E Body - Parts For Sale - 1st Quarter

Posted by: moparts

E Body - Parts For Sale - 1st Quarter - 12/31/17 01:57 PM

up
Posted by: JRepucci

Re: E Body - Parts For Sale - 1st Quarter - 12/31/17 02:22 PM

Master cylinder mounting studs... typically fits all manual drum brake cars $25 for a set of 4
Posted by: moparmarks

Re: E Body - Bucket Seat Backs - 12/31/17 02:26 PM

Black one. Fits 71-4 B, 71-2 A/E Pass side
Real good driver condition with some minor scuffs except for inside hing cover which had some deep scratches.
80.00
Green one. Fit 70-early 71 A,B and E. Either side.
Good driver condition with some deeper scratches, mainly down low.
50.00
Plus shipping.
Take check, MO or PP.
Free delivery to the MATS or S/Fling with prepaid.
Posted by: moparmarks

Re: E Body -A pillar covers - 12/31/17 02:28 PM

Decent set of used original A pillar covers for 71-4 E body hardtop.
Both have a broken end that is covered by the metal trim. These are the 1970-early 71 ones. Good drivers condition.
60.00
Plus shipping.
Take check, MO or PayPal.
Posted by: convertcuda

Cuda Parts - 12/31/17 02:31 PM

Ken 715-432-5080 or Convertcuda@gmail.com

NOS Cuda H-PIPE 1000.00
Mint 70 Cuda Rally Hood - Super clean - no rust 1000.00 OBO
E-body Convertible parts from 5.00 to 2500.00 depending on your needs
Convertible kits in stock - From 5000. to 25,000 depending on how much you need
Rust free and dry - Challenger Doors 1000.00 each
Assembly line 70 440-6 pack engine harness 500.00
Assembly line correct 70 headlight harness 500.00
Nos Assembly Line Dana 60 - hemi or 440 manuals drive shaft 2500.00 or best offer


Open to trades
Posted by: moparmarks

Re: E Body - Cude interior panels - 12/31/17 02:31 PM

Original Cuda black interior rear side panels for hardtop. Good drivers condition with no major damage or sun rot. They do have some scuffs and scratches especially on the front edge.
175.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body - 71 Seat Belts - 12/31/17 02:32 PM

Here is a set of 1971 seat belts. Good drivers condition. Have been cleaned. Couple of the rear metal parts has some pitting. Fronts are nice. Some of the tags are missing but no other damage. This set fits
convertible but may not be "correct".
250.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.

SOLD

Posted by: moparmarks

Re: E Body - Convertible parts - 12/31/17 02:34 PM

Door wedge guilds. Real nice. 150.00pr SOLD
Top post brackets. 100.00pr
Mirror base. 50.00 SOLD
Un-used reproduction top with plastic window. Brand unknown. 125.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body - Parts For Sale - 1st Quarter - 12/31/17 02:37 PM

Original black 71-4 dash pad for a/c and 3-speaker dash. Good drivers condition. Has a good crack next to the emblem and a couple very minor scuffs on top drivers side. No other damage.
250.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.

SOLD

Posted by: moparmarks

Re: E Body - Convertible parts - 12/31/17 02:38 PM

New top pump. Sold
Good used pump. 75.00 SOLD
Under dash switch harness. Have two. 75.00ea SOLD
Manual top stands. On one the plastic has a piece broken off. 200.00
New reproduction switch. 150.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid
Posted by: moparmarks

Re: E Body - Parts For Sale - 1st Quarter - 12/31/17 02:40 PM

Black rear seat cover for 70 Cuda convertible. Came in a 71 project that I finished and put the correct 71 cover in. This one is in new condition other than it has been installed. Don't know the brand.
175.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body -Quarter glass regulators - 12/31/17 02:43 PM

Quarter glass regulators. Very good drivers condition. No damage or missing teeth.
70 Cuda real nice 250.00
71-4 Challenger 175.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body - Cuda Fender gills - 12/31/17 02:45 PM

New reproduction 71 Cuda fender gills. One has a broken stud otherwise no damage. Includes mounting plates.
275.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body - 73 Wiper Motor - 12/31/17 02:46 PM

Nice 3-speed wiper for 73 E-body. Good drivers condition.
125.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid
Posted by: moparmarks

Re: E Body -74 Wiper motor - 12/31/17 02:49 PM

Nice 3-speed wiper for 74 E-body. Very good drivers condition.
150.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body - Cuda V/top Molding - 12/31/17 02:50 PM

Cuda vinyl top moldings. Fits 70-74
New reproductions 150.00
Nice used. No damage but needs a buffing. 100.00 SOLD
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body - Steering Wheel - 12/31/17 02:51 PM

Standard wood grain steering wheel. Good drivers condition. Has impressions from a cover lacing. Only in a couple spots otherwise is a pretty nice wheel.
150.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body - Parts For Sale - 1st Quarter - 12/31/17 02:55 PM

Right side a/c duct 75.00
70 fuel vapor line 45.00 SOLD
71 fuel vapor tank. 80.00
Under dash a/c harness 30.00 Sold
Fuel fill tube boot 15.00 new repro SOLD
70 washer bottle manual pump 40.00 new repro
71 Cuda right tail light bezels.
new repro, white one, 75.00
Real nice original 65.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body -Rallye dash wood Grain - 12/31/17 02:56 PM

New reproduction Rallye dash woodgrain. 72-4. 125.00
70-1 woodgrain sticker only 25.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body - 70 Challenger grill - 12/31/17 02:59 PM

Pretty decent grill for 1970 Challenger. No major damage. Some minor scratches and scuffs. Very good drivers condition.
400.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body -Shaker Parts - 12/31/17 03:02 PM

New reproductions from Ben Snobar.
Cold air door 225.00
Cable set.100.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.

Posted by: rtsinc

Re: E Body - Parts For Sale - 1st Quarter - 12/31/17 06:25 PM

HURRY BEFORE THEY ARE ALL GONE!!! (NEW TECHNOLOGY DASH RE-FACIT) GUAGE OVERLAY KITS. FOR 70 -74 CUDA AND CHALLENGER STANDARD DASH. BLACK OR WHITE FACE. CHANGES COLOR FROM BLUE TO GREEN AND BACK FULLY DIMMABLE. REPLACE THAT HORRIBLE HARD TO SEE FACTORY LIGHTING TO A AWESOME DISPLAY. $55.00 PLUS SHIPPING. RTS RESTORATIONS 815 520 3227. CALL FOR MORE PICTURES OF INSTALLATION AND FINISHED DASHES. I ALSO WILL INSTALL FOR YOU IF DESIRED. CALL FOR A QUOTE.
Posted by: 6PAX

Re: E Body - Parts For Sale - 1st Quarter - 12/31/17 07:13 PM

72-74 E-body bucket seat tracks. Nice shape. $250

NOS Challenger T/A front chin spoilers. Still have dealer stickers on them. Minor shelf wear. $250

1970-71 Challenger deck lid with wing cutouts. Does not have T/A spoiler cutouts. Very nice shape. $400 Pick-up only.

70-74 E-body brake pedal switch and bracket. $20

Two sets of new E-body side-view mirror mounting screws for 70-74 E-bodies/71-72 B-bodies. $15 a set.

E-body disk brake assemblies with rotors, calipers, spindles. dust shields, etc. Not sure of year but I think 72 or 73. $300

1970 Challenger driver side taillight lens. $75

1971 Challenger painted gas cap. $35

1970 E-body dash woodgrain decals. $40

70 Challenger dash speaker grill #2984783. $50

Shaker hood six pack air cleaner base plate support brackets. New. $75

1971 Challenger passenger side rear quarter end cap molding. $35

Challenger taillight harness. $50

E-body glove box lamp and lens. $30

One pair of E-body wire harness retaining brackets that go on the sides under the rear seat. $30

71 B/E-body ignition light harness complete with delay harness. $80

E-body heater box vent cable. $20

Woodgrain standard dash gauge panel and switch panel from a Barracuda Gran Coupe convertible. Has headlight, dimmer and wiper switches and the fourth hole labeled top-lift. $200

71-74 E-body driver's side dash bezel. $50

Original E-body bumper jack anti-rattle felt. $15

New 440 Six Pack shaker emblems 3462491 3462492. $150

NOS horn relay/ignition buzzer 3513206. $50

72-74 E-body steering wheel. The grip and spokes are in real nice shape $125

Nice original E-body black passenger side kick panel. $40

Challenger passenger side and driver's side front parking lens. $25 each

New reproduction black E-body kick panels. $75

1971 E-body radiator #3443972. $100

Pair of chrome E-body door lock levers. $20

2 Pair of new E-body horn brackets, 1 long style, 1 short style. $20 pair

Challenger driver side front side marker assembly. Lens cracked and plug is missing but bezel has good chrome. $25

New MAS Racing Cuda chin spoilers. $40

1971 Dodge body and chassis service manuals. Originals not reprints. Nice shape. $75

New 1970 Challenger illustrated facts and features manual. $10

Chilton's 1965-72 Barracuda/Challenger repair and tune-up guide. As-new condition. $50

1970 Challenger R/T Dream Machines trading card #29. $3

Prices do not include shipping. gt340 at yahoo.com
Posted by: Goat330

Re: E Body - Parts For Sale - 1st Quarter - 12/31/17 08:02 PM

Audiovox cruise control CCS-100, NIB $100+S&H, Bill at wmemore@aol.com or PM. Thanks for free ads Moparts!
Posted by: 72ls5fla

FS: 1970 14"x5.5 Rallye Wheels,GoodYr Tires,OEM Trim Rings - 01/01/18 10:44 AM

hello -


I have a set of PT# correct 14"x5.5 rallye wheels.
The rims were restored with correct silver paint (from Rodger Gibson), and black backing
The set has VG condition, factory/OEM original trim rings
The tires are PolyGlass RWL F70-14 GoodYear reproduction tires (from Rusty)

ALL four rims have same part# 3580058
M1 7 16 date codes around valve stem.

**
these are 1971 dated rims made for very early 1972 production - 99% sure. E-Body.
**

$1,200.00 for all four tires/rims etc...
Plus buyer pays shipping costs.

Questions, please call: 850-567-2994 (cell)
or email at: bill.chamberlain@onetechplace.com

Thanks -
Bill
Posted by: gdmusclecar

NOS 71-74 CUDA TRUNK PAN - 01/01/18 11:41 AM

NOS 71-74 CUDA TRUNK PAN $899


***WE CAN SHIP***

E-MAIL:GDMUSCLECARPARTS@YAHOO.COM

SHOP # 904-272-1803

ORANGE PARK,FL.
Posted by: rayztoy

VARIOUS MOPAR PARTS - 01/01/18 12:54 PM

VARIOUS PARTS
2 OEM 3 Nipple breather $50.00 each
Repro Brake Booster Wiring Clip 1971-74 A & B-Body 1970-74 E-Body with nuts $25.00
ECS Engine Starting Instruction Card hangs on turnsignal 1970-1971 All Vehicles SOLD
DMT Manual Console Woodgrain overlay for 1970 E Bodies, 1970 ONLY Barracuda, Challenger (1971-74 models used the darker American Walnut color). This is made from 3M DiNoc. $25.00
Repro Owners Manual 1970 Barracuda $5.00
ECS Vacuum Advance Decal Green 4675 all SOLD
Gearbox Date Tag (10th day of 1970) $15.00
Transport Tie Down Bracket $20.00
Fuel Line Ground Strap $5.00
4 Speed Pedal Rod $20.00
Aluminum Heater Hose Strap, 3 available $5.00 each
Fine Lines Metal Rear Axle Brake Line 1972-76 A-Body, 1971-74 B-Body, 1970-74 E-Body $15.00
Repro Shaker drain hose w clamps SOLD
Cuda Challenger Shaker Support Feet: New reproduction shaker base plate to valve covers support feet. Semi-gloss black painted metal with black rubber coating on section that contacts the valve covers, includes the 2 bolts. $60.00
ECS Sunvisor Sleeve 1970-1971 All Vehicles SOLD
New Fuel Pump AFP 4845 NAPA Big Block High Performance w/ 3/8 SOLD
Aftermarket Sway bar brackets, poly bushing and mtg hardware $15.00
1970 Cuda rear bumper, good for driver or core $25.00 local pickup only
Mopar Super Stock Battery, can be used for shell for a replaceable small modern battery hidden inside, reduced to $35.00

Pics upon request, contact via PM or email zabinsky4@msn.com, Money Orders ONLY, buyer pays shipping
Thanks for the ad MOPARTS!
Posted by: dart4forte

Re: E Body - Parts For Sale - 1st Quarter - 01/01/18 01:52 PM

Restored 1970-1974 E Body seat belt set, new webbing, all hardware restored all necessary hardware to completely install your seat belts. Date tags and NOS webbing is available at an additional charge.

$350 for a basic set. A basic set consists of belts for bucket seats or bench, shoulder belts rear bench. A third lap belt set or shoulder belts for the rear bench is available for an extra charge. Hardware such as bolts, mounting plates, date tags etc. are extra. A basic set will have some flaws in the hardware. No core charge is required.

$550 for a show quality set. 71 Belts are $650. These sets include everything needed to install in your car. It will include all necessary belts, hardware and date tags. A $150 core charge is required. $250 core charge for 71 belts. If you have a core set it must be complete, be of the same model year and totally free of pits in the chrome and corrosion. Cores must include bolts.


Mesa AZ


Coming Soon

Seat belt storage clip metal brackets. Found standard on the deluxe seat belt sets. These brackets are usually missing and hard to find.
Posted by: 71yelladustr

Re: E Body - Parts For Sale - 1st Quarter - 01/01/18 02:17 PM

Complete E body pistol grip shifter assembly w/ rods. Shifts great. Early push-in style handle. It’s in good shape and has recently had the grips replaced. Includes nice non-console repro boot and bezel. $400+ shipping. PayPal accepted. Pm or text for pics. (573)433-0192. Thanks. ***Sold***
Posted by: b5cuda69

Re: E Body - Parts For Sale - 1st Quarter - 01/01/18 06:28 PM

'70 Cuda tail lamp assemblies, $150 for all (one drivers side, two p/s)
'70/71 Road lamps, two sets - SOLD
'70-71 Blue sun visors, all stitching intact, no tears or holes, some indentations. $40 for the pair.
Rearview mirrors, a complete unit and a spare mirror/housing, $35.
Happy to provide pic's on request. Prices do not include shipping from Kansas. Open to trades - need A/C dash vents, '70 header panel. Thanks!
Posted by: b5cuda69

Re: E Body - Parts For Sale - 1st Quarter - 01/01/18 06:29 PM

Brand new '70 grill, unpainted, with chrome strips. Just bought a month ago from Roseville, then last week I stumbled into a stash of e-body parts including (of course) a very nice OEM '70 grill. Asking $375 plus shipping from Kansas, thanks!
Posted by: DUSTER900

Re:70 STEERING WHEEL ASSY - 01/01/18 07:21 PM

I HAVE A REAL NICE COND
70 E-BODY 2 SPOKE STEERING WHEEL
DONT SEE THESE AROUND TOO OFTEN
$125.00 OBO
MAIL ME FOR PICS
586-596-5363 SHAKEDOWN@WOWWAY.COM
Posted by: DPS_1

1971 HEMI Carbs for Sale - 01/01/18 10:17 PM

I have a matched pair of HEMI AUTO Carburetors for a 1971 Cuda, Challenger, Charger, GTX or other B-Body MOPAR [P/N 4970S Dated Week 39 of 1970 and 4971S Dated Week 40 of 1970]. The carburetors have been meticulously restored by Brian Brady. Each carburetor has a Carter Specification sheet included. These carburetors are rare and hard to find in this state. I am offering these carburetors for $7500.00 OBO plus shipping and insurance. Please contact me if you have questions via email at dpsuozzi@gmail.com

I have more pictures of these HEMI carburetors, plus the specification sheets available for viewing.
Posted by: Pale_Roader

70 Challenger tail lights - 01/02/18 07:27 AM


70 Challenger tail light lenses and bezels. Nice driver quality, not perfect.

$150Cdn ($120 US).

PM me here.
Posted by: ChargerCrazed

Re: E Body - Parts For Sale - 1st Quarter - 01/02/18 01:08 PM

1971 Plymouth Cuda Bucket Seat Foam.
Upper and Lower foam for one bucket seat only. Original, used condition.
$50 plus shipping from NY.
If interested or need more pics, email: chargercrazed@usa.com
Posted by: PHYSIXX

Re: 340/360 engine mount brackets - 01/02/18 01:16 PM

I have for sale a pair of biscuit style 340/360 B/E body engine mount brackets that are all in great shape. They just need to be cleaned and painted. These brackets will NOT fit the A-body cars as the engine mount holes are in a different place. I would like to get $25 for the set plus the shipping.

Edison, NJ
rider1454 at aol.com
Posted by: 70gtx440dana

70 E body floor shift steering column - 01/02/18 03:17 PM

I have a very nice black 70 E body floor shift steering column for a power steering car. Includes crush can.....no key. Should detail up nicely. $250 + shipping from MI 48837. Joe 517-243-7115 or jsawyer@wowway.com
Posted by: vinnyd76

For Sale: Pair of 1970 Challenger Doors - 01/02/18 06:19 PM

For sale: Pair of original 1970 Challenger doors (Cuda doors have been sold). Selling for a friend... told they came from out west

Location: Metro Detroit

Price: $500.00 obo
Posted by: vinnyd76

For Sale: Various E-Body Parts - 01/02/18 07:25 PM

Listing various E-Body Parts for a friend.

E-Body Parts (quite a few convertible parts)
1. Original Tail Panel with tail lamps: $575 for the set
2. Challenger Head Lamp Buckets NOS: $125 for the pair
3. Original 70 Cuda Park/Turn Signal Light Assemblies: $300
4. White Armrest without base: $25
5. Black Armrest with base: $45
6. Original door locks: $50
7. 71 Challenger right side headlamp bezel: $225
8. E-Body tinted quarter glass: $275 each
9. E-Body clear quarter glass: $175
10. E-Body foot pedal wash fluid pedal with hose: $35
11. E-Body 3-spoke steering wheel horn ring switch works mounting base needs slight repair: $95
12. E-Body gas pedal dress up: $45
13. New ‘Cuda-340 emblem: $60
14. 1970 right hand side mirror base: $75
15. 1970 E-Body master cylinder cover: $25
16. Under dash switch holder: $10
17. E-Body underhood installation pad clips: $25.00
18. Convertible door spacers on read edge of door – 2 per car: $20/set
19. Plymouth hood emblem – NOS: $95.00
20. Cuda rear bumper guard brackets – LH/RH: $35
21. Challenger rear bumper guard brackets – LH/RH: $35
22. New jounce hose: $20.00
23. E-Body reproduction interior door handles: $55
24. E-Body ashtray and bezels: $35.00
25. Complete set of white used Legendary front and rear seat covers for a convertible: $300
26. 70 Cuda jack assembly holding brackets: $70
27. E-Body master cylinder (manual brakes) gasket: $5.00 each

Tried to get all parts in photos. Please email me for additional information and/or photos.

Location: Metro Detroit


Posted by: FJ6AAR

71 Cuda Barracuda headlight buckets - 01/02/18 11:39 PM

Hi, I have a new pair of reproduction 71 'Cuda headlight bucket extensions. They are new but are missing two of the four "L" shaped brackets. The two shorter ones are there but the two longer ones are missing. Easy to fabricate if you're handy. $175.00 shipped. Continental 48 only. I accept Paypal and Postal Money orders.
I also have new reproduction headlight buckets for a 71 Cuda. These are the buckets that get welded into the front of the fenders before these brackets get bolted on - so you can convert 1970, 72-74 fenders to 1971 fenders. They are still welded into new reproduction 71 fenders that were destroyed - but the buckets are fine, you just need to cut them out of the fronts of the fenders. I have the louver pieces also to graft in as well as 70-71 side marker light pieces. Will sell all for $300.00

PM me here for questions. Will also trade for E Body stuff and/or two used, very nice, 426 Hemi connecting rods - stock pin and length.

Please click on link below for a photo

[img:center]https://ibb.co/f52MTG[/img]
Posted by: JRepucci

Re: E Body - Parts For Sale - 1st Quarter - 01/03/18 08:54 PM

70-1 cuda/Challenger HI/LO horn set $200

70-1 AM radio, no cut wires, chrome buttons $200

72-74 AM radio $75

trans crossmember $100
Posted by: bremotorsports

Re: E Body - Parts For Sale - 1st Quarter - 01/03/18 09:08 PM

NOS 2444442 Starter Relay

Date code 3349 (334th day 1969)for mid-year 1970 model year Mopars.

Fits manual and auto.

85.00 plus shipping.

Bill Rolik

201-394-5533 Cellular

bremotorsports@verizon.net

PayPal preferred.
Posted by: bremotorsports

Re: E Body - Parts For Sale - 1st Quarter - 01/03/18 09:11 PM

2444442 NOS Starter Relay

Date code 241 (24th week 1971) for late production 1971 model Mopars. Fits manual and automatic.

85.00 plus shipping.

Bill Rolik

201-394-5533 Cellular

bremotorsports@verizon.net

PayPal preferred.

Posted by: bremotorsports

Re: E Body - Parts For Sale - 1st Quarter - 01/03/18 09:33 PM

Special "Q" Style Muffler Clamps for E-Body cars. These are the clamps that secure the exhaust tips to the mufflers.

Only 3 sets left!!!

35.00 per set of 2, plus shipping.

Bill Rolik

201-394-5533 Cellular

bremotorsports@verizon.net
Posted by: BBCoronet

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 11:33 AM

Selling/Parting 72-74 Cuda Drag car. Project was started and never finished. Body has some rust and cowl has been cut down. No interior, Dash or wiring. All new; CE back half, 10/12 pt cage, Four link, Coil overs, 46" Dana 60 w/spool & 4:88 gears / Strange axles w/5/8 studs (Again all New), Disc brake brackets(no brakes) 2 CST skinnies up front, 1 out back, 1 Halibrand?? out back. Has parachute mount and wheelie bar brakets. Stock K frame w/sway bar. Floor hump with console brackets, Steering column. Solid roof and window channels, No front sheet metal, doors or deck lid....No VIN or Title. $1800.00 Firm whole or PM for Parts
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 03:40 PM


4-speed tunnel hump closeout sale!!
Limited quantities remaining!
We’re going to stop carrying these,
So We’re Offering Them For Blowout Prices And Once They’re Gone, They’re Gone!
So don’t wait

67-up A-body $130,
E-body $130,
62-65 B-body sold out
66-70 B-Body $130,
71-74 B-Body With Console $130

302-398-0821

TONYSPARTS.COM

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 03:44 PM

a New Product!!
1970 E-body + 1971 Thru 1974 B+E-body Consoles
tonysparts.com

These Are Injection Molded As Original And Have The Correct Grain

They Fit And Look Great

Both The 1970 Only Style And The 71-74 Styles Are Available

The 1970 Style Fits All 1970 Cudas And Challengers,
And Have The Correct Seat Belt Receptacle Opening

The 71-74 Style Fits All 1971 Thru 1974 Cudas, Challengers, Road Runners, Satelites And Chargers

Automatic And 4-speed Versions Of Both Types Are Available

They Are Complete Less Top Plate, Ashtray + Door Lock.
They Include All Of The Clips For The Topplate.
(new Ashtrays + Console Door Locks Are Now Available!!)

Used Originals Are Usually Broken Or Are Missing From The Car Or Needed When Converting To Floorshift.

$325....1970 E-body Automatic Console
$345....1970 E-body 4-speed Console
$225....71-74 E+B-body Automatic Console
$245....71-74 E+B-body 4-speed Console

These Are In Stock And Ready To Ship

Available Through
Tony’s Parts
302-398-0821
tonysparts.com

Tony’s Parts

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 03:46 PM

New Product!

The 1970-1971 #2944450 15”x7” Steel Wheel Is Finally Available As An Affordable Licensed New Reproduction for $995 per set! (includes date stamping for your application!!)


They have all of the correct characteristics, stamps and markings visible once installed on the car!

These #2944450 15”x7” Steel Wheels Were the Standard Wheel on Every Hemi E-Body and Were the Standard Wheel on All Other 1970-1971 E-bodies And B-Bodies when 15” Tires Were Optioned. They Were Also the Spare Wheel Used On All B-Body 15” Wheel Cars.

These #2944450 15”x7” Steel Wheels Are The Rarest Of Wheels To Find Because Many Threw Away These Plain Steel Wheels In Lieu Of Mags Back In The Day.

So Due To Their Rarity And Applications Originals of the #2944450 15”x7” Steel Wheels Have Soared In Price To Over $4000 Per Set Of 4!!
We’re Offering Them for Less Than 25% Of That Price!!

Our New Wheels Are Licensed By Chrysler And We Are Able To Date Code Them For Your Application!

tonysparts.com
302-398-0821
Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 03:47 PM

A NEW PRODUCT!!

The Rare And Hard To Find #2658456, #2863260, And #3462107 Clutch Fan Drive Units Are Now Available As A New Reproduction.


These Were Used On 1966 Through 1972 B-Body, E-Body And C-Body Cars With Air Conditioning

These Are Commonly Missing Or Worn Out, Loose And Wobbly.

These Appear Like The Originals with a correct face, rear fins and closed bolt holes.

They Are Very Affordable At $200 And In Stock At Tony’s Parts

tonysparts.com
Please Email Through Website

302-398-0821

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 03:48 PM

New Product!

E-Body Radio Surround Bezel.


These Are Commonly Broken Or Missing.
It Surrounds The Radio And Fills The Void To The Dash.
It Complements Our E-Body Heater Control Panels And Is Finished In The Correct Wrinkle Paint.

Fits All E-Bodies Except 70 Challengers With Standard Dash

Available From Tony’s Parts For $60
They Are In Stock And Ready To Ship

302-398-0821

TONYSPARTS.COM
Please call or email through our website

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 03:49 PM

New Product
E-Body Ashtray Inserts with Rivets.


Replace That Old Rusty, Pitted And Faded Ashtray Insert With A New Correct Finished Insert.
Comes With Factory Style Rivets to Ease Installation

Available From Tony’s Parts For $75
They Are In Stock And Ready To Ship

302-398-0821

TONYSPARTS.COM
Please call or email through our website

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 03:50 PM

New Product

Radio Knobs Available For:

1970 B-Body
And
E-Body And
71-74 B-Body


These Are Commonly Missing From Cars And Or Radios.
Put These New Knobs On With New Chrome Ready To Install

Available For $35 For A Set Of 4 (2 Inner And 2 Outer)

They Are In Stock And Ready To Ship

302-398-0821

TONYSPARTS.COM
Please call or email through our website

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 03:54 PM


Check out our latest New Product offering:



Original Heavy Duty Leaf Springs With The Correct Numbers Are Hard To Find. Many Cars Have Had Their Leaf Springs Replaced Throughout The Years And Don’t Have The Correct Ones Installed. While New Leaf Springs Are Available Today They Don’t Have The Correct Factory Stamping Numbers On Them.

So that’s Where We Saw the Void That Needed to Be Filled.

We’ve Duplicated the Dimensions, Shape and Fonts Used on the Original Springs

We Have Made The Right And Left Lower Leaf Spring With The Correct Part Numbers For The Following Applications:
-70-71 E-Body 440 and 426 Hemi Cars #3400024-34
-1970-1/2 AAR Cudas + T/A Challengers #3400048

These Are Now In Stock And Available From Tony’s Parts For $175pr

TONYSPARTS.COM

Please email through website

302-398-0821

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 03:57 PM

New Product From Tony’s Parts

Tony’s Parts Is Proud to Offer E-Body (70-74 Barracuda and Challenger) Correct Turn Signal Switch Levers/Stalks


These Have the Correct Bend and Are the Correct Length

Many cars out there don’t have the correct turn signal lever installed and the lever doesn’t come close enough to the steering wheel for ease of accessibility like the originals were

There Have Been Incorrect Ones Offered In the Past, Even the Last Versions Sold By Chrysler Didn’t Match the Assembly Line Levers, but These Are Just As the Originals And Less Expensive Too!

$40 Each

TONYSPARTS.COM
Please email through website

302-398-0821

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 03:58 PM

All New E-body Jack Hooks.

Mopar Licensed Correct With All Numbers and Pentastars as the Originals!

Finished In Their Correct Original Colors.


Available For:

70-71 Cuda #2931100 $100,
70-71 Cuda #2931101 $100,
70-71 Challenger #2931102 $100,

Tony’s Parts
302-398-0821
tonysparts.com

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:01 PM

New Product
1970 And 1971-1976 Floorshift Steering Column Collar Sets

1970


1971 + newer


Whether It’s 4-Speed Or An Automatic Everyone Wants To Have A Car With A Floorshifter.

One Of The Items Needed For A Floorshift Conversion Is A Floorshift Steering Column, Those Are Getting Very Difficult And Expensive To Find. So We Have Just Released These 3-Piece Steering Column Collars For Converting A Column Shift Steering Column To A Floorshift Steering Column.

We Made The 1970 And The 1971-1979 Versions That Fit All A,B,C,E Body Columns Without Tilt/Telescopic

They Are In Stock And Ready To Ship For $160 Set

302-398-0821

TONYSPARTS.COM
Please call or email through our website

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:04 PM

A NEW PRODUCT!!

66-70 Chrome Seat Adjuster Knobs,


There Were Used On Bucket And Bench Seat Applications For All Body Styles,
They Are Typically Worn Or Missing And Haven’t Been Available For A Very Long Time
These Are A High Visibilty Part That Is In Your Face, Nothing Worse Then Old Pitted Chrome Staring You Right In The Eye When You Open The Door

They Are In Stock And Ready To Ship

Price is $40pr

Tony’s Parts
302-398-0821
tonysparts.com

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:05 PM

! All New Part.

Lower Rod For Automatic Floor Shift Linkage For A,B,C and E-body Cars.
(Slight Modification Needed For Use On 1970 E-body With Column Lockout Linkage)

This Rod Is Almost Always Missing And Is Needed For Completing Your Automatic Floor Shift Linkage Set $45.

These Are In Stock And Ready To Ship

Tony’s Parts
302-398-0821
tonysparts.com

Harrington Delaware 19952
Posted by: rayztoy

BIG BLOCK FUEL PUMP - 01/04/18 04:05 PM

New Fuel Pump AFP 4845 NAPA Big Block High Performance w/ 3/8 (383,440)

Buyer pays shipping, Cash or USPS Money Order ONLY SOLD

Thanks for the ad Moparts!
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:09 PM

A NEW PRODUCT!!

#2863216 18-1/2” 1968-1973 7 Blade Fan For Use With Clutch
Licensed With Part Numbers And Pentastar
Was Used On All V8 B-Bodies, E-Bodies And C-Bodies With A Clutch Fan Drive Unit



These Fans Are Commonly Missing, Damaged Or Rusty And Have Become Very Difficult To Find In Serviceable Condition.
We Saw The Need To Make These Fans, So We Did. But We Didn’t Just Make A Fan, We Got It Licensed By Chrysler As A Correct Mopar Restoration Part. So These Fans Have All Of The Factory Original Part Numbers, Pentastars, Markings, Etc. They Even Have The White Ink Stamped “Engine Side” On The Rear Of The Fan Just Like The Originals

These Are Now In Stock And Available From Tony’s Parts For $140ea

302-398-0821

tonysparts.com
Please Email Through Website

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:09 PM

Concours correct 2806070 fan clutches.



We came out with a previous version and the face wasn't 100% correct, so we listened to your request and have redesigned the face to match the originals.

The Rare And Hard To Find #2806070 Clutch Fan Drive Units Are Available As A New Reproduction.

These Were Used On 67-71 426 Hemis, 67-71 Big Blocks And 1970 340s Without Air Conditioning.
These Were Used Into The 1971 Model Year

These Are Commonly Missing Or Worn Out, Loose And Wobbly.

These are in stock and available for $300.

We also offer part # and date code stamping for $10 additional.

Of course we still have our first version available for $200 for those who don't mind the bugs that are stuck in your radiator not having to look at a less then 100% correct face fan clutch.

They Are In Stock And Ready To Ship For $300
Part number and date code stamping available for $10 addtl

302-398-0821

TONYSPARTS.COM
Please call or email through our website

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:11 PM

A NEW PRODUCT!!

The Rare And Hard To Find #2806070 Clutch Fan Drive Units Are Available As A New Reproduction.

These Were Used On 67-71 426 Hemis, 67-71 Big Blocks And 1970 340s Without Air Conditioning.
These Were Used Into The 1971 Model Year

These Are Commonly Missing Or Worn Out, Loose And Wobbly.

These Appear Extremely Close To Original And Even Have The Correct Red Seal.

They Are Very Affordable At $200 And In Stock At Tony’s Parts



tonysparts.com
Please Email Through Website

302-398-0821

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:12 PM

A NEW PRODUCTS!!

1970 Challenger Right + Left Side Lower Dash Trims.

This Is Specific To 1970 Challenger Only.





These Are Now Available From Tony's Parts For $110 Per Side

tonysparts.com

302-398-0821

Tonys Parts

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:13 PM

A NEW PRODUCT!!

A New A/C Heater Control Panel And Switch Bezel Is Available For Your Rallydash Equipped Cuda Or Challenger.



These Are Specific To Rally Dash Equipped Cars.

They Look And Fit Just Like The Originals.

The Vent Register Functions As Original And The Detail All Of The Parts Is Accurate.

Just Install Your Buttons And Switches.

They Are Available As A Set For $220 ,
We Have A Small Quantity Of Extra Inner Switch Bezels Available For $95,

tonysparts.com

302-398-0821

Tonys Parts

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:13 PM

A NEW PRODUCT!!

72-74 Challenger Rally Plastic Fender Scoop Inserts.

This Commonly Broken Or Missing Part Mounts Behind The Fender Scoop Bezel Is Injection Molded And Correct In Appearance + Fit

$85 Pair,

302-398-0821

tonysparts.com

Tony’s Parts

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:14 PM

A NEW PRODUCT!!




Right Or Left Hand Lower Dash Trim

Fits All E-bodies Except 70 Challenger)

This Commonly Missing Or Broken Part Mounts To The Dash Frame + Runs From The Center Of The Dash Pad Down Below The Radio + Over To The Steering Column

It Is Injection Molded, Has The Correct Grain + Fits Great

Available Through Tonys Part’s For $75 Per Side

In Stock + Ready To Ship

Tony’s Parts
302-398-0821

tonysparts.com
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:14 PM

A NEW PRODUCT!!
72-74 ‘cuda + Barracuda Headlight Bezels

Injected Molded, Chromed + Detailed Correctly

$125 Per Pair

In Stock + Ready To Ship

Tony’s Parts
302-398-0821

tonysparts.com

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:14 PM

A NEW PRODUCT!!

E-BODY CONSOLE DOOR

INJECTION MOLDED, 2 PIECE LIKE ORIGINALS
READY TO INSTALL


$75

302-398-0821

TONYSPARTS.COM

TONY’S PARTS
HARRINGTON DELAWARE 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:15 PM

A NEW PRODUCT!!

1967 and newer thermostat housings


These are commonly missing or oxidized so badly that they wont even seal much less look good.
So we reproduced them just like the originals including the numbers on them.
We even went ahead and made 2 versions of them, the standard version that parting line is more smooth and the concours version that has a more pronounced parting line. Available for $40 and $45

In Stock + Ready To Ship

302-398-0821

TONYSPARTS.COM

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:15 PM

A NEW PRODUCT!!
1970-1974 E-body Rally Dash Heater Control Panel



Fit And Look Are Perfect

Injection Molded Plastic Finished And Detailed With The Correct Lettering And Texture, Just Like The Originals

All Tabs And Bosses Are Present

Available Through Tony’s Parts For $115

302-398-0821

tonysparts.com

Tony’s Parts

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:16 PM

70-71 E-body Rally Dash Tripometer + Clock Reset Knobs


These Are Usually Missing Or The Chrome Has Peeled Off Them

These Are Brand New And Chromed Just Like The Originals

They Are In Stock And Available For $40 pair

302-398-0821

tonysparts.com

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:16 PM


Tony’s Parts Is Proud To Announce Their Latest Reproduction Part

72-74 E-body Rally Dash Speedometer Tripometer Reset Button/Knob



These Are Usually Missing, Broken Or The Chrome Has Peeled Off Them

These Are Brand New Plastic And Chromed Just Like The Originals

They Are In Stock And Available For $20 Each

302-398-0821

tonysparts.com

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:17 PM

A NEW PRODUCT!!

E-Body Overhead Console Light Lens
Fits All 70-1 Barracuda Gran Coupes, Challenger “SE”s And All Others With The Overhead Console Light

These Are Commonly Broken, Yellowed Or Missing


Injection Molded Plastic Like Originals,
In Stock And Ready To Ship

$45

302-398-0821

tonysparts.com

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:18 PM

A NEW PRODUCT!!

Dash Mounted 4-Speed Reverse Light



Used on 68-Newer 4-Speed Cars
$75 NEW LOWER PRICE!

302-398-0821

TONYSPARTS.COM

Tony’s Parts

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:18 PM

! Finally New E-Body A-Pillar Trims That Fit!!



Tonys Parts Is Proud To Release Their E-Body A-Pillar Trims Available With Their 2 Different Screw Locations For 1970 Thru Mid 1971 And The 1971 And Newer Version. They’re Injection Molded Plastic, Have The Correct Grain And Hole Locations Per Your Application

Available For $155pr.

tonysparts.com

302-398-0821,

Tonys Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:19 PM

A NEW PRODUCT!!
New Reproduction Console And Glovebox Door Locks,

These New Locks Work Smooth And Fit Just Like The Originals, Replace That Worn, Broken Or Missing Lock With A Nice New One.


They Fit:
64-74 B-body & 70-74 E-body Console Lids,
69-76 A-body Console Lids (must Remove Bezel),
62-69 B-body Glovebox Doors &
68-69 A-body Glovebox Doors.

Available For $40,

tonysparts.com

302-398-0821,

Tonys Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/04/18 04:19 PM

A NEW PRODUCT!!
New Reproduction Ashtrays And Bezels,

These Are An Exact Replacement Of The Original, So Now Is Your Chance To Replace The Rusty, Broken Or Missing Ashtray With A Brand New Shinny One.

They Fit 1971-74 E-body And B-body Consoles,
1970 E-body Rear Interior Panels And
66-70 B-body Armrests

Available For $45,
tonysparts.com

302-398-0821,

Tonys Parts

Harrington Delaware 19952
Posted by: Claudia

Misc Parts - 01/04/18 04:43 PM

BUCKET SEAT TRACK SET
One LH set and one RH set
I believe these may be 68 - 72 GM seat tracks however they were bolted to my e-body bucket seat frames so I know the mounting pattern will fit some Mopar seat frames.
$60.00 OBO

RALLYE WHEEL SET
5 x 4.5" w / trim rims and lug nuts included (no center caps)
Front Tires: P195 / 75R14
Rear Tires: P235 / 60R14
$325.00 OBO
Posted by: bremotorsports

Re: Misc Parts - 01/04/18 08:40 PM

2095501 Assembly Line Ballast Resistor

Correct stampings and terminals.

100.00 plus shipping.

Only 2 left.

Bill Rolik

201-394-5533 Cellular

bremotorsports@verizon.net

PayPal preferred.
Posted by: bremotorsports

Re: Misc Parts - 01/04/18 08:43 PM

E-Body Pitman for cars with standard steering (non-fast ratio).

Nice used piece that you can bolt right in.

195.00 plus shipping.

Bill Rolik

201-394-5533 Cellular

bremotorsports@verizon.net

PayPal preferred.
Posted by: bremotorsports

Re: Misc Parts - 01/04/18 08:47 PM

6138 Thermoquad (Original application is very late 71 340 Manual Trans, plus 72 340 Manual Trans)

Or use with whatever combination you like!

Nice used piece!

200.00 plus shipping.

Bill Rolik

201-394-5533 Cellular

bremotorsports@verizon.net

PayPal preferred.
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 01/05/18 12:30 PM

A NEW PRODUCT!!
E-body Speaker Grille



In Stock and Available For $65,
tonysparts.com

302-398-0821,

Tonys Parts

Harrington Delaware 19952
Posted by: DPS_1

1970 340 4 BBL Manual Distributor 3438317 - 01/05/18 05:40 PM

For sale is a 1970 340 4 BBL Manual Dual Point Distributor 3438317. The distributor will require a rebuild plus a vacuum advance.
The distributor is offered for $75 plus shipping. Please contact me at dpsuozzi@gmail.com
Posted by: 5carguy

Re: E Body - Parts For Sale - 1st Quarter - 01/05/18 06:47 PM

70-71 E body AM radio.Wires are cut and don't know if it works.It's in decent shape with knobs.$150.00 plus shipping.
PM here or Rtroyer1@comcast.net
Part is located in S.W. Florida
Thanks for the ad Moparts
Posted by: bremotorsports

Re: E Body - Parts For Sale - 1st Quarter - 01/05/18 07:13 PM

N-9Y Champion Spark Plugs for the 68-73 340 Mopar.

40.00 plus shipping.

Last set available!

Bill Rolik

201-394-5533 Cellular

PayPal preferred.
Posted by: bremotorsports

Re: E Body - Parts For Sale - 1st Quarter - 01/05/18 07:16 PM

2951984 NOS Power Steering Belt for 70-71 340 E-Body (W/O AC)

This is a real Mopar belt. Last one available!

60.00 plus shipping.

Bill Rolik

201-394-5533 Cellular

bremotorsports@verizon.net

PayPal preferred.
Posted by: b5cuda69

Re: E Body - Parts For Sale - 1st Quarter - 01/05/18 09:55 PM

Hi, listing a pair of hood "cuda 383" OEM emblems, all studs intact, no broken or missing parts. $60 plus shipping for the pair.
Posted by: mopar_muscle

Re: E Body - Parts For Sale - 1st Quarter - 01/06/18 11:42 AM

These 360 heads came off a car with only 5500 miles since the rebuild. No rocker assembly or springs $100 plus shipping. mopar_muscle76@yahoo.com or 707 888 7374
Posted by: 70440+6bbl

Re: E Body - Parts For Sale - 1st Quarter - 01/06/18 04:19 PM

SOLD 1970 and early ‘71 A-B-E bucket seat hinge covers. All four in nice shape. Driver’s button is not attached anymore, but works fine once installed.

$225.00 shipped in the CONUSA. SOLD
Posted by: Sixpak

Steering wheel crush can - 01/07/18 12:41 AM

In good shape. WYSIWYG. $100 plus shipping from Florida. USPS Money order or paypal +4%. PM ME HERE.
Posted by: littleredcoffin

VIN TAG RIVETS - 01/07/18 12:57 PM

I HAVE REPRODUCTION VIN TAG RIVET...CORRECT 6 SIDED ROSETTE RIVETS...HOLDS VIN TAG TO DASH PAD OF ALL 70-74 CUDA OR CHALLENGERS....$65PR,SAY YOU SAW THE AD HERE AND GET FREE SHIPPING.CALLS ONLY 603 209 1678...NO EMAILS..I WILL NOT RETURN ANY,NONE!! PAYMENT BY US POSTAL MONEY ORDERS ONLY.
Posted by: DUSTER900

70 cha AM-8 TRK RADIO COVER PLATE - 01/07/18 01:09 PM

[i]I HAVE A EXC COND
AM-8 TRACK RADIO COVER PLATE

[/i]
hard to find piece

this one is perfect

mail me for pics

$200.00 obo

586-596-5363 text me [font:Comic Sans MS]
[/font]
Posted by: crabman173

Re: E Body - Parts For Sale - 1st Quarter - 01/07/18 03:19 PM

SIX PACK FOR 70 MANUAL TRANS CAR
best I can tell ( I am no numbers guy) this looks like a matching set for a 1970 manual trans car real barn find last week--cast iron 440 six pack intake date 11/69 carbs are as follows
End list 4175 date 1769
end list 4365 date 1769
center carb 4374-1 date 0220

intake fine just needs blasting--carbs have sat for long time but are untouched originals no damage just need resto
$1600 plus UPS or pu in NC calls only 704 244 6649 or email dusterdave173@gmail.com

Thanks david
Posted by: littleredcoffin

HOOD RELEASE CATCH SUPPORT - 01/08/18 12:11 PM

THIS IS IN GOOD SHAPE HAS A SMALL CRACK I HAVE SOME IN PICTURE,OTHER WISE IS IN TERRIFIC SHAPE,$15,CALLS ONLY 603 209 1678
Posted by: littleredcoffin

CHALLENGER ARMREST PADS - 01/08/18 12:13 PM

BROWN IN COLOR,GOOD SHAPE FOR THE AGE $12PR,CALLS ONLY 603 209 1678.PAYMENT BY US POSTAL MONEY ORDERS ONLY.I WILL NOT ANSWER EMAILS...CALLS ONLY
Posted by: littleredcoffin

CHALLENGER DOOR INSERTS - 01/08/18 12:16 PM

CHALLENGER INTERIOR PANEL DOOR INSERTS OR PLAQUES.GOOD SHAPE $20PR,CALLS ONLY 603 209 1678.I WILL NOT ANSWER EMAILS...PAYMENT BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

REAR WINDOW DEFROSTER - 01/08/18 12:18 PM

REAR WINDOW DEFROSTER,WORKS GREAT $20,CALLS ONLY 603 209 1678,I WILL NOT ANSWER EMAILS....PAYMENT BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

rear window defroster bezel - 01/08/18 12:23 PM

This is in good shape....You will need this if your up grading to a defroster system $6,calls only 603 209 1678.I will not answer emails..so call.Payment by US POSTAL money orders only
Posted by: littleredcoffin

INTERIOR ROOF LINE PLASTICS - 01/08/18 12:25 PM

THIS HOLD SEAT BELT STRAPS TO THE HEADLINER AREA.ALWAYS MISSING $5SET OF 4,CALLS ONLY 603 209 1678,I WILL NOT ANSWER EMAILS...PAYMENT BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

CUDA EXHAUST TIPS $10pr - 01/08/18 12:27 PM

CUDA EXHAUST TIPS,SOME RUST.GREAT FOR A CAR YOUR TRYING JUST TO PUT TOGETHER TO SELL.CHROME DESCENT $10PR,CALLS ONLY 603 209 1678,PAYMENT BY US POSTAL MONEY ORDER ONLY..NO EMAILING..
Posted by: moparply

Re: E Body - Parts For Sale - 1st Quarter - 01/08/18 12:41 PM

NOS Cuda GE headlights, $250 pair

I can send pictures to your email address.

Email Kenei@comcast.net
Posted by: littleredcoffin

$7 71-74 RADIO FACEPLATE GOOD SHAPE $7 - 01/09/18 10:52 AM

COLOR IS BLACK,FINISH IS DESCENT.NOT CRACKED $7,CALLS ONLY 603 209 1678..NO EMAILS...PAYMENT BY US POSTAL MONEY ORDERS ONLY
Posted by: b5cuda69

Cuda Rallye Hood Scoops/Inserts - 01/10/18 09:10 AM

Cuda Rallye Hood Scoops with inserts - a pair of '71-74 style (screws on insert plates are visible from exterior). Inserts are excellent, housings have some wear but restorable. Pictures available on request, $150 plus shipping. Thanks!
Posted by: littleredcoffin

$7UPPER CONTROL ARM ADJUSTMENT COVERS $7PR. - 01/10/18 12:38 PM

UPPER CONTROL ARM ADJUSTMENT COVERS.MATCHED PAIR OFF A CUDA.NOT ALL PITTED UP!! $7PR.CALLS ONLY 603 209 1678.NO EMAILING.PAYMENT BY US POSTAL MONEY ORDERS ONLY.I SELL MY PARTS FOR LESS,ALWAYS
Posted by: littleredcoffin

PASSENGERS SIDE KICK PANEL BLACK $10 - 01/10/18 12:49 PM

PASSENGERS SIDE KICK PANEL.GOOD CONDITION $10,CALLS ONLY 603 209 1678,NO EMAILS.PAYMENT BY US POSTAL MONEY ORDERS ONLY.....I SELL FOR LESS EVERY DAY
Posted by: littleredcoffin

CUDA TAILLIGHT AND BACK UP LIGHT $6PR - 01/10/18 12:51 PM

THESE ARE NOT PERFECT,BUT THE PRICE TO FILL THE HOLE TO A CAR THAT HAS THEM MISSING OR ARE BROKEN IS PRICELESS.$6PR,CALLS ONLY 603 209 1678.NO EMAILS..PAYMENY BY US POSTAL MONEY ORDERS ONLY..I SELL FOR LESS EVERY DAY
Posted by: littleredcoffin

ASH TRAY AND MOUNTING FRAME - 01/10/18 01:10 PM

ASHTRAY AND MOUNTING FRAME $8PR...CALLS ONLY 603 209 1678.NO EMAILS PAYMENT BY US POSTAL MONEY ORDERS
Posted by: littleredcoffin

$8 CUDA SPARE TIRE HOLD DOWN BRACE AND ROD $8 - 01/11/18 02:26 PM

SPARE TIRE HOLD DOWN BRACKET AND ROD...$8,CALLS ONLY 603 209 1678,NO EMAILS. PAY BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

$5 TRUNK LID HINGES MATCHED PAIR $5 - 01/11/18 02:28 PM

IN GOOD SHAPE,NEED PAINT...CAME OFF A 340 CUDA I PARTED OUT.$5PR.CALL ONLY...PH # 603 209 1678,PAY BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

$10 72-74 BLACK SUNVISORS - 01/11/18 02:30 PM

72-74 BLACK SUNVISORS,DESCENT SHAPE.GREAT FOR A DRIVER OR A LITTLE BETTER.$10PR,CALLS ONLY 603 209 1678.NO EMAILS...PAY BY US POSTAL MOENY ORDERS ONLY
Posted by: littleredcoffin

$8 DRIVERS UNDER DASH AIR VENT $8 - 01/11/18 02:38 PM

DRIVERS UNDER DASH AIR VENT,FLAPPER WORKS GREAT,SOME PITTING IN FLAPPER DOOR..NO HOLES. $8,CALLS ONLY 603 209 1678,NO EMAILS.PAY BY US POSTAL MONEY ORDER
Posted by: littleredcoffin

$5 NON RALLY GAUGE NON A/C HEATER CONTROLLER $5 - 01/11/18 02:50 PM

NON RALLY GAUGE HEATER CONTROLLER ASSEMBLY...NON A/C.MOVES FREELY.$5,CALLS ONLY 603 209 1678.NO EMAILS..PAY BY US POSTAL MONEY ORDER ONLY
Posted by: littleredcoffin

NON RALLY CONTROL PANEL BEZEL - 01/11/18 02:55 PM

NON RALLY GAUGE CONTROL PANEL BEZEL..GOOD SHAPE,NOT CRACKED $5,CALLS ONLY 603 209 1678.PAY BY US POSTAL MONEY ORDER..NO EMAILS
Posted by: littleredcoffin

ALL 3 CONTROL PANEL SWITCHES - 01/11/18 02:57 PM

DASH LIGHT DIMMER SWITCH $4,2 SPEED WIPER SWITCH $4,DASH LIGHT/HEAD LIGHT SWITCH $4,OR ALL 3 FOR $10,CALLS ONLY 603 209 1678.NO EMAILS..PAY BY US POSTAL MONEY ORDER ONLY
Posted by: littleredcoffin

NON RALLY GAUGES AND BEZEL - 01/11/18 03:01 PM

NON RALLY GAUGES AND GAUGE BEZEL.LENSE IS CLEAR,GAUGES COLORING GOOD,BEZEL IS CLEAN AND HAS ALL RED AND HIGH BEAM LENSES INTACT.GAUGES $10,BEZEL 10.OR THE PAIR $15,CALLS ONLY 603 209 1678.NO EMAILS.PAY BY US POSTAL MONET ORDERS ONLY
Posted by: littleredcoffin

REAR FRAME RAIL TIE DOWN BRACKETS - 01/11/18 03:14 PM

REAR FRAME RAIL TIE DOWN BRACKETS.ALWAYS MISSING.$9PR,CALLS ONLY 603 209 1678,PAY BY US POSTAL MONEY ORDERS ONLY
Posted by: NortheastMopar

Re: E Body - Parts For Sale - 1st Quarter - 01/11/18 06:55 PM

Have a 70 only AM 8 TRACK radio. Sold as is. 500.00
Posted by: QuickBpBp

NOS 1970 Dodge Challenger Reverse Lamp Lens - 01/12/18 12:45 PM

Nos 1970 Challenger reverse Lamp lens. Excellent condition, No original packaging. Only factory flaw on close inspection I can see is if you look close at it you can see where a little "fog" from the middle "D" from where the pin was melted back is seen outside the letter. This is perfect for a high end restoration if you want real parts. $165 shipped

SOLD FAST THANKS MOPARTS!

Parts are located in SE PA.
Can send more pictures if interested.
Pm here on the board or e-mail bretts440"at"frontiernet.net
Thanks for free ad MOPARTS!
Posted by: QuickBpBp

Reproduction 1970 Dodge Challenger Reverse Lamp Lens - 01/13/18 01:14 PM

Nice Reproduction 1970 Challenger reverse Lamp lens. Excellent condition and has all part #'s like an original piece except the pins on the letters are not melted back to the lens. That's the only difference when comparing it to the NOS one I sold above. From what I see these quality reproductions are gone now.
$115 shipped

Parts are located in SE PA.
Can send more pictures if interested.
Pm here on the board or e-mail bretts440"at"frontiernet.net
Thanks for free ad MOPARTS!
Posted by: alrrbeepbeep

Pair of 70 Challenger Fiberglass Fenders - 01/13/18 02:06 PM

Like new, with wheel well moldings

$300

Al - 201-446-7362
Posted by: alrrbeepbeep

70 Challenger Vallance - 01/13/18 02:09 PM

Excellent condition..

$150

Al - 201-446-7362
Posted by: daryld

Re: E Body - Parts For Sale - 1st Quarter - 01/13/18 04:59 PM

E-body PS floor shift column with nice aftermarket wheel. Excellent condition. Was refurbished a few year ago. Asking $500. Will ship at buyers expense. Thanks for looking and God bless.
Posted by: Mastershake340

Re: E Body - Parts For Sale - 1st Quarter - 01/13/18 10:26 PM

NOS takeoff left Challenger 15" fender (rolled wheel opening lips)
Was installed on my car in 1980 and removed in the late 90s, is painted but inside is still original factory primer with stenciled part number 3579381
$750 Pickup only Chicago area near O Hare
brads147 at comcast dot net or PM here
Posted by: rarefish

NOS 70-71 Front Drum Brake Hoses, PN. 3461730 - 01/14/18 01:35 PM

Selling this NOS pair of 10" or 11" Drum Brake Hoses.
They will fit both E and B bodies.
They have dates codes of 212 9 and 225 9

.....SOLD.....


Payment by a US Postal Money Order or by Paypal + the added fee.

Posted by: RoadRunner

70 Challenger Side Marker PS - 01/14/18 09:20 PM

Side marker light for 1970 Challenger. Chrome looks good. Wiring has been fixed with butt connector and has electrical tape. See picture.

Part is located near Buffalo NY. Asking $50 plus shipping. PM me here if interested.
Posted by: JTECDN

1970 Challenger bulge hood OEM - 01/15/18 02:10 AM

Selling an original 1970 Challenger R/T hood. This hood was stored indoors since the 1980s and had original paint up until recently. The hood was blasted and then expoy primed by a local shop that builds big 3 and SEMA level cars.
It has factory hood pin holes. The scoop inserts still have their original B5 paint and the blockoff plates are present
The hood is Very straight with just a couple shadow imperfections in the surface. There is pitting underneath but not severe
I would rate this hood 9 out of 10 and it would be very difficult to find a better original hood
Asking 1000 for hood with scoops

Hood is in the Metro Detroit area and I am hoping not to ship

Please contact batfan AT mnsi DOT net as I do not check here regularly

thanks
Posted by: JTECDN

1971 E body front frame rails and tosion bar xmember - 01/15/18 02:21 AM

Selling a pair of E body front frame rails as well as torsion bar crossmember
These are immaculate rust-free parts removed from a 1970 E body
The front of the rails have been modified to appear the way 1971-74 rails looked with an open section behind the rad support and a turned up welding tab.
The torsion bar crossmember has also been modified to have the angled surface for the 1971 and later park brake cable as well as having the holes for the fuel lines enlarged like the later cars
The parts were immaculate pit-free examples that still had some original paint on them
After the modifications were made they were professionally e-coated

These parts are definitely correct for 1971 and 1972 and will still fit a 1970. I have read that the rails changed for 1973-74 but I do not know that to be fact

$1500 for the three pieces

The parts are in the Metro Detroit area
Please contact batfan AT mnsi DOT net as I don't check here regularly

thanks
Posted by: Jiminy cricket

Re: E Body - Parts For Sale - 1st Quarter - 01/17/18 01:41 PM

NOS 3 speed wiper switch. Was in an incorrect box. $250 shipped within the US
Posted by: smuggler

Re: Original E Body 340 Rallye Leaf Springs - 01/17/18 03:08 PM

I have an original set of rear leaf springs from a 1973 340 Rallye Challenger--very hard to find original springs these days! The springs were removed many years ago and were briefly used on 1 of my converts. The design and perch configuration of the springs match other non-hemi style HiPo E body springs. They are in excellent shape and do not suffer from spring sag at all. The part number stamped in the bottom spring is 3643594 with a 050 3 date code (and of course the Pentastar). I included a pic of the springs installed on 1 of my e body converts so you can see the stance. Finished in black phosphate.

Prefer local pick up in NC as these are expensive to ship.

$395 for the set.
Posted by: littleredcoffin

72-74 cuda grille plastic pieces $25PR - 01/17/18 03:55 PM

72-74 cuda grille plastic pieces.Use for repairing grille $20 ea or $25pr,calls only 603 209 1678.no emails...pay by us postal money order only
Posted by: littleredcoffin

70-71 eye brow trim - 01/17/18 04:02 PM

70-71 challenger rear eye brow trim.ok shape.ok for drivers or to fill in a missing piece $4pr,call only 603 209 1678,no emails.Pay by US postal money order only
Posted by: challenger6pack

Re: E Body - Parts For Sale - 1st Quarter - 01/18/18 01:47 PM

1970 Ebody bucket seats. One is from a Cuda and one is from a Challenger. I'm  going to tell you everything I  can about them so there are no surprises. The Cuda seat is very clean. Most of the springs look new. The Challenger seat back is nice. The bottom springs have a few areas that are weak. Once the upholstry is off you will be able to tell if any springs need replaced. The frames are good. All of the holes for the hog rings are good. None are rusted out. The black seat release button is loose from the attachment and needs repaired. There is some corrosion on the black part that will need sanded down. All hinge covers are included. The seat latches are there and work. The Cuda seat has the shell. The shell is worn out. These seats don't have tracks. These have been stored for more than 20 years. I will ship these in 2 boxes. The backs in one box and the bottoms in another. They are in south Florida. I'm asking $300 + actual shipping costs and will take offers. I can be reached by PM. Thanks. 


Send a message with email for pics. The file manager says I have 0 photos and they are larger than 2 kb.
Posted by: littleredcoffin

72-74 CUDA TAILLIGHT STAINLESS RINGS - 01/18/18 05:49 PM

72-74 CUDA TAILLIGHT LENSE TRIM RINGS,BOTH ARE IN GOOD SHAPE.JUST HAVE THE 2.$10PR,CALLS ONLY 603 209 1678.NO EMAILS.CALLS ONLY...PAY BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

NON RALLY GAUGE LENSE - 01/18/18 05:57 PM

70-74 NON RALLY GAUGE LENSE.GOOD SHAPE $3,CALLS ONLY 603 209 1678.NO EMAILS.PAY BY US POSTAL MANY ORDERS
Posted by: littleredcoffin

AMBER SIDEMARKER LENSE - 01/18/18 06:00 PM

AMBER SIDE MARKER LIGHT ASSEMBLY.$4,CALLS ONLY 603 209 16378.PAY BY US POSTAL MONEY ORDERS OMLY
Posted by: littleredcoffin

GAS PEDAL ASSEMBLY $7 - 01/18/18 06:02 PM

CORRECT WORKS FINE $7,CALLS ONLY 603 209 1678,EMAILS ONLY
Posted by: littleredcoffin

GLOVE BOX DOOR - 01/18/18 06:04 PM

GLOVE BOX DOOR.CLEAN,NOT RUSTY $6,CALLS ONLY 603 209 1678.NO EMAILS..PAY BY US POSTAL MONEY ORDERS
Posted by: littleredcoffin

GLOVE BOX DOOR HINGE - 01/18/18 06:05 PM

WORKS FINE..$3,CALLS ONLY 603 209 1678,NO EMAILS
Posted by: littleredcoffin

BIG BLOCK VALVE COVERS - 01/18/18 06:07 PM

BIG BLOCK VALVE COVERS.MATCHED PAIR.$25PR,CALLS ONLY 603 209 1678,NO EMAILS.PAY BY US POSTAL MONEY ORDERS
Posted by: littleredcoffin

CHALLENGER HEADLINER TEETH - 01/18/18 06:37 PM

CHALLENGER HEADLINER TEETH.HOLD HEADLINE IN PLACE ON THE LOWER SIDE IN THE REAR OF CAR.$10PR,CALLS ONLY 603 209 1678 NO EMAILS
Posted by: littleredcoffin

FENDER RE INFORCEMENT BRACKETS - 01/18/18 06:39 PM

FRONT FENDER RE INFORCEMENT BRACKETS.ATTACH TO THE FENDER,BETWEEN THE FENDER AND COWL...$5PR,CALLS ONLY 603 209 1678.NO EMAILS
Posted by: QuickBpBp

1970 Only E-body Original Painted Passenger side mirror - 01/18/18 07:21 PM

1970 only E-body Original Painted passenger side mirror. It's in Nice condition not corroded like most get. It needs the base tightened to the mirror head. Original date coded 9-DMI-9 glass is still nice with some light scratches seen upon close inspection rolling back-n-forth in the light. Would not be seen when mounted. Not a cheap aftermarket one that falls apart.

SOLD THANKS MOPARTS!

Part is located in SE PA.
Can send more pictures if interested.
Pm here on the board or e-mail bretts440"at"frontiernet.net
Thanks for free ad Moparts!
Posted by: 71redcuda

NOS HEMICUDA SHAKER EMBLEMS - 01/19/18 12:26 AM

I have one pair of original NOS Hemicuda emblems. Mint condition. Part# 3462269.

675$ including shipping. PAYPAL only.


Pm here or email to:
Nicklas-780@hotmaol.com


Thanks
Nicklas
Posted by: mopar_muscle

E body ashtray - 01/19/18 01:30 AM

71-74 console ashtray. $10 mopar_muscle76@yahoo.com
Posted by: mopar_muscle

drivers side seat track - 01/19/18 01:38 AM

Just pulled off my Challenger for a 6 way seat bracket. This seat track operates perfectly. No rust or loose parts. $100 mopar_muscle76@yahoo.com
Posted by: smuggler

Re:70 Cuda Wing Decklid Reinforcement Brackets - 01/19/18 12:22 PM

$29 shipped

Thanks!
Posted by: B5EBody

1970-71 Challenger Locking Gap Cap Fix - 01/20/18 11:42 AM

Return full locking functionality to your Challenger locking cap! If your Challenger locking gas cap doesn’t lock, this is likely the cause.
This is the round locking disk that is often broken on the rare and desirable Challenger only locking caps from 1970-71. The originals were pot metal and after thirty years of use, the locking tabs have broken off. These replacements are made of solid aluminum and have a thicker cross section and a radius on the tab. Comes with easy to follow installation instructions. Gas cap not included.

Shipping from Bloomington, IL
Price: $25 includes shipping
Payment Methods Accepted: Paypal preferred, Cashier’s Check, Money Order

Email: DRML440@GMAIL.COM
Posted by: loco340cuda

Misc. 1970 Cuda Parts For Sale - 01/20/18 04:08 PM

I was cleaning out my garage this weekend and found a bunch of Cuda parts that I no longer have any use for.

Misc .1970 Cuda Parts (prices do not include shipping)

" Hood Pins (used, just the posts and nuts, no hood clips) $20 OBO
" Rallye dash light bar wiring harness (used). $20 OBO (SOLD)
" Windshield Washer Hood Sprayer tubing and fittings (used) $100 OBO
" Front bucket seat seatbelts (used) $150 OBO
" Radiator support to K-member bracket (used) $75 OBO (SOLD)
" Rear brake hose tee block (used) $25 OBO
" Master cylinder bracket for manual brakes (used, w/bolts) $30 OBO
" Misc gasket/seals (firewall, heater box, side marker and parking lights) all gasket/seals are new and sold as a lot) $50 OBO
" REM Black perforated headliner (new) $70 OBO
" Horns (used, need to be rebuilt) $50 OBO
" Passenger side front splash shield (used) $60 OBO
" Master Cylinder for manual brakes (new, bought years ago from Master Power Brakes) $50 OBO
" Adjustable master cylinder push rod (new, bought years ago from Master Power Brakes) $50. OBO
“ Rear light wiring harness (used) $20 OBO. (SOLD)

PM me here on the site or email me at davloc123@yahoo.com for pictures and any questions that you have.

Thanks,

Dave
Posted by: blewbyu

Drive shafts for sale - 01/20/18 08:52 PM

I have measured these as close as possible. Could be off an 1/8" or so:

44 7/8" No slip yoke 7290 on each end, May fit MT 727 AT with Dana in a
1970-71 Challenger or Coronet $250.00

45" Slip yoke for MT AT 7290 yokes on each end, May fit 727 AT 8 3/4 in
a 70-73 Duster Dart with 340 $125.00 "Does have one small ding"

45 1/2" Slip yoke for MT 727 AT 7290 yokes on each end, May fit AT 8 1/4
in a 74 Duster with 360.
May also fit MT AT 8 3/4 in a 70 Challenger 340 car $125.00

48" Slip yoke for MT 727 AT 7260 slip yoke side 7290 diff side, May fit
727 AT 8 3/4 in a 70 Dart $150.00

48" Slip yoke MT 727 AT 7260 yokes on each end, May fit AT 8 3/4 in a 70
Dart $125.00

48" Slip yoke MT 727 AT 7290 yokes on each end, May fit 727 AT 8 3/4 in
a 70 Dart $175.00

48 1/4" slip yoke 904 AT 7260 on each end $100.00

48 1/2" Slip yoke 904 AT 7260 on each end $100.00

48 1/2" Slip yoke MT 727 AT 7260 on each end $125.00

54 1/2" Slip yoke 904 AT 7260 on each end $100.00

55 3/4 Slip yoke MT 727 AT 7290 on each end $125.00

1965 Valiant Trunion Shaft 904 with 7 1/4" Rear End $75.00

All are plus shipping

blewbyu2bad@aol.com
Posted by: mopar_muscle

383 440 exhaust manifolds - 01/22/18 12:31 AM

exhaust manifolds...

the dates are :


11-2-72

#3751068-2D


&


7-28-70

#2899879

$300 for the pair. mopar_muscle76@yahoo.com
Posted by: kentj340

E-Body Pure Zinc Interleaves for Leaf Spring Rebuild - 01/22/18 02:22 AM

E-Body Pure Zinc Interleaves for Leaf Spring Rebuild

All interleaves are made from 99.5+% pure soft zinc sheet, same as the originals.

#E4 – Exact reproduction of the 10 pure zinc interleaves that came in the 024/034 factory springs for 426, 440 and other engines with axle packages, $77.30.

#TA – Exact reproduction of the 8 pure zinc interleaves that came in the factory springs for AAR/TA, $61.85.

#E8 – Car set of 8 pure zinc interleaves for springs with 4-1/2 steel leaves each side, $61.85.

#EC – Car set of pure zinc interleaves custom made to exactly reproduce your old zinc using information you provide, $77.30 for 10, $61.85 for 8.

#XL – One pure zinc interleaf, long, $7.73. Order two for springs with one extra leaf each side.

Add shipping by USPS Priority mail $13.65 per car set.

Contact kjohnst at postal dot net.
Posted by: moparply

Re: E Body - Parts For Sale - 1st Quarter - 01/22/18 02:13 PM

2 Original Challenger Cuda 15" x 6 1/2" trim rings, real Chrysler trim rings, $40 pair

Original Challenger Cuda standard dash gauge assembly, $50


Email Kenei@comcast.net
Posted by: sixpackman

Re: E Body - Parts For Sale - 1st Quarter - 01/22/18 07:33 PM

Nice 3-speed wiper for 72 E-body. Good drivers condition.
125.00
Plus shipping
Posted by: 6PAX

Rimblow steering wheel - 01/23/18 12:59 PM

For sale is a pretty nice Rim Blow steering wheel I recently removed from my car. The wood part still has some of the texture to it. There are no cracks on the wood part of the rim just a typical scratch here and there. There are two cracks on the black backside roughly at 4 and 8 o'clock. The center cap is for Dodge Challengers and is very nice. The horn switch works. Spokes are pretty nice on the front with a little rust on the backsides. I can email more pictures with close-ups. Asking $500 plus shipping.

gt340 at yahoo.com
Posted by: moparply

Re: E Body - Parts For Sale - 1st Quarter - 01/23/18 01:04 PM

NOS Factory Chrysler rear shocks, both are part number 3400620, both are 1969 dated, in their original box's, $200 pr

Email Kenei@comcast.net
Posted by: granny53

Re: E Body - Parts For Sale - 1st Quarter - 01/23/18 02:53 PM

6 PACK CARBS & PARTS NUMBERS 4375-4393-4671-4374 NEW JERSEY PTRTESTER@YAHOO.COM 201-618-2758 $950. PLUS SHIPPING $50. CARBS ARE REBUILDABLE NO CRACKS OR BROKEN THREADS WITH NEW DIAFRAMES
Posted by: Joesixpack

Re: E Body - Parts For Sale - 1st Quarter - 01/24/18 01:04 PM

1970-1974 CHALLENGER&CUDA
TRANSMISSION CROSSMEMBER WITH MOUNT TO TRANS BOLTS,SPACERS,LONG BOLT,WASHER&NUT$30 plus shipping
cowgerwilliam035@gmail.com
from AZ
Posted by: Joesixpack

Re: E Body - Parts For Sale - 1st Quarter - 01/24/18 01:08 PM

THESE ARE THE BOLTS,NUTS AND WASHERS THAT ATTACH YOUR ENGINE MOUNTING BRACKETS(MOTOR MOUNTS) TO THE EARS OF YOUR ENGINE BLOCK

THEY INCLUDE 6 NEW GRADE 8 7/16 -20 FINE THREAD (LIKE FACTORY)ATTACHING BOLTS,6 NEW GRADE 8 LOCKING NUTS, 6 NEW GRADE 5 WASHERS

ARE BRAND NEW! .

THEY WILL FIT ALL V8 SMALL BLOCK ENGINES, 318-340-360 AND ALL 1970-1974 DODGE CHALLENGERS, PLYMOUTH BARRACUDAS $15
add 8.00 priority mail in USA
cowgerwilliam035@gmail.com
Posted by: Joesixpack

Re: E Body - Parts For Sale - 1st Quarter - 01/24/18 01:10 PM

1970-1974 E-BODY WITH
383-400-440 ENGINES.
THESE BOLT TO THE EARS OF YOUR ENGINE BLOCK AND ATTACH THE STEEL ENGINE MOUNTING BRACKETS(MOTOR MOUNTS)
5 BRAND NEW GRADE 8 7/16S FINE THREAD BOLTS
1 USED FACTORY LONG BOLT(GOES THRU THE DRIVERS SIDE WELDED TUBE IN THE MIDDLE OF THE MOUNT)FINE THREAD
6 NEW GRADE 8 LOCK NUTS
6 NEW WASHERS
MOST OF THE USED MOUNTS YOU SEE ARE MISSING THESE$15
8.00 PRIORITY MAIL MAILING COST IN USA
cowgerwilliam035@gmail.com is my paypal address
Posted by: moparply

Re: E Body - Parts For Sale - 1st Quarter - 01/24/18 01:14 PM

NOS General Electric headlights, GE 6014, both are tested and work great. $50 pr

NOS General Electric headlights, GE 6012, both are tested and work great, $250 pr

These are the larger 7" headlights.


Email Kenei@comcast.net
Posted by: rarefish

1970 Cuda Road Lamp Bracket - 01/25/18 03:39 PM

Selling this original factory 1970 Cuda Road Lamp Bracket.
It is the left side one. I do not have the other side...
It had been glass beaded and repainted.

......SOLD......SOLD......


Payment by a US Postal Money Order or by Paypal.

PM me here if interested or with any questions.
Posted by: moparply

Re: 1970 Cuda Road Lamp Bracket - 01/26/18 01:08 PM

NOS 1970 Cuda Road Lamp bracket, passenger side, original factory paint, zero pitting or damage, excellent condition, $80

Original Challenger Cuda standard gauge assembly, nice condition, $50

NOS Plymouth Cuda postcard, printed in 1970, excellent condition, $5


Email Kenei@comcast.net
Posted by: moparply

Re: E Body - Parts For Sale - 1st Quarter - 01/26/18 01:18 PM

NOS 1970 Dodge Challenger Standard Dash Fuel Gauge, mint condition, $125

Email Kenei@comcast.net
Posted by: moparply

Re: E Body - Parts For Sale - 1st Quarter - 01/26/18 01:25 PM

Original Cuda Challenger factory burnt orange dash panel, mint condition, $125

Email Kenei@comcast.net
Posted by: moparply

Re: E Body - Parts For Sale - 1st Quarter - 01/26/18 01:34 PM

NOS 1970-74 Challenger Cuda passenger side muffler assembly, mint condition, $250

Email Kenei@comcast.net
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/27/18 01:29 PM

One 15X7 steel wheel correct for 1970 and 1971, part number 2944450, date code 10-14-1969 $1000.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/27/18 01:37 PM

426 HEMI 727 torqueflite front drum, rear drum and brand new band, all parts are in excellent condition $750.00 for everything (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/27/18 01:44 PM

Two 15X7 Ralley wheels correct for 1970 and 1971, part number 2944390, both wheels have the same date code 5-1-1970 $800.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/27/18 02:24 PM

NOS in the box 1969 and up three prong neutral safety switch $60.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/27/18 07:19 PM

Original 1970 440 SIX PACK 4-speed dual point distributor, The shaft is tight but spins freely, I have tested the vacuum advance, it pulls, I have installed a new lead wire, part #3438314, date code 44-9 $750.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/27/18 08:13 PM

Late 1969, 1970 and 1971 426 HEMI 2X4 inline intake manifold, as you can see in the picture it has had a repair on the bottom side, other than that it is in excellent condition $500.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/27/18 09:01 PM

1970 "B" and "E" body NOS upper radiator hose, not reproduction for 383, 440 and 440 SIX PACK cars with 22 inch radiator, part #3462114 $275.00 (708)288-2879 Scott
Posted by: Davews

Re: E Body - Parts For Sale - 1st Quarter - 01/27/18 09:10 PM

1970/1971 Hi P.o. exhaust manifold #2951865 hi temp painted and clean. Pics can be e mailed or texted on request. $100 plus shipping. Thanks, Dave P/M me here
Posted by: 69B71E10LC

70-74 E-body New and used wiper arm - 01/27/18 09:23 PM

I have 2 left wiper arms for an E-body asking $100 for the New Anco one and $45 for the used original one. Plus shipping. Call 586-530-8529, Please no calls after 9 pm. Thanks Andy

Thanks Moparts
Posted by: 69B71E10LC

Misc E-body parts - 01/27/18 09:34 PM

I have a few parts left over for an E-body: I can take closer pics of any part. Call 586-530-8529, Please no calls after 9 pm. Thanks Andy

25 NOS wheel lip molding screws $20
NOS steering coupler kit $15
New door handles driver quality $100 pr
2 sets of New metal floor plugs $5 pr
2 New orange shock plugs $5 pr
1 set of OE restored, plated washer nozzles $25
2 used hood wedges, work as they should $8 pr

All prices plus shipping.
Thanks Moparts
Posted by: 69B71E10LC

New oil filter adapter bolt - 01/27/18 09:39 PM

I have a New 90 degree oil filter adapter bolt. Asking $20 shipped in the lower 48. Call 586-530-8529, Please no calls after 9 pm, Thanks Andy

Thanks Moparts
Posted by: dsd70bee

Re: New oil filter adapter bolt - 01/27/18 10:10 PM

1970 and 1971 440 SIX PACK base plate and lid $550.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/27/18 10:19 PM

1969, 1970 and 1971 NOS 426 HEMI water pump pulley, never been installed on a car, part #2946716 $350.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/27/18 10:25 PM

1969, 1970 and 1971 426 HEMI oval air filter NOS in the box, this is the real deal, never installed on a car $650.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/27/18 10:49 PM

1970 and 1971 cast iron 440 SIX PACK intake manifold, excellent used condition $575.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/27/18 11:08 PM

1970 426 HEMI 4-speed prestolite dual point distributor, part #2875988 IBS 4017 BS date code 47-2, This was an NOS distributor that was sold over the counter, I have tested the vacuum advance, it pulls, excellent used condition $950.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/27/18 11:29 PM

1970 440 HP block and main caps .030, casting date 1-26-70, there is a small chip in the block on the pan rail by a bolt hole area, it will still hold a bolt $850.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/27/18 11:56 PM

1971 to 1974 B-body and 1970 to 1974 E-body NOS shifter boot bezel, part #2996415 $150.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 12:09 AM

One pair of 1971 426 HEMI 4-speed carbs, front carb ML9 4742 rear carb ML9 4745, excellent cores to restore $5500.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 12:15 AM

NOS 1970 and 1971 E-body and 1971 B-body drivers side motor mount insulator not repro, never been installed on a car, part #2951599 $475.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 12:20 AM

NOS 1971 426 HEMI "B" and "E" body oval air cleaner base plate, never been installed on a car $1850.00 (708)288-2879 Scott
Posted by: dart4forte

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 12:24 AM

*****************************SOLD***************************

I have a set of restored 1970 E body belts. These belts have been repaired, cleaned, webbing replaced, and hardware polished. These belts are "American Safety" which would be correct for a California build car. These belts come with date tags.

$400 including shipping
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 12:25 AM

NOS 1970 and 1971 Dodge 426 HEMI non shaker hood emblems, these are the real deal, correct brushed finish, not chrome $250.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 01:13 AM

1972 and 1973 318 and 340 Aluminum 10 1/2 inch 4-speed bellhousing, casting #3515734, excellent used condition, not cracked, I have ran a tap down every threaded hole, none are stripped, included is the clutch fork pivoting bracket $200.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 01:19 AM

1970 to 1972 E-body and 1971 and 1972 B-body shift linkage for Pistol Grip shifters, excellent used condition $150.00 (708)288-2879
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 01:25 AM

1972, 1973 and 1974 "B" and "E" body 2 speed wiper motor NOS in the box, part #3431533, never been installed on a car $250.00 (708)288-2879 Scott
Posted by: cl440

Brake Hoses - 01/28/18 12:09 PM

Brand new been sitting on my shelf for years! Wagner brake hoses.

Looked them up on Rock Auto and they get $18.00 each.

$30.00 for both and I will pay shipping in the continental U.S.

pm me or chucklewis440@gmail.com
Posted by: dsd70bee

Re: Brake Hoses - 01/28/18 06:15 PM

1970 340 4-speed Carter AVS carb core to restore, #4933, date code K9, it has it's original idle stop solenoid and it's original carb tag $350.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 06:38 PM

1969, 1970 and 1971 small block 10 1/2 inch bellhousing, nice used condition, not cracked, cast #2892482 $200.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 06:51 PM

One pair of Good Year E60-15 RWL polyglas GT tires, these are original not reproduction, they are in excellent used condition, no cracking on the side walls, the tread is perfect, on a scale of 1 to 10 I would call these a 9 $1500.00 for the pair, the aluminum slot mags are a freebe (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 07:02 PM

1970 Dodge T/A Challenger hood, nice used original not reproduction $2250.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 07:05 PM

1970 to 1974 Dodge Challenger flip out gas cap and trim ring, the gas cap is NOS and has never been installed on a car, the trim ring is nice used $400.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 07:07 PM

1970 E-body Chrome remote drivers door mirror NOS in the box, never been installed on a car, part #3508987 $450.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 07:11 PM

One pair of NOS 1970 E-body mirrors in primer for cars that have painted mirrors, never been installed on a car $900.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 07:15 PM

One pair of used 1971 Plymouth Cuda and Barracuda front turn signal assemblies, these are what I would call cores to restore, as you can see in the pictures one of the ends is missing on one of the pig tails $250.00 for everything (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 09:33 PM

1970 E-body Dodge and Plymouth 340 and 340 SIX PACK 26 inch radiator, part #2998974, I have not had this radiator tested, selling as is $450.00 (708)288-2879
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 09:36 PM

1970 and 1971 Dodge Challenger passenger side front fender not rusty $650.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 09:41 PM

Original Edelbrock 340 SIX PACK intake manifold from a Dodge T/A Challenger or an AAR Cuda, nice used condition $950.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 09:44 PM

One pair of brand new in the box BE&A 1970 Plymouth Cuda and Barracuda reproduction tail lite chrome trim, never been installed on a car $200.00 (708)288-2879 Sco
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 09:56 PM

1970 and early 1971 E-body Hurst Pistol Grip shifter box excellent used condition $250.00 (708) 288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 09:59 PM

1970 and 1971 Cuda Dana 60 drive shaft $1000.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 10:02 PM

1970 to 1974 E-body rear sway bar $125.00 (708)288-2879 Scott
Posted by: QuickBpBp

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 10:05 PM

Nos 1970 Challenger Glove box and Deck lid lock set. Probably fits 71-up also but check for yourself. It is part #3419955 chrome is perfect on both. dealer sticker shows Shipped in '87. Perfect for a serious restoration.

SOLD THANKS MOPARTS

Parts are located in SE PA.
Can send more pictures if interested.
Pm here on the board or e-mail bretts440@frontiernet.net
Thanks for free ad Moparts!
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 10:22 PM

One pair of NOS 1970 Dodge Challenger roof rear frame connectors that tie the roof frame to the quarter panels, these are not being reproduced by anyone, part#2963700 and 2963701 $575.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/28/18 10:23 PM

1970 E-body clutch safety switch for cars with manual transmission, part #2947858, as you can see in the pictures the wiring harness is missing, the spring inside is not broken, I am selling as a core to restore $150.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/29/18 01:23 AM

1971 to 1974 "B" and "E" body NOS gas pedal with dress up, part #3577526 $150.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/29/18 01:32 AM

One pair of nice used original CUDA440-6 emblems for shaker hood, correct 3 pin emblems not 2 pin, $350.00 for the pair (708)288-2879 Scott
Posted by: QuickBpBp

Nos 70-1 B and E body 440 4 Barrel Idle Solenoid - 01/30/18 01:03 PM

Nos Mopar Idle solenoid assembly with bracket and wiring. This fits all 71 GTX and 71 Charger R/T models. The Solenoid is DR1114447 which is correct for 71 440 4 barrel but evidence shows from internet could also be correct for 1970 Models also you be the judge(see below). These parts are very hard to find and only original once. If your doing a serious 1970-71 440 B-body or E-body restoration than this is for you. You could not buy a used assembly and have it restored for my price. You would still have to find an Nos wire and a bracket. Hard to find and none of these parts are reproduced and probably never will be. I only have this one.

SOLD

Parts are located in SE PA.
Can send more pictures if interested.
Pm here on the board or e-mail bretts440@frontiernet.net
Thanks for free ad Moparts!


From information below this can be correct for 1970 Cuda Challenger GTX Charger R/T Coronet R/T SuperBird 71 Charger R/T Cuda Gtx. You know what it is so please be sure it's correct for your application.

Posted FROM MOPARTS:
Stamping# DR1114442 or DR1114447 (Evidence of either number being factory original)
Part# 3438303 (Carter AVS)
1970 440 4738S
1971 440 4968S
Hex head with cap, no integral bracket
Posted by: challenger6pack

Re: E Body - Parts For Sale - 1st Quarter - 01/30/18 09:25 PM

1970 Cuda Challenger console. It has a small crack by the shifter. The lid was originally burnt orange. It has separated the way these do. There are a few holes drilled in the top where it goes up under the dash. It is hard to see them when it is mounted. The plate is in average condition for its age. I'm asking $100 + actual shipping costs from south Florida. Add 3% for Paypal. I can be reached by PM. Thanks.
Posted by: challenger6pack

Re: E Body - Parts For Sale - 1st Quarter - 01/30/18 09:31 PM

(SOLD)1970-1974 Cuda Challenger A/C Under Dash Trim.Hard to find part in good condition. There are two scratches and one crack. Both are nearly impossible to see when it is mounted. All the screw holes are good and not cracked. It is not powdery or brittle. It has been in dry, cool storage for around 25 years. I'm asking $100 + actual shipping costs from south Florida. I can be reached by PM. Thanks.
Posted by: challenger6pack

Re: E Body - Parts For Sale - 1st Quarter - 01/30/18 09:41 PM

1972 1973 1974 Challenger fenders. I have 2 unneeded fenders. One needs some bodywork. I'm asking $100 for it. The other has a dime size rust spot and some surface rust. I'm asking $200 for it. It is nice fender. Both are drivers side fenders. They are located in south Florida. They are also a local pick up only. I can be reached by PM.Thanks.
Posted by: challenger6pack

Re: E Body - Parts For Sale - 1st Quarter - 01/30/18 09:45 PM

1971-1974 Cuda Challenger Dash Cap. This is a new unopened dash cap from dash top. It had a bend in it when it came here new. I never worried about it since the plan was to dye it blue. The bend left a small white mark in the cap on the edge near the radio. I'm asking $50. Shipping costs from south Florida are crazy expensive. This is a local pick up only. I can be reached by PM. Thanks.
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/31/18 12:18 AM

One pair of 1970 and 1971 "hemicuda" emblems, NOS never been installed on a car, $250.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/31/18 12:33 AM

One pair of 1970 to 1974 Dodge Challenger front turn signal assemblies in excellent used condition, no cracks or scratches in the lenses $200.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 01/31/18 02:11 AM

1970 and 1971 440 SIX PACK harmonic balancer nice used condition $250.00 (708)288-2879 Scott
Posted by: rocksmopar

Reproduction AAR hood - 01/31/18 09:17 AM

I have a reproduction AAR hood I am selling, It has AAR stamped on the underside. It bolts to the hood hinges, not a lift-off hood.
It's in very good condition with the shipping tabs still in the opening..

$650.00 obo, Make me an offer

PM me for a picture or send me a number and I will call you.

Thanks. [img]https://lh3.googleusercontent.com/Zd5smV...TE=w240-h320-no[/img] [img]https://lh3.googleusercontent.com/9zSonR...rg=w240-h320-no[/img] [img:center]https://photos.app.goo.gl/osWA5TaAunvldZOZ2[/img]
Posted by: gdmusclecar

70 E-BODY 4SPD PISTOL GRIP SHIFTER - 01/31/18 11:07 AM

70 E-BODY 4SPD PISTOL GRIP SHIFTER,REVERSE ROD NEEDS REPAIR,SHIFTER BOX HAS PITTING,CHROME ON HANDLE LOOKS GOOD. $469


*WE CAN SHIP*

E-MAIL: GDMUSCLECARPARTS@YAHOO.COM

ORANGE PARK,FL.
Posted by: gdmusclecar

70 E-BODY AUTOMATIC CONSOLE - 01/31/18 11:16 AM

70 E-BODY AUTOMATIC CONSOLE $200

*WE CAN SHIP*

E-MAIL: GDMUSCLECARPARTS@YAHOO.COM

ORANGE PARK,FL.
Posted by: gdmusclecar

440 SIX PACK PISTONS & RODS - 01/31/18 11:19 AM

1-SET OF 440 SIX PACK PISTONS THEY ARE 0.30 OVER TRW NEW WITH SHOP WEAR,THEY HAVE NEVER BEEN INSTALLED IN A BLOCK,THE SIX PACK RODS ARE USED.

$599.99

*WE CAN SHIP*

E-MAIL: GDMUSCLECARPARTS@YAHOO.COM

ORANGE PARK,FL.
Posted by: BigMoneyLewis

stereo cassette lead jumper plug - 01/31/18 02:03 PM

SOLD SOLD SOLD


This is the small black "jumper" plug that goes in the end of the cassette lead and allows you to play the radio without being plugged in to the cassette player. The radio wont play without it .
$ 20 , free shipping. Will ship within the lower 48 states only .

gregward@mchsi.com
Posted by: arizonaparts

NOS 6 Pack Parts 1970-71 - 02/01/18 12:01 AM

NOS 6 Pack Parts 1970-71



NOS 1970-71 Air Cleaner To Carb Gasket #3462205



12.00 each plus shipping



also have these:



173182 CARB FUEL LINE TEE have 10 9.00 each

3418346 REAR CARB FUEL LINE have 2 20.00 each

3418347 CENTER,FRONT CARB FUEL LINE have 1 20.00 each



www.arizonaparts.com



mkolner14@hotmail.com



480 966 6683





Posted by: dsd70bee

Re: stereo cassette lead jumper plug - 02/01/18 05:00 AM

1971 only "B" and "E" body slap stick "T" shifter handle, NOS, never been installed on a car $250.00 (708)288-2879 Scott
Posted by: TB3CUDA

Re: E Body - Parts For Sale - 1st Quarter - 02/03/18 07:57 AM

cuda challenger parts
set of bucket eats from a 71 challenger $350
70-71 cuda challenger wood grain wheel has custom woodgrain done ,looks excellent has center and horn button $150 pm if interested,located sw michigan seats must be picked up
Posted by: TB3CUDA

Re: E Body - Parts For Sale - 1st Quarter - 02/03/18 08:00 AM

k-frame excellent condition removed from a 71 challenger $125obo must be picked up sw michigan pm if interested
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 02/03/18 09:13 PM

One pair of 1970 to 1974 Dodge Challenger fender emblems, NOS in the wrapper, never been out of the wrapper, part #3444938 $150.00 for the pair (708)288-2879 Scott
Posted by: kdsmith07

cuda 6 pack hood 300.00 - 02/04/18 02:43 AM

this was mounted at one point but never really left the shop.it has no damage but has hood pin holes.this uses hood hinges.the finish looks uneven from sitting around.has no cracks,breaks or missing pieces.asking 300.00 and pick up only in ga.30052.pm me or call or text 678-542-9138 if interested.thanks moparts
Posted by: mosweethemi

Re: Challenger parts - 02/04/18 06:33 AM

Hello I have some parts for sale as is .. AMD NEW HOOD , AMD LEFT FRONT FENDER ,NEW REAR FLOOR PANS , HIGH BACK BUCKET SEATS ,REAR SEAT, SEAT BELTS , ALL TINTED GLASS ,DASH ,FOUR DOORS, K FRAME WITH DISK BRAKES, READ END WITH A 489 CASE DRUM TO DRUM.RUST FREE TRUNK LID CALL OR E-MAIL FOR MORE INFO (MOSWEETHEMI@YAHOO.COM) 540-337-4310 ALSO ON MOPARTS.COM PM ME O.B.O NEW HOOD $500.00 NEW FENDER $350.00 NEW REAR FLOOR PANS $150.00 FRONT AND REAR SEATS $550.00 SEAT BELTS $300.00 GLASS $500.00 DOORS $300.00 EA K FRAME WITH DISK BRAKES $500.00 REAR END DRUN TO DRUM 489 CASE $500.00 DASH $350.00 RUST FREE TRUNK LID $275.00
Posted by: mccannix

NOS Cuda Challenger rear defog assembly 3441540 - 02/04/18 07:43 AM

NOS in the box rear defog assembly for 1970 Cuda and Challenger,
part number 3441540.
This includes everything shown in the pictures right down to the foam seal..
Is complete as packaged for Chrysler with no parts missing.
Cant find all the intricate little parts to restore/replace yours for this price.
Will fit 71-74 as well.
SOLD ! ....Thanks Moparts
Call Terry 613-382-3550 or email
Posted by: mccannix

NOS Challenger convertible top 1/4 belt molding 3419800 - 02/04/18 07:46 AM

This molding is NOS in the original Chrysler packaging and in flawless condition.
Part number 3419800 top left 1/4 belt molding this doesn't get any better for that top drawer Challenger convertible restoration.
$350.00 + actual shipping from 13640 NY.
Call Terry 613-382-3550 or email
Posted by: mccannix

NOS Cuda Challenger power steering hose 2891371 - 02/04/18 07:51 AM

NOS power steering hose for small block E-body part number 2891371.
Application checks to 1973 models but will work in other years.
has minor oxidation on fitting end but is NOS.
Terry ....SOLD !! ....Thanks Moparts
Posted by: mccannix

NOS Cuda Challenger cassette front chrome face bar - 02/04/18 07:57 AM

Almost always pitted or scratched this is NOS mint.
3 shown to see all the angles but you are buying only one.
$60.00 shipped to your door....never know when you may need one.
Call Terry 613-382-3550 or email
Posted by: mccannix

1970 Challenger only lower heater bezel - 02/04/18 08:03 AM

Nice clean, no imperfections molded in original black for 1970 Challenger only.
$110.00 for a repro plus shipping.
$110.00 gets you this original with pentastar and numbers molded shipped to your door.
Have one black and one in green
Call Terry 613-382-3550 or email.
Posted by: mccannix

NOS 1970 Cuda Challenger AM 8 track channel selector knob - 02/04/18 08:09 AM

I have several of these from a Chrysler radio warehouse inventory.
These are NOS and commonly missing on your AM 8 track radio.
Not near as many left in the picture from when I first obtained them.
$30.00 shipped to your door....never know when you'll need one.
Call Terry 613-382-3550 or email
Posted by: mccannix

NOS Automatic 727 trans rod return spring 2947637 - 02/04/18 08:20 AM

NOS automatic trans return spring part number 2946637, factory original NOS.
Not all glossy green like the repros selling for 3X the price I want.
36 coils, correct for all engine trans combos 1966-72.
$5.00 each shipped to your door...2/$8.00...3/$10.00...
Call Terry 613-382-3550 or email
Posted by: mccannix

Factory cassette player case Cuda Challenger - 02/04/18 08:23 AM

This is an original piece, sometimes missing when you find these players at a swap meet, etc.
Perfect condition, correct for B and C as well.
$60.00 shipped to your door
Call Terry 613-382-3550 or email
Posted by: mccannix

NOS Cuda Challenger side rad supports 22" 3443306-7 - 02/04/18 08:26 AM

Chrysler part number 3443306-7 for Challenger, Cuda , also 71-2 B-body cars with 22 inch rad opening.
You'll never see these in reproduction.
Get them for that upcoming project... $$175.00 pair shipped to your door.
Call Terry 613-382-3550 or email
Posted by: mccannix

NOS Cuda Challenger fender top signal lights - 02/04/18 08:31 AM

application is for 1973-4 E-body ( correct also for A and B-body 1972 and up ).
These are in original NOS unused condition and include the mounting screws, part numbered wiring, flawless chrome and lenses.
Part number 3588746....$80.00 pr shipped to your door.
Call Terry 613-382-3550 or email
Posted by: mccannix

NOS shaker Cuda Challenger 4 bbl feet brackets - 02/04/18 09:15 AM

Found NOS in the early 80's in inventory from Fram who made all the shaker components for Chrysler Corp.
Correct 4 point chamfered nut projection welded unlike some repros easily identifiable tack welding as shown in comparison on left in last picture.
Never know when you'll find a 340-4 bbl baseplate missing these.
$60.00 pr shipping included in the USA
Call Terry 613-382-3550 or email
Posted by: mccannix

NOS woodgrain rallye dash panel Cuda Challenger - 02/04/18 11:15 AM

This NOS, never installed for 1972-74 Cuda or Challenger rallye dash.
Has a slight bo-bo as the grandkids would say on one end.
Can be finessed I'm sure to perfection.
In the box and less than half the price of PCG's reproduction $135.00 shipped in the USA
Call Terry 613-382-3550 or email
Posted by: mccannix

NOS woodgrain rallye dash panel Cuda Challenger - 02/04/18 11:17 AM

More pictures plus the bumped corner area
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 02/04/18 11:53 AM

New Vacuum Advance Units!!


Its Hard Enough To Locate An Original Distributor For Your Car, But Even Harder To Find A Working Vacuum Advance Unit.
We Now Offer These 3 Types Of Advances For Both Big Blocks And Small Blocks
(Except 70-71 Big Blocks W/Retard Solenoid).

1962 Through 1969 Dual Points $85,
1970-1971 340 Dual Points $100,
1970-1971 440-Pack and 426 Hemi Dual Points $110,
For All 1962 And Newer Single Point And Electronic $45.

tonysparts.com

302-398-0821,

Tonys Parts

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 02/04/18 11:57 AM

4-Speed Parts Blowout Sale!!

Shift Rod Sets $120,

Shift Rod Levers/Tab Sets $40,

Shifter Mounting Plates $45,

2-Stud 4-Speed Pedal Bracket $15,

Pedal To Z-Bar Rods $40,

Throwout Forks $40-$45,

Z-Bars $45,

Z-Bar Frame Bracket $35,

E-Body + 71-74 B-Body 4-Speed Pedals $265,

Smallblock Bellhousings $150,

Bellhousing Inspection Covers $65-$95,

New 4-speed humps $130,

tonysparts.com

302-398-0821,

Tonys Parts

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 02/04/18 12:26 PM

All 426-Hemi Performance Parts:

1967 Super Stock Carbs, 4345 E6, And 4346 E6, Off Of Dick Landy Engine $1995pr

MP P4120711 Keith Black Aluminum Heads With “D” Exhaust Ports $1750pr.

MP Cast Aluminum Black Wrinkle Valve Covers, Say “Mopar Hemi” $450pr,

Weiand #7510 Blower Intake Manifold $495,

Hillborn Intake, Injectors, Stacks, Lines And Weiand Timing Cover With Pump $1895,

Mechanical Roller Cam (Reground), Lifters, Pushrods, Valve Springs And Bronze Distributor Gear. “286-1 295-5 R6 E 933256 Scribed On Front, 669476 92f1b On The Rear Of The Cam Is Stamped” $395

Mechanical Roller Cam + Lifters, #S On End Of Cam: 33248, 34448, 9784, 620103. On Shaft: Lm009, 27031 $250,

Keith Black Aluminum Marine Exhaust manifolds $195pr,

tonysparts.com

302-398-0821,

Tonys Parts

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 1st Quarter - 02/04/18 12:28 PM

! All Good Parts:

69-71 440 6-Pack Carburetors $325+Up,

Big Block Long Ram Intake Manifolds $845pr,

440 Edelbrock STR Intake With Crossram Or 6-Pack Top $995,

Nos 340 T/A #3438523 Dual Point Distributor $675,

69-71 440 6-Pack And 70-71 Hemi Dual Point Distributors $545-$695,

tonysparts.com

302-398-0821,

Tonys Parts

Harrington Delaware 19952
Posted by: Mr T2U

Re: E Body - Parts For Sale - 1st Quarter - 02/04/18 12:42 PM

70-74 cuda stainless trim reveal moldings.

i have a RESTORED SET of rear glass reveal moldings.

$250 shipped in the lower 48 states.

also have restored 70 lower windshield molding. this has the extra hole and specially shaped wiper rests found on 70 cars. will bolt on all year cars. challengers are the same part. $75 PICKED UP in the 53146 zip code. this item is easily damaged and uneconomical to ship.

i also have a RESTORED drivers side 70 convertible top windshield molding. it has the square opening for 70 cars, 71 has a smaller hole and screw holes for the top pin guides.
also included in sale is a roughed out passenger side molding. the dents are roughed out and need some time to finish repair the dens when metal finishing. then buffed out.
$400 shipped in the lower 48 states.


i can send more pics if needed. will need a email address to send them to.



pm me here or email me mrt2you@msn.com
Posted by: bremotorsports

Re: E Body - Parts For Sale - 1st Quarter - 02/04/18 04:37 PM

NOS 2444442 Starter Relay

Great date code of 51 9 (51st week of 1969) for mid year 1970 Mopars.

Fits manual and automatic.

85.00 plus shipping.

Bill Rolik

201-394-5533 Cellular

bremotorsports@verizon.net

PayPal preferred.
Posted by: moparphilll

K-member 1970 - 02/04/18 05:24 PM

1970 K-member out of 6 Cyl. Convertible Barracuda $75 plus shipping moparphilll@aol.com
Posted by: 72ls5fla

OEM and Repo Parts FS: Post-1 - 02/04/18 05:26 PM

hey

I have the following:


2. 71 bendix power brake booster. Restored by Booster Dewey - 100% working order. $150 plus shipping

3. SE stainless trim - both upper fenders, back of hood, upper doors, and upper quarter (coupe). I would rate all pieces around a 7 of 10. will need to be polished and some light scratches removed and a ding or two.
$450 plus shipping

4. Left and Right RT grill head lamp buckets (OEM -NOT- Repro). really decent pieces. not smacked around or bent up. could use a repaint to make fresh, but still shines.
$200 plus shipping (pair)

5. Used set of 1970 hood hinges - will need to be sent off for restoration. NOT bent or damaged.
$100 plus shipping

6. licensed repro deck wing (1970 Challenger) - has all gaskets, screws, bolts, mounting brackets etc .. very nice
$300 + shipping


8. Rimblow New Reproduction center cap.
$75 + shipping

9. OEM challenger shaker ring. Needs studs. has pt# etc on backside.
$300 + shipping.

10. set of 14" rally wheels/OEM trim rings with repro goodyear tires
ALL four rims have same part# 3580058 and M1 7 16 date codes around valve
stems.
$1,100.00 + shipping

can send additional pictures to those who are interested.

My email address: bill.chamberlain@onetechplace.com
cell: 850-567-2994

parts are located in Tallahassee FL 32301 - can use to estimate shipping.

Thanks in advance.

Bill
Posted by: mopar_muscle

Cuda Challenger steering wheel - 02/04/18 11:36 PM

Steering wheel in excellent condition. Comes with horn switch and center cap. $100 mopar_muscle76@yahoo.com
Posted by: mopar_muscle

valve cover oil breather - 02/04/18 11:58 PM

factory OEM valve cover oil breather. Came off my 340, 4 barrel. $20 mopar_muscle76@yahoo.com
Posted by: WINGNUT

72-74 Cuda headlight bracket - 02/05/18 01:12 PM

Fits left or right. $30 plus shipping. No PayPal, Money order only.
Posted by: hemi_tyme

71 challenger grills - 02/05/18 02:11 PM

I have two 1971 challenger grills for sale one Is very good shape all tab are in good shape except one that attaches to center and only half the hole is missing $1100 obo





please Pm me here or email racer2585at aol.com thanks for ad Moparts
Posted by: hemi_tyme

Re: 71 challenger grills - 02/05/18 02:19 PM

Here's the other grill has top plate mount but needs a little work on the end tabs $850 obo plus the trip





Please Pm me here or email racer2585 at aol.com Thanks for the ad moparts
Posted by: shifterguy

72-74 Cuda Parts - 02/06/18 05:12 PM

Mint set of 72-74 Cuda grill trim rings. Also 4 mint stainless taillight trim rings. $125. Contact Gary at: clumberland@hotmail.com
Posted by: dsd70bee

Re: 72-74 Cuda Parts - 02/06/18 07:35 PM

Set of four NOS in the bag 426 HEMI spark plug wire grommet, part #2098980 , two per valve cover $150.00 for a set of four (708)288-2879 Scott
Posted by: QuickBpBp

70-74 Challenger Vinyl Top Trim Set - 02/07/18 05:08 PM

Nice clean used set of vinyl top trim for 70-4 Challenger. This is all 4 pieces.

SOLD

Parts are located in SE PA.
Can send more pictures if interested.
Pm here on the board or e-mail bretts440@frontiernet.net
Thanks for free ad Moparts!
Posted by: CANDK

Cuda shaker hood trim ring SALE PENDING - 02/07/18 05:12 PM

I have a cuda shaker hood trim ring that I bought new, never used or even really played with it, and now don't need.
This is the be&a version that is made of zinc and has the pentastar logo and mopar part # cast into it (see pic). Comes complete with gasket and the correct nuts.
Sells on be&a for $279 + shipping.
It'll come to you double-boxed and I can ship as cheap as possible.
Yours for $210 + shipping.

Sake pending
Posted by: mosweethemi

New Challenger Paers - 02/08/18 02:19 AM

1970 -1974 new Challenger parts New AMD Hood $500.00 ,New AMD left fenders $350.00 New rear floor pans ,Pans that's in front of the rear seats $ $150.00 A;SO HAVE MORE CHALLENGER PARTS pm me on here , PHONE ME 540-337-4310 E-MAIL MOSWEETHEMI@YAHOO.COM ALL PART'S O.B.O PARTS IN VA 24477
Posted by: moparmarks

Re: E Body - 70 Cuda Grill Emblem - 02/08/18 09:32 AM

1970 Cuda grill "Plymouth" emblem. Excellent drivers condition.
#2998282
85.00
Plus shipping.
Take check, MO or PP.
Free delivery to the MATS or S/Fling with prepaid.
Posted by: moparmarks

Re: E Body - 72-4 Challenger Grill Emblem - 02/08/18 09:35 AM

72-4 Challenger grill emblem in very good drivers condition.
#2673505
85.00
Posted by: blewbyu

1970 Dual point distributor for a 340 - 02/08/18 12:35 PM

I have a 1970 dual point distributor correct for a 340 with a date code of 40 , 4th week of 1970 will sell for $200 plus shipping.

Blewbyu2bad@aol.com
Posted by: mopar_muscle

BIG BLOCK AIR CLEANER - 02/09/18 12:54 AM

DUAL SNORKEL AIR CLEANER


THIS AIR CLEANER CAME FROM MY 1970 DODGE CHALLENGER R/T. IT IS IN REALLY GOOD CONDITION FOR ITS AGE....STILL HAS ITS ORIGINAL BLACK WRINKLE PAINT.

$400

mopar_muscle76@yahoo.com
Posted by: mopar_muscle

unslienced air filter - 02/09/18 01:14 AM

Original OEM part. made for the small block engines with a 4 BBL. Comes with a new air cleaner and 340 pie tin.

$275

mopar_muscle76@yahoo.com
Posted by: arizonaparts

1971-74 Auto consoles - 02/09/18 01:35 PM

1971-74 Auto consoles



47.50 for the top one



35.00 for the lower one forward part on the top has 2 holes drilled in it



shipping extra













www.arizonaparts.com





mkolner14@hotmail.com



480 966 6683
Posted by: b5cuda69

Cuda parts - 02/09/18 09:26 PM

Bundle of cuda interior trim, front and rear window interior; some duplicates, unrestored, $75 for all.
Side interior trim pieces, both sides, $50 for the pair.
'70 tail lights, 3 units, $150 for all.
'71-74 cuda hood scoops with inserts, $125.
Crush can, $25.
Blue visors, $30.
Brand new '70 cuda grill bought from Roseville, never installed, $375.
All prices plus shipping. Thanks!
[img:left]https://imgur.com/ZT3jauB[/img]
[img:right]https://imgur.com/Mf2Msc9[/img]
Posted by: TB3CUDA

Re: E Body - Parts For Sale - 1st Quarter - 02/10/18 09:44 PM

cuda challenger parts.
set of bucket seats from a 71 challenger $350 they have tracks and plastic backs.SOLD
70-71 cuda challenger custom woodgrain steering wheel $225 excellent condition
70-74 cuda challenger a/c dash vents and controls non rallye the controls need a new switch and vacumn block the housing is nice. $460 pm or e-mail tb3cuda@charter.net
Posted by: BlenheimBoy

Re: E Body - Parts For Sale - 1st Quarter - 02/10/18 11:36 PM

1970 Cuda headlight bezel mounting kit
brand new
$15

1972 - 74 Cuda plastic door grab pockets with steel mounting brackets
Nice shape, black
$25

shipping extra
Can text pics, send me pm and number to text pics
Thx
Bill
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 02/11/18 05:08 PM

1970 426 HEMI 4-speed front and rear carbs matched date codes C0 4742 on the front carb, CO 4745 on the rear carb, excellent cores to restore, very complete, very correct, no issues period $5000.00 for the pair (708)288-2879 Scott
Posted by: mopar_muscle

E body ashtray - 02/12/18 09:13 PM

console ashtray for the 71-74 console. $10 mopar_muscle76@yahoo.com
Posted by: mopar_muscle

Challenger passenger rear quarter glass window - 02/12/18 09:20 PM

nice clean piece, no scratches. $120 mopar_muscle76@yahoo.com
Posted by: kdsmith07

TTI b & e polished ceramic hemi headers 700.00 - 02/12/18 09:43 PM

set of TTI polished ceramic coated hemi headers with thermal barrier and 4" collector.# TTIstg5 214C5.these are new never installed headers that were bought a few years back.been in and out of the box more than once and someone used the collectors and gaskets.does come with the mounting bolts though.these are in good condition with one tube having a couple of light scratches.have more pics if needed.asking 700.00 plus the ride from ga.30052.pm me or call or text kent @ 678-542-9138.thanks moparts
Posted by: rtplumcrazy1

Re: E Body - Parts For Sale - 1st Quarter - 02/13/18 11:38 AM

Rallye dash switch panel with switches, price is $75, call me 541 868 6431
Posted by: dsd70bee

Re: TTI b & e polished ceramic hemi headers - 02/13/18 06:23 PM

1969, 1970 and 1971 power steering cooler for "B" and "E" body cars with 340, 340 SIX PACK and 426 HEMI, original part in nice used condition $450.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 02/13/18 06:39 PM

"B" and "E" body reverse light that goes on the dash of 4-speed cars very nice used condition, includes mounting bracket, I have bench tested it and it does light up $150.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 02/13/18 07:03 PM

1972, 1973 and 1974 E-body speedometer NOS in the box for cars with Rally Cluster $400.00 (708)288-2879 Scott
Posted by: rtplumcrazy1

Re: E Body - Parts For Sale - 1st Quarter - 02/13/18 10:18 PM

70 E body original power brake booster and master cylinder number 2225541. These have never been apart, taken off a 70 cuda in 1972 or so, price is 250 for the pair, call if interested no texts or texts please. CALL me if interested 541 868 6431
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 02/14/18 04:03 PM

1969, 1970 and 1971 power steering cooler for "B" and "E" body cars with 383, 440 and 440 SIX PACK, original part in nice used condition $450.00 (708)288-2879 Scott
Posted by: NV69B7RR

Re: E Body - Parts For Sale - 1st Quarter - 02/14/18 10:12 PM

1971 Cuda Tail Light lenses, 1 pair( L & R) super nice & shiny, no crazing, can send better pics. $80 Shipped in the US 48, USPS.
PM me or get my email from my profile.
Posted by: dsd70bee

Re: E Body - Parts For Sale - 1st Quarter - 02/14/18 11:18 PM

1966 to 1971 426 HEMI throttle cable bracket for 4-speed cars, original, not reproduction $100.00 (708)288-2879 Scott
Posted by: PHYSIXX

Re: E Body OEM rear tie-down brackets - 02/15/18 10:46 AM

SOLD!

I have for sale a pair of OEM E-body rear tie-down brackets. These brackets fit the 70-74 E-body cars. They were taken off of a 71 Challenger a number of years ago and have been sitting on the shelf since then. These are the brackets that bolt to the rear frame rails so that the car transporters can tie the cars down for transport to the dealerships.

https://www.classicindustries.com/product/me5054.html

I would like to get $25 plus the shipping for the pair.

Edison, NJ
rider1454 at aol.com
Posted by: BIGJOE30

Disc Brake Setup 70-72 - 02/16/18 08:59 AM

Disc Brake Spindles, caliper brackets, and dust shields from 1971 Road Runner. Kelsey Hayes Pin type. Have been wire brushed. Includes all hardware shown. All threads are good. Dust shields have some paint removed from wire brushing.
Spindles: 2535693 & 2535692
Brackets: 86169 & 86170
Should all fit in a flat rate box, if so, shipping is $19.
$150
724-581-7233
Posted by: QuickBpBp

Original 66-71 Hemi 4 speed Throttle bracket - 02/16/18 08:03 PM

Nice used original 426 4 speed Hemi throttle cable bracket. Nice used condition.

Reproduction Hemi throttle spring bracket

SOLD BOTH THANKS MOPARTS!

Part is located in SE PA.
Can send more pictures if interested.
Pm here on the board or e-mail bretts440"at"frontiernet.net
Thanks for free ad Moparts!
Posted by: mcat4321

1970 cuda 383 4 speed car parts - 02/17/18 05:06 PM

rear backing plates and drums-8 3/4....200 obo
complete front drum brakes with spindle and all.....200 obo
radiator and fan shroud....200 obo
located in cincinnati...OBO
PM me here