only!
Call Steve 810-629-1097

Note: Also Fit 71-74 B Body

70 E Body Automatic Speed Shift Floor Shifter. Used, $450 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

72-74 E Body Rear Side Marker Light. Used, $10 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

72-74 E Body Pair of Fender Turn Signals, Used, $75 for the pair + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

73-83 All Body Models Key Warning Buzzer #3747280, Used $10 + Shipping. Payment: US Money Order Only! Shipping US Address Only!
Call Steve 810-629-1097

73-74 E Body Cuda / Challenger Coat Hooks. Used $25 A Pair + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!
Call Steve 810-629-1097

71-74 E Body Radio 2 Piece Knob, Single Knob, 2 Pieces Inner/Outer. Used, $10 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Cuda / Challenger Radio Support Bracket. Used, $15 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Rear Speaker Harness #2889614, Used, $20 + shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Note: Harness goes from divers side kick panel to rear deck!

70-74 E Body 3 speaker Dash Bracket. Used, $25 + Shipping. Payment via US Postal Money Order Only!. Shipping: US Address Only!
Call Steve 810-629-1097

72-74 E Body Cuda Set Of Four Tail Lights. Used $50 + Shipping. Payment: US Money Order Only! Shipping US Address Only!
Call Steve 810-629-1097

Photo 1-2: 70-74 E Body Cuda / Challenger Overhead Console Center Piece. Used, $350 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only

Photo 3:70-74 E Body Overhead Console Trim, Used, $100 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!

Photo 4:70-74 E Body Cuda / Challenger Complete Overhead Console Harnesses With Low Fuel Relay Used $250 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!

Call Steve 810-629-1097

70-74 E Body Trunk Deck Lid Latch, Used, $10 + shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097.

72-74 E Body Cuda Trunk Latch, Linkage, Rod Cover, Used, $45 + Shipping, Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 Challenger NOS Nameplate Fender Trunk Emblem, # 03444938. $45 + shipping. Payment US Postal Money Order Only! Shipping: US Address Only!
Call Steve, 810-629-1097

70-74 E Body Cuda Challenger Non Rally Light Bar 3 Lights #2984126 With Light Harness. Used, $75 + Shipping.

70-74 E Body Cuda Challenger Non Rallye Light Bar Harness 3 Lights. Used, $25 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Cruise Control Servo Bracket, #2863703 Used $100 + Shipping, Payment US Postal Money Order Only! Shipping: US Address Only!
Note: This is the correct bracket not like the $200 one you see on ebay

70-74 E Body Cruise Control Cable Bracket, Used $50 + shipping, Payment US Postal Money Order Only! Shipping: US Address Only!
Note: This bracket bolt off the Brake Master Cylinder / Booster

Call Steve 810-629-1097

71-74 E Body Speed / Cruise Control / Turn Signal Lever. Used, $50 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Door Handle Gaskets, Used, Set Of Two $10 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Instrument Cluster Non Rally. Used, $100 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Cuda Challenger Cowl Vent Grill #35007612 Left Side Drivers. Used, $25 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Hood Hinges With Springs. Used, $150 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70 71 Cuda Convertible Interior Quarter Trim Panels


Strictly driver quality. There are no speaker holes, but obviously there are scratches and a few drill holes.


With some refinishing work they can be much better, or they can of course be re-covered by companies such as Just Dashes.


250.00 plus shipping. PayPal preferred. SOLD! SOLD! SOLD!


Bill Rolik


bremotorsports@verizon.net


201-394-5533 Cell/Text

NOS Mopar original paper floor mats typically provided by the dealership during service.


These are the real deal!


25.00 per pair plus shipping. PayPal preferred.


Bill Rolik


bremotorsports@verizon.net


201-394-5533 Cell/Text

70-74 E Body Cuda / Challenger Under Dash Heater / A/C Wiring Harness #2983247, Used $20 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!
Call: Steve 810-629-1097

70-74 E Body Cuda / Challenger AC Outer Vent. Used $60 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!
Call Steve 810-629-1097

70-71 E Body Cuda Trunk Latch With Rod. Used $70 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!
Call Steve 810-629-1097

Photo 1. 70 E Body Cuda / Challenger Horn Relay #2926327. Used $15 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!
Call Steve 810-629-1097

Photo 2. 71-74 E Body Cuda / Challenger Horn Relay #3513206. Used $15 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!
Call Steve 810-629-1097

Photo 3. E Body Key Buzzer Relay #2983872. Used, $20 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Cuda / Challenger Heater Control Bracket. Used $15 + Shipping. Payment: US Postal Money Order Only!. Shipping US Address Only!
Call Steve 810-629-1097

70-74 E Body Cuda / Challenger Non Rallye Heater Control. Used $45 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!
Call: Steve 810-629-1097

70-74 E Body Cuda / Challenger Rally, Non Rally Temperature Control Light. Used, $10 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Cuda Rear Seat Panel Driver Side. Used $175 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!
Call: Steve 810-629-1097

70 E Body Mirror Gaskets #3454052, Used $10 For The Pair + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!
Call: Steve 810-629-1097

70-74 E Body Cuda Headlamp Mounting Bracket. New $20 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!
Call: Steve 810-629-1097

66-1974 A,B,E Body OEM Windshield Washer Reservoir Cap. Used, $5 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Cuda, Challenger Window Stabilizer Bracket, Used $10 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!
Call Steve 810-629-1097
Note: Quantity Available!

70-74 E Body Cuda Barracuda Top Quarter Belt Molding / Trim. Used Pair $140 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!
Call Steve 810-629-1097

70-74 E Body Barracuda Cuda License Plate Light. Used $50 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!
Call Steve 810-629-1097

70 E Body Cuda NOS AAR Grill Inserts #2998166, #2998167 New $700 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!
Call: Steve 810-629-1097

70-72 E Body Cuda / Challenger Vapor Liquid Separator. Fits 1970 with n65, 1971 and early 1972. Used, $125 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Barracuda / Cuda Inside Side Window Trim. Used, $65 Each, Both For $125 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!

70-74 E Body Barracuda / Cuda Inside Top Windshield Trim. Used, $60 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!

Call Steve 810-629-1097

70-74 B-E Body Brake Light Switch With Bracket. Used, $35 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Photo 1. 70 B / E Body Brake Light Switch With Bracket #3488854
Photo 2. 71-74 B / E Body Brake Light Switch With Bracket #3488482

70-74 E Body Cuda / Barracuda Vinyl Top Rear Trim. Used $250 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!
Call Steve 810-629-1097

70-74 E Body Rear Window Defrost Vent. Used $60 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!

70-74 E Body Rear Window Defrost Hose Clamp. Used $15 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!

70-74 E Body Rear Window Defrost Blower Motor. Used, $75 + Shipping. Payment via US Postal Money Order. Shipping: US Address Only!

Call Steve 810-629-1097

70-74 E body Rear Defrost Vent 1.jpg

70-74 E Body Cuda / Challenger Temperature Control Cable # 2884730. Used, $35 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Rear Seat/Trunk Jute Padding Divider. Year One #DJE70 New $20 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!
Call Steve 810-629-1097

70-74 E Body NOS 4 Door Hinge Pins #06023576. New $20 + Shipping. Payment: US Postal Money Order Only! Shipping US Address Only!
Call Steve 810-629-1097

70-74 E Body Cuda / Challenger Dome Light Housing And Lens. Used, $25 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E body Front Spindle Lock Nut Kit, Used, $7.50 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097
Note:3 in stock

Dodge, Plymouth, Chrysler Inside Remote Mirror Nut. Used, $20 + shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097. Used, $20 + shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E-B Body Floor Shifter Replacement Plate / With Instruction. New, $70 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70 E Body Headlight Warning Buzzer Diode # 2983595. Used, $75 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Rallye Switch Plate. Used, $15 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

72-74 E Body Rallye Dash 150 Speedometer. Used, $50 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Note: Need Needle!

70-74 E Body Rallye Dash Clock. Used, $75 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Rallye Dash 70-74 E Body Rallye OIl Pressure Gauge. Used, $25 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Note: Need Needle!
70-74 E Body Rallye Dash Temperature Gauge. Used, $50 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Rallye & Standard Dash Clusters Condenser. Used, $15 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Cuda / Challenger Quarter Glass Weatherstrip Pillar U Jamb Seal. Used, $20 A Pair + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body K Member Splash Shield Driver Side. Used, $25 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-71 E Body Gran Coupe Door, Rear Seat Panels. Used $1000. Payment: US Postal Money Order Only! Shipping US Address Only!
Pick Up Fenton Mi. Payment Cash at pick up.
Call Steve 810-629-1097

Note: Panels came out of a 71 Gran Coupe.
Includes: Front Arm Rests And Rear Ash Trays (Not In Photos)
Panel need a good cleaning or paint.

70-74 B / E Body Battery Tray Bracket. Used, $15 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Right Rear Quarter Glass Window Track. Used, $75 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70-74 E Body Cuda / Challenger Rally A/C Temperature Control Switch. Used, $250 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Note: Switch is in very nice shape!
Photos are not very good, chrome pieces on switch do not look like in the photos!

1972-1976 Dodge Challenger 14" Hubcaps, Set Of Four. Used, $100 + Shipping. Payment via US Postal Money Order Only!. Shipping: US Address Only!
Call Steve 810-629-1097

71-74 B-E Body (Both sides) Black Sun Visors. Photo 1-2 Used, Set of Two $80 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
71-74 B-E Body Black Sun Visors. Photo 3-4 Used, One for $40 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

70, 72-74 E Body Cuda Headlight Buckets With Trim Ring. Used, $50 A Pair + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

I have for sale a used right side, E-body, SB engine mount bracket. It’ll fit any of the SB engines. This bracket is straight, clean and painted. It comes with the 3 OEM attaching bolts, nuts but only 2 of the flat washers. I would like to get $8.00 for everything plus the shipping.

Edison, NJ
rider1454 at aol.com

Taking my E body apart, Pulling the torsion bars found out that I have two right torsion bars numbers on the end 780
Would someone be willing to trade left 781 for a right one,or sell a left one.
Willing to sell one for $130.00
818.425.3967 or Tooldude6464 @ sbcglobal.net

Restored AVS carburetor for 1970 340 auto cars. Date Code L9. Linkages, screws, solenoid housing and bracket disassembled and zinc plated. Solenoid tested and works.

$750.00 + shipping for zip code 18929

cudaize@comcast.net

Sold as cores, all are free moving, dirty originals. Carter 4934 s with ID Tag, $400, 4749 Holley, $100, Carter 4615 sa with ID Tag, $400, TQ 6318s, $400. plus the ride. lafrancebiglou@aol.com

NOS challenger front spoiler 3443354, with pentastar and part number. Has minor shelf wear (see close up photos)
$300 + $20 for shipping

paypal accepted
email: aurum at axion dot net

NOS E-body speaker grille fits all except 70 challenger.
Has pentastar and part number, never been installed (see close up photo of screw holes)
$300 + $20 for shipping

paypal accepted
email: aurum at axion dot net

70-71 cuda trunk lock cover, original with mounting screws
$100 + $30 shipping

paypal accepted
email: aurum at axion dot net

E-body 8 3/4
4.30 gears in 489 case in good shape
Disassembled from Axle housing, but housing, axles and 11” backing plates all available. No drums
Will sell as a complete set, or pieces.
Pictures available on request.
Housing is from a 1970 Challenger
Thanks for the ad
Center section with gears- $500
Axle housing-$150
11” backing plates- $150

With pre-arrangements I can bring to Indy Swap meet on March 1.

70-71 0nly 3sp complete windshield wiper linkage has all the bolts and clips
300 OBO plus shipping somerbr1@aol.com

Still have one left

'70 CUDA GRAN COUPE SHAKER HOOD WITH FACTORY TRIM RING. From 440-Six Barrel car; original factory paint Banana Yellow. Flawless 100% perfect overall condition. $7900.00 located NW Chicago area. Selling for a good friend. PM for info.

Complete electric washer fluid bottle and electric pump correct for late 1970 E-body and 1971 E/B-body. This is a new licensed reproduction bottle (purchased from Megaparts) with a NORS electric pump with the rare side discharge outlet. There are no part numbers or date codes on the washer pump. Tested and ready to install. $200 plus shipping.

SOLD

Thanks for the ad!

I have a complete original ( NOS ) owners manual for
1970 Plymouth Cuda / Barracuda with all extra papers.

All in good shape and all papers unwritten.

$590 including shipping with tracking. Paypal only.

Pm or email to: Nicklas-780@hotmail.com

Thanks
Nicklas

1972 to 74 cuda challenger electronic ignition box bracket original chrysler part. has been freshly powder coated ready to install. $40.00 plus shipping. text me if interested first then i call you back.. please no pms. rich at 815 520 3227 rts restoration parts open till 9pm arizona time. ask if unsure. have sold alot of parts on the site and thankful to moparts !!!!!

Original 1970 Challenger gauge assembly, everything is original, very clean excellent condition, $200

One year only, 1970 Challenger only.

Email Kenei@comcast.net

original used ebody convertible latches. still are smooth moving for the guy who has a driver or will not settle for aftermarket china stuff. priced to sell .150.00 plus shipping. i hope someone can use them or i put them in display case. rts restoration parts 815 520 3227 (text me first if interested in parts then i call you back. we all get calls from strange numbers and sorry i do not answer them all. and please no pms. i dont live on this site tooo busy restoring old mopars. funds help customer buy more parts from you guys.!!!!

Up for sale is a 70 dual snorkel air cleaner. Better than average condition for an original unrestored air cleaner. Includes two lids. Both will need very minor dings repaired. If you're willing to spend time repairing the very minor imperfections you'll end up with a nice air cleaner. Also can be used just as is. I repaired the underside of the one snorkel where the heat riser tube is connected to. Visible in one of the pictures. Turned out nice. $200 plus shipping (oversized). I have additional pictures if needed.

PM if interested

factory original powder coated really nice front license plate bracket #2856666 for a 70 to 74 cuda. 815 520 3227 text me first then i call you back please no pms. i do not answer calls. $40.00 plus shipping we use paypal or postal money orders no credit cards. ask if unsure. or can be used on a 68 or 69 charger some say also 70.




PRICE LOWERED. NOW 40.00$

a/c dryer holder. $35.00 plus shipping hard to find part. text us at 815 520 3227 then we call you back. no pms. ask if unsure.

Edit: SOLD
Three used but in great condition 1970 style Barracuda emblems for sale, asking $25 each plus shipping.

Message me through here or email at richdetert@sbcglobal.net
My cell is 314-704-6363 call or text is fine.

I'll be at the Indy Swap Meet (buying) if anyone is interested in them I can bring them along.
Just let me know before we leave for going on Thursday.

I have these two 1970 E Body, Cuda & Challenger shifter knobs up for sale.

$30.00 each, plus a few bucks for the mailman, to your zip code.

Payment, i accept Pay Pal.

Thank's for looking.
Jim V.
hemi71x

Top of door and rear quarter belt moldings for 1970-71 Barracuda.

All in very nice condition. Some minor imperfections. No dents. The rear moldings are the style WITH the factory screw hole for mounting.

Sold as the set of 3 (no drivers side)
> Pass Side Door
> Both Rear moldings

$100.00 PLUS Shipping

USED pistol grip lens & grip screws $6

USED - clutch safety switch wire from relays to firewall - $6

Dodge 6 ft scat pack banner - $25 ***SOLD***

NEW - 70-71 34-440 Carter AVS solenoid bracket - $30

NEW - LARGE chrome master cylinder cover with bail wire - says "WARNING - clean filler cap before removing, use only DOT3 fluid from a sealed container" - $25

USED - misc. seat belt bolts x 12 - $20

NEW - Hex head header bolts x 9 - $10


Located in NW - Indiana
Prices don't include the ride

PM here on the board -

1970 & 1971 340 round unsilenced air cleaner, nice used condition $550.00 (708) 288-2879

1970 & 1971 426 HEMI intake manifold, NOS, never been bolted to an engine $1200.00 (708) 288-2879

From a 72 or 73, I can't remember. 3-speed wiper switch, panel dimmer and headlight switch. With knobs. $100 shipped in U.S. No Paypal. U.S. money order only. I also have some lose switches, inquire. VEIGHTPETE@GMAIL.COM

***ALL SOLD***


Slightly used - Power Master #3257 starter - used only to get the car running after engine rebuild then found date coded starter - NEW $248, will sell for $100

NEW - Tuff Stuff alternator 130 AMP - I had painted the pulley to match OEM, then found correct date coded alt. - with receipt - paid $221 - will sell for $150

NEW REBUILT - Saginaw PS pump with bracket - had it rebuilt, mounted (never ran) then found I needed a Federal pump. Rebuilt by PS.com - $250 have receipt

Have more photos if needed - can only post 4 here

Prices do not include the ride -
located in NW Indiana

PM here on the board

One Pr. original 1971 Dodge Challenger R/T rear quarter panel scoops, excellent used condition, no damage no broken studs $600.00 for the pair (708) 288-2879

1970 340 4 speed carburetor

Good condition, rebuild or restore. Secondary throttle shaft is tight.

$400 obo

Thanks

Original pair of 70 cuda headlight bezels. Good condition

$350

Thanks

I have a very limited supply of NOS OE correct and OE appearing windshield washer pumps. These pumps are correct for variety of applications, including 67-71 B-body and 70-71 E-body. I have several options available with regard to the angle of pump discharge and ground wire configuration. Some of these are NOS out of the box and others are assembled from NOS components sourced from assorted applications. All are tested and guaranteed to work as designed.

I can restore original ground wires or add new ground wires depending on buyer’s preference. I also have tooling to secure the ground wire eyelet to the washer bottle.

Pricing varies between $150-$250 depending on type of pump (Delman or McCord), part number, date code, ground wire, etc. Please contact me if interested and I will provide further details.

Thanks for the ad!

Link to a very detailed thread discussing correct 70-71 E-body washer fluid pumps: https://board.moparts.org/ubbthreads/ubbthreads.php/topics/265356/1.html

SOLD!!

1970 Plymouth Cuda Clutch pedal assembly.

Not 100% complete.
What you see is what I have.
From a 70 Cuda that I parted 40+ years ago after I sold it to a buddy and he totaled it.
I kept hanging on to it hoping that I'd use it one day.

Asking $250.

Message me here or email me at richdetert@sbcglobal.net
Cell is 314-704-6363 call or text.

-NOS 1970-74 E-Body Muffler Set
-Both are dated 6-73
-Still have the paper labels where the tips mount.
-Overall good condition for 51 years old
-Have many more pics of these mufflers, I can text more pics to you.

$5000 OBO

Mike
Call/Text 516-250-2366
FREE SHIPPING IN THE USA

-NOS 1970-74 E-Body Resonator Set
-Both are dated 334-9 (334th day of 1969)
-The NOS headpipes are welded to these and were meant for a 1970 Challenger Convert 340?
-Part # written on one of the resonators is 3466 279
-This date code was never made by ECS so the judges will know these are real.
-I have many more photos and can text them to you.

$3500 OBO

Mike
Call/Text 516-250-2366
Free shipping in USA (only if headpipes are cut off prior to shipping) If you want them on the resonators, buyer will incur shipping due to it being oversize

-NOS 3514 330 Electronic Distributor Vacuum Advance
-I believe this part was standard for 1970 Mopars equipped with 440/4 barrel carbs from the factory.
-Comes with original box

$400 OBO

Call/Text Mike 516-250-2366

Free shipping in the USA

-NOS Mopar Green Oil Filter for the MOST Insane Restored Trailer Queens or Kings (no judgement) LOl...
-Part #1851 658
-This is what came on your big block Mopar from the muscle era.
-Comes with original box
-Have more photos if you require them.

$1200 OBO

Mike
Call/Text 516-250-2366
As always FREE shipping in the USA

-NOS 3528 833 E-Body Trunk Plates
-More correct for late build 70 or 71 Cuda/Challenger
-Have the perfect compliment to your exhaust system hiding under your $5000 NOS trunk mat (Lol..)
-More pics available

$1500 OBO

Mike
Call/Text 516-250-2366
Free Shipping in the USA

-NOS 1970 E-Body Brake Rotor/Hub Assembly
-Hub has a 1972 date code
-The castings on the rotor and hub say it was made in Canada. I cannot make out the manufacturer casting. There are no pentastars anywhere on this. There are races pressed in on each side of the hub and the race is stamped BOWER. Maybe this whole assembly was made by them. I have no idea.

$900 OBO

Mike
Call/Text 516-250-2366
FREE Shipping in the USA

-NOS? Inner Tie Rod Set
-Part #3420 155 (Casting 2835885)
-I dont have original boxes for this set and they were loose when I got them.
-No zerk fittings
-NOS Boot are included as shown
-I have more pics if needed.

$800 OBO

Mike
Call/Text 516-250-2366

From a true 37K mile Challenger. Missing clock block off plate. Super nice gauge faces and needles. $75 plus shipping. No Paypal. U.S. money order only. VEIGHTPETE@GMAIL.COM

Very nice condition, could use a repaint. No cut or broken wires. $40 plus shipping. No Paypal. U.S. money order only. VEIGHTPETE@GMAIL.COM

70-71 Restored brake distribution blocks. Primary has KH 281 0 date code. Secondary date code is 020 0 . Restored by Brake & Equipment Warehouse

250 OBO
PM me here

9 five one 675 nine five five one

1970 426 HEMI 4-speed distributor OEM concourse restored
No excuses, ready to run. Fully rebuilt & restored. Tuned and setup by Joe's distributor.
New points
New condenser
New wire lead
New cap & rotor
Rebuilt vacuum advance

Ready to run, set initial timing to 18' perfect OEM concourse ready
$1650.00

SOLD SOLD SOLD

One Pr. 1970 & 1971 426 HEMI valve covers, original not reproduction, they have been stripped to bare metal and the restoration has begun, as you can see in the pictures it needs to be finished, selling as is $1500.00 (708) 288-2879

1970 & 1971 340 4 BBL. round unsilenced air cleaner $600.00 (708) 288-2879

Nos Horn / Key Buzzer relay # 3579204
E-body and 71 up B - body

SOLD

E-body Stereo wiring and components:

E-body 5 speaker stereo wiring, some cuts of connectors including the rear speaker connector, Nice otherwise, - $85
E-body 3 speaker stereo wiring, no cuts, all connectors present, Nice - $110
E-body stereo crossover, untested but look good, $25

Message me if interested, Thanks!

1971 Challenger R/T stripe pieces. NOS R/T emblem for hood and one white quarter panel side with original Chrysler parts box dated 1973! Most likely not usable but cool for basement art or whatever. $30

Thanks

1973-1974 Challenger bumper fillers, some rust behind the rear pieces but rubber looks good, $100

Thanks

Casting number 2780998 interchanges with 2951995 P3690743 and 2463661. Fits Mopar Small Block 318-340-360. 90 degree oil filter adapter mount. excellent condition...........$125

Thank you

716-997-0070

bakurruda@aol.com

Assorted 70-74 e-body winshield molding all need work of some sort........$125/all

Thank you

bakurruda@aol.com

716-997-0070

1970-71 Cuda / Barracuda dash corner panel with switches in nice condition............none of the switches have been tested .....$325

Thanks

716-997-0070

bakurruda@aol.com

This is a pair (1 left, 1 right) of factory original 1970-74 Cuda door top molding. Straight pieces that need restoring, lite scratches, and some minor dings, being sold as cores to restore.....$125/pr

thanks

716-997-0070

bakurruda@aol.com

NOS E and B body engine bracket left side 318 mopar part 2806025. I think it fits 70-72 E and B body but not positive so do your research first. $45 plus shipping $9.00 Sorry............. SOLD !!!!!!!!!!

SOLD

I have this nice clean pit free 1970 slide in shifter mechanism for E-bodies.
Everything works as it should, nice smooth operation, no need to send out , can bolt right in and use.
7180 on arm indicating correct application....70, early 71 E-body.
Hard to find, one year, one application use, later 71 -4 used bolt in style mechanism.
**SOLD** USPS Priority shipping included... to the lower 48 from 13622 NY
pm, email or call 613-382-3550
Thanks for the ad
Terry

This stainless is NOS in its original Chrysler sleeve packaging part number 3419800.
It is the left ( drivers ) side top quarter molding for 1970 and 71 Challenger convertible
In flawless condition, no marks, scuffs, scratches, dents, or imperfections...just removed from the sleeve for photos.
Doesn't get much better for that top restoration or for your driver.
Hard to find good even in used condition, I'm selling this for $325.00 shipping included USPS to the lower 48 from 13622 NY
pm, email, or call 613-382-3550
Thanks for the ad
Terry

I recently came across these that I had misplaced many years ago.
I purchased these grips, part number 2996466-7 and the 3 screws part number 9431606 as receipt shows in 1984.
Shortly after that they became NS-1
I have lots of photos along side of reproductions showing subtle and not so subtle differences, can only post 4 pictures here.
Last 2 pics are NOS originals on left beside current offered reproduction handle and its shiny grips with stainless screws,... not chromed like original ones.
Repro only looks bigger because was closer for photo, they are exact same contour, just the different finish is obvious.
There are many reproduction variables out there,... some very good, some not, but none as exact as original.
If you'd like to upgrade your handle with correct NOS North American made for Chrysler parts, these may fit the bill.
***SOLD*** USPS Priority shipping included to the lower 48 from 13622 NY
pm, email. or call 613-382-3550
Thanks for the ad
Terry

Original 1970 1971 Challenger Cuda 440 440+6 Hemi leaf springs, matched pair, $1495

Email Kenei@comcast.net

Excellent condition. $200 plus shipping. No Paypal. U.S. money order only. VEIGHTPETE@GMAIL.COM

-Chrysler Part. # 2852 175
-NOS 7290 U-Joint Set
-U-Joints still sealed in there factory bags.
-These would be perfect for an over the top restoration. The 1%ers need this.
-Not sure if boxes pictured are the originals with a superceded part#.
-if you need more pictures, please let me know

$600 OBO

Mike
Call/Text 516-250-2366
Free Shipping in the USA

-NOS E-Body muffler heat shield set
-Chrysler Part# 3404 595/6
-The muffler shield you see that is in dark gray primer has mint galvanized spangle finish underneath the primer. I gently scraped some of the primer off to reveal this insane finish.
-The muffler shield you see with a mix of silver and red oxide primer does not have the galvanized spangle finish on. It looks to me more regular galvanizing.
-For that over the top restoration. The 1%ers need this!!!!!
-Please let me know if you need more pictures of these items.

$1400 OBO

Mike
Call or text 516-250-2366
Free shipping in the USA

-NOS 10“ x 2 1/2“ brake shoe set.
-Chrysler part number 3528 333
-need some cleaning but should clean up nice.
-detail your Dana 60 rear with the correct brake shoes.( for that part the judges will never see. lol)
$350 OBO

Mike
Call or text 516-250-2366
Free shipping in the USA

-bag of nice condition wire that came from harnesses I pulled apart over the years. this wire can be reused and is not dried out.
-perfect for someone looking to fix or restore their original wire harness with the correct wire.
-keep in mind that M&H harnesses don’t come close with their color matching and stick out even on the more well restored vehicles. (Not a dig at MH, there quality is good but wire color match not so good, LOL)
-Why the heck would you want something that’s only 85% correct when you can fix or restore your original harness with the real wire that came on our mopars back in the day.

$125 OBO

Mike
Call or text 516-250-2366
Free shipping in the USA

V I N rivets $25.00 a pair delivered anywhere in the states
Julius
Julius@rbyj.com

-NOS E-Body Upper Ball Joint Set
-Chrysler Part # 2298 534
-Factory installed break off zerk grease fittings.
-One ball joint and the associated hardware is shown. the box with the other NOS ball joint is sealed.
-These would be perfect for an over the top restoration. The 1%ers need this!!
-If you need any more pictures, please let me know.

$1300 OBO

Mike
Call or text 516-250-2366
And as always free shipping in the USA.

Complete Slap-Stick shifter assembly with all brackets still attached to floor section removed from a 1970 Challenger.
This is the same as a 1970 Cuda' and Barracuda and also the same as all E - Bodies thru '74 although they would use a T handle.
I believe this is the same as the B bodies, 1971 thru 74 although they too would also use the T handle.
All brackets still welded to the factory locations so you know where to weld on your floor.
Also, the lower seat bolt attach point floor stiffeners still factory welded to the underside.
$300
Located in Sheboygan, WI
Ph: 920-889-2886
Em: hatrick5hole@aol.com
Best to email as I don't see PM as often.

1970 grand coupe front door panels and i do have the back pieces not on the panels . 2 are bad the other 2 i think are usuable .$300 plus shipping. shipping in the box it would be about 130$ to about michigan 15 pounds weight. panels are for a driver i just do not want to remove moldings myself. please ask if unsure 815 520 3227 till 9 pm arizona time paypal is fastest. postal money orders take time to process. TEXT ME FIRST IF INTERESTED THEN I CAN YOU BACK. please no pms. i dont live on here.

-NOS 3420 155 Inner Tie Rod Set.
-These fit E-Bodies and could possibly fit other models as well. (Consult the parts book to be sure).
-I don’t have the boxes
-Zerk fitting missing and NOS boots added. These tie rods came loose in a parts collection I bought out years ago.
-Free Shipping in the USA.

$800 OBO

Mike
Call/Text 516-250-2366

Mopar NOS? flex fan blade 3462150 Looks unused can`t verify for sure. About 18 to 18 1/2 kinda hard to measure exactly. Some research shows it possibly fits

1971 318 with a 2.71 or 2.76 rear gear, many cars except A-body;

1972 same 318, PLUS some 400, 440, used on most cars except A body It looks like it is date-coded G72 - July 1972.

$40 plus shipping

NOS kit purchased in the 80's from dealer as seen on last picture with receipt.
These are the factory installed ones, correct numbered NOS bushings 1400269 and nuts.
For Cuda Challenger rear springs, 8 3/4 or dana.
Another set sold in Nov last year on here for $750.00 as seen in the Moparts ad
***SOLD** USPS Priority shipping included from 13622 NY
Thanks for the ad
Terry

A set of four Dodge Challenger wheelcovers. One has a couple minor dings as show in the pics. Included is an extra 5th one with no dings, but a damaged center, if you want to try to swap centers. All five wheelcovers included in this sale. Not NOS, but a nice set.

$400 / set of 5, plus shipping. I'm never offended by offers. More pics available upon request. TWSchuler@aol.com

Used 1971 Challenger locking gas cap with key, in excellent condition.

$400, plus shipping. I'm never offended by offers. TWSchuler@aol.com

Complete set 1971-74 Dodge Challenger body side mouldings, in black. Two of the pieces are NOS. One area on one moulding has a depression on the rubber portion. A spare moulding with good rubber is included. More pics available upon request. Set is in excellent condition.

$750 / set, plus shipping. I'm never offended by offers. TWSchuler@aol.com

A pair of NOS Challenger SE emblems.

$400, plus shipping. I'm never offended by offers. TWSchuler@aol.com

An original T/A- AAR air cleaner assembly, with correct original wide lip (A12) lid and original filter element. Crusty all around; but workable. Note the denting and waves in the lid; again workable with some masaging. Please look at the pics closely for condition; more pics available if needed.

$1,300, plus shipping. I'm never offended by offers. More pics available upon request. TWSchuler@aol.com

3 NOS 1969 to 1972 single gang power window switches for "B" & "E" body cars, never been installed on a car $375.0 for the three of them (708) 288-2879

1971 Plymouth Cuda & Barracuda hood latch lever & bracket, very hard to find one year only part $375.00 (708) 288-2879

Nice Used 71 - 74 Radio knobs $20 shipped US

1972-74 Cuda trunk lock cover.

$60, plus shipping. I'm never offended by offers. TWSchuler@aol.com

1972-74 Cuda trunk lock rod.

$30, plus shipping. I'm never offended by offers. TWSchuler@aol.com

1972-74 rally dash woodgrain trim, made with actual wood veneer. Never seen something like this before? Comes with installation instructions.

$200, plus shipping. I'm never offended by offers. TWSchuler@aol.com

Reproduction E-Body Cuda Challenger steering column crush can, new in OER box. Lists for $140.

$100, plus shipping. I'm never offended by offers. TWSchuler@aol.com

Original Cuda rear quarter panel section, as shown.

$30, plus shipping. I'm never offended by offers. TWSchuler@aol.com

A set of original 1970 Cuda front valance inserts sections. All tabs and mounting features intact. Easily make one nice original piece from the three sections offered. Part number 2949524.

$120, plus shipping. I'm never offended by offers. TWSchuler@aol.com

A new reproduction Hemi/440-6/340-6 orange oval air filter element, with round holes. List price $125.

$100, plus shipping. I'm never offended by offers. TWSchuler@aol.com

A new reproduction trunk seal, fits multiple models of 1964-72 Mopar. OER part number MD2096. List for $20.

$15, plus shipping. TWSchuler@aol.com

An original drum brake master cylinder cover and bracket, in nice condition.

$120, plus shipping. I'm never offended by offers. TWSchuler@aol.com