E Body - Parts For Sale - 4th Quarter

Posted by: moparts

E Body - Parts For Sale - 4th Quarter - 09/30/17 10:12 PM

up
Posted by: JRepucci

Re: E Body - Parts For Sale - 4th Quarter - 09/30/17 10:18 PM

70-1 cuda front side marker lights w/pigtail $25 each
Posted by: moparmarks

Re: E Body -Cuda side panels - 10/01/17 07:10 AM

Original Cuda black interior rear side panels for hardtop. Very good drivers condition with no major damage or sun rot. Couple very minor scuffs and scratches.
250.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.

SOLD
Posted by: moparmarks

Re: E Body - Dash Pad - 10/01/17 07:11 AM

Original black 71-4 dash pad for a/c and 3-speaker dash. Good drivers condition. Has a good crack next to the emblem and a couple very minor scuffs on top drivers side. No other damage.
250.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body -Convertible parts - 10/01/17 07:11 AM

New top pump. Sold
Good used pump. 75.00
Under dash switch harness. Have two. 75.00ea
Manual top stands. On one the plastic has a piece broken off. 200.00
New reproduction switch. 150.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body -Convertible Seat Cover - 10/01/17 07:11 AM

Black rear seat cover for 70 Cuda convertible. Came in a 71 project that I finished and put the correct 71 cover in. This one is in new condition other than it has been installed. Don't know the brand.
175.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body -Window Regulators - 10/01/17 07:12 AM

Quarter glass regulators. Very good drivers condition. No damage or missing teeth.
70 Cuda real nice 250.00
71-4 Challenger 175.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.

Posted by: moparmarks

Re: E Body -Cuda Jack - 10/01/17 07:12 AM

71 Cuda jack assembly. 2931100 hook. 0J date on jack.
Excellent drivers condition.
250.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.

SOLD
Posted by: moparmarks

Re: E Body - Cuda fender gills - 10/01/17 07:13 AM

New reproduction 71 Cuda fender gills. One has a broken stud otherwise no damage. Includes mounting plates.
275.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body - 73 Wiper motor - 10/01/17 07:13 AM

Nice 3-speed wiper for 73 E-body. Good drivers condition.
125.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid
Posted by: moparmarks

Re: E Body - 74 Wiper Motor - 10/01/17 07:14 AM

Nice 3-speed wiper for 74 E-body. Very good drivers condition.
150.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body - 72 T/Q - 10/01/17 07:14 AM

Carter T/Q for 1972 340 w/ manual tranny
6138S 314 1
Looks to be in real good condition but I don't of it's working condition
so I would plan on re-kitting it.
250.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.

SOLD
Posted by: moparmarks

Re: E Body - Cuda Vinyl Top Moldings - 10/01/17 07:15 AM

Cuda vinyl top moldings. Fits 70-74
New reproductions 150.00
Nice used. No damage but needs a buffing. 100.00 SOLD
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body -Steering wheel - 10/01/17 07:15 AM

Standard wood grain steering wheel. Good drivers condition. Has impressions from a cover lacing. Only in a couple spots otherwise is a pretty nice wheel.
150.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body - Parts For Sale - 4th Quarter - 10/01/17 07:15 AM

Right side a/c duct 75.00
70 fuel vapor line 45.00 SOLD
71 fuel vapor tank. 80.00
Under dash a/c harness 30.00 Sale pending
Fuel fill tube boot 15.00 new repro SOLD
70 washer bottle manual pump 40.00 new repro
71 Cuda right tail light bezels.
new repro, white one, 75.00
Real nice original 65.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.

Posted by: moparmarks

Re: E Body - Rallye Dash Wood Grain - 10/01/17 07:16 AM

New reproduction Rallye dash woodgrain. 72-4. 125.00
70-1 woodgrain sticker only 25.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.

Posted by: moparmarks

Re: E Body - Lower Control Arms - 10/01/17 07:18 AM

From a 72 B-body nice pair of lower control arms with sway bar tabs. Very good condition. Bushings were changed about 10 years ago. No damage.
250.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.

SOLD
Posted by: moparmarks

Re: E Body - Parts For Sale - 4th Quarter - 10/01/17 07:20 AM

70 AM 8-track. Wires have been cut. Need restored. Don't know if it works.
SOLD
Posted by: moparmarks

Re: E Body - K-Frames - 10/01/17 08:42 AM

Have several V-8 K-frames from desert cars.
71-2B 70-4E 125.00
68-9B 125.00
66-7B 100.00
63-5B 125.00
62B 150.00
68-72A 100.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: 6PAX

Re: E Body - Parts For Sale - 4th Quarter - 10/01/17 09:02 AM

72-74 E-body bucket seat tracks. Nice shape. $250

NOS Challenger T/A front chin spoilers. Still have dealer stickers on them. Minor shelf wear. $250

1970-71 Challenger deck lid with wing cutouts. Does not have T/A spoiler cutouts. Very nice shape. $400 Pick-up only.

70-74 E-body brake pedal switch and bracket. $20

Two sets of new E-body side-view mirror mounting screws for 70-74 E-bodies/71-72 B-bodies. $15 a set.

E-body disk brake assemblies with rotor, calipers, spindles. dust shields, etc. Not sure of year but I think 72 or 73. $300

1970 Challenger driver side taillight lens. $75

1971 Challenger painted gas cap. $35

1970 E-body dash woodgrain decals. $40

70 Challenger dash speaker grill #2984783. $50

Shaker hood six pack air cleaner base plate support brackets. New. $75

1971 Challenger passenger side rear quarter molding. $35

Challenger taillight harness. $50

E-body glove box lamp and lens. $30

One pair of E-body wire harness retaining brackets that go on the sides under the rear seat. $30

71 B/E-body ignition light harness complete with delay harness. $75

E-body heater box vent cable. $20

Woodgrain standard dash gauge panel and switch panel from a Barracuda Gran Coupe convertible. Has headlight, dimmer and wiper switches and the fourth hole labeled top-lift. $200

71-74 E-body driver's side dash bezel. $50

Original E-body bumper jack anti-rattle felt. $15

New 440 Six Pack shaker emblems 3462491 3462492. $150

NOS horn relay/ignition buzzer 3513206. $50

72-74 E-body steering wheel. The grip and spokes are in real nice shape $125

Nice original E-body black passenger side kick panel. $40

Challenger passenger side and driver's side front parking lens. $25 each

New reproduction black E-body kick panels. $75

1971 E-body radiator #3443972. $100

Pair of chrome E-body door lock levers. $20

2 Pair of new E-body horn brackets, 1 long style, 1 short style. $20 pair

Challenger driver side front side marker assembly. Lens cracked and plug is missing but bezel has good chrome. $25

New MAS Racing Cuda chin spoilers. $40

1971 Dodge body and chassis service manuals. Originals not reprints. Nice shape. $75

New 1970 Challenger illustrated facts and features manual. $10

ERTL Hobby Edition 1/18th scale model B5 blue 440 six pack 1970 Challenger R/T. 1 of 2500. With original box. $35

Chilton's 1965-72 Barracuda/Challenger repair and tune-up guide. As-new condition. $50

1970 Challenger R/T Dream Machines trading card #29. $3

Prices do not include shipping. gt340 at yahoo.com
Posted by: 1rustedrt

Re: E Body - Parts For Sale - 4th Quarter - 10/01/17 09:54 AM

Loc: martinsville Indiana

1970 challenger SE back side of hood SE trim piece polished ready to install no dents or scratches very nice hard to find $160.

1970 OEM challenger grill in good shape $75.00

1970 OEM challenger headlight bezels. $25 ea. r-l

1970-74 challenger new in box longitude stripe kit hi c orange color. $30.00

1970-74 challenger exterior windshield upper trim r&l $20.00 for pair [sold]

1970-74 challenger cuda passenger side quarter window regulator, with guide, and anti rattle channel for back side of window. $20.00

challenger 1970-74 door window regulator R or L very good condition $15 ea

26"OEM radiator FOR CHALLENGER CUDA for small block has new 3 row core. no leaks looks nice $55.00

1970-74 challenger cuda heater a/c box with cores and fan. $25.00

1970- 74 cuda safety catch for hood $15.00

1970 challenger hood release some pitting $15.00

1970-74 challenger trunk latch $10.00

will be posting my extra parts as i finish up my ride
can send pictures on request,will consider offers on any parts listed

prices do not include shipping. open to offers on any parts listed

have lots of other parts also most in good usable shape email rdapr17556@aol.com
Posted by: DPS_1

1971 HEMI Auto Carburetors - 10/01/17 10:32 AM

I have a matched pair of HEMI AUTO Carburetors for a 1971 Cuda, Challenger, Charger, GTX or other B-Body MOPAR [P/N 4970S Dated Week 39 of 1970 and 4971S Dated Week 40 of 1970]. The carburetors have been meticulously restored by Brian Brady. Each carburetor has a Carter Specification sheet included. These carburetors are rare and hard to find in this state. I am offering these carburetors for $7500.00 OBO plus shipping and insurance. Please contact me if you have questions via email at dpsuozzi@gmail.com or by phone at 520-885-1176
I have more pictures of these HEMI carburetors, plus the specification sheets available for viewing.
Posted by: Alaskan_TA

FOR SALE - Assorted 1970 & early 1971 bucket seat hinge cove - 10/01/17 02:14 PM

FOR SALE - Assorted 1970 & early 1971 bucket seat hinge covers to help you fill out missing or damaged sets.

All buttons are 'loose', rivet failure is common for these.

These are correct for all 1970 & early 1971 A, B & E bodies with bucket seats & the outers with buttons also fit E-bodies with bench seats.

$50.00 each if you come by in person. $60.00 each includes postage inside the US including Alaska & Hawaii. If you buy 2 or more, figure $50.00 each plus $10.00 postage for the first one & add $1.00 for each additional cover.


If you are in Canada or overseas $50.00 each plus actual postage no matter how many you buy.

Emails only - sixpak340(insert at symbol here)att.net

Sale pending on four of them but these three are still available;
Posted by: dart4forte

Re: E Body - Parts For Sale - 4th Quarter - 10/01/17 04:45 PM

Restored 1970-1974 E Body seat belt set, new webbing, all hardware restored all necessary hardware to completely install your seat belts. Date tags and NOS webbing is available at an additional charge.

$350 for a basic set. A basic set consists of belts for bucket seats or bench, shoulder belts rear bench. A third lap belt set or shoulder belts for the rear bench is available for an extra charge. Hardware such as bolts, mounting plates, date tags etc. are extra. A basic set will have some flaws in the hardware. No core charge is required.

$550 for a show quality set. This set includes everything needed to install in your car. It will include all necessary belts, hardware and date tags. A $150 core charge is required. $250 core charge for 71 belts. If you have a core set it must be complete, be of the same model year and totally free of pits in the chrome and corrosion. Cores must include bolts.


Mesa AZ


Coming Soon

Seat belt storage clip metal brackets. Found standard on the deluxe seat belt sets. These brackets are usually missing and hard to find.
Posted by: FC7 cuda

Re: E Body - Parts For Sale - 4th Quarter - 10/01/17 06:35 PM

Nos sending unit for a 1970-74 Cuda or Challenger. This is a new NOS mopar not a reproduction. Comes with gasket in box. This is a 5/16 sending unit. Correct for small block, 6 cylinder, and 383 engines. $175
Posted by: RJS

Re: E Body - Parts For Sale - 4th Quarter - 10/01/17 07:37 PM

Steering Wheel Center Cap
Small crack on outer edge and some other marks
Price $40 plus shipping
Please PM
Thanks Ron
Posted by: RJS

Re: E Body - Parts For Sale - 4th Quarter - 10/01/17 07:39 PM

(1) Tuff wheel and Rim Blow adapter. This is a car adapter with the notch in the spline will not fit truck.
Wire in place complete with nuts.

Only defect is signal cancel ring needs to be replaced, use your old one or buy new reproduction snap ring.
Price $100 plus shipping
Please PM
Thanks Ron
Posted by: RJS

Re: E Body - Parts For Sale - 4th Quarter - 10/01/17 07:40 PM

**********SOLD*****************
Selling one pair of GoodYear PolyGlas G 60-15's.

Ron
Posted by: RJS

Re: E Body - Parts For Sale - 4th Quarter - 10/01/17 07:46 PM

1 set of shoulder belt holders and Black covers.
I bought them in error for my car and would just like to get my money back. Fit 72 and later.
Price $50 Shipped in US only
Please PM
Thanks Ron
Posted by: moparmarks

Re: E Body - 70 Challenger grill - 10/02/17 11:46 AM

Pretty decent grill for 1970 Challenger. No major damage. Some minor scratches and scuffs. Very good drivers condition.
400.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body - Shaker parts - 10/02/17 11:52 AM

New reproductions from Ben Snobar.
Cold air door 225.00
Cable set.100.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: davesmopars

70 71 Cuda Challenger Barracuda convertible top switch panel - 10/02/17 12:15 PM

70 71 Cuda Challenger Barracuda convertible top switch and Dash panel assembly
really nice shape
Convertible Top Dash cluster panel in great shape 3488406
Convertible Top Switch 2947406
Wiper washer switch 2770380
Headlight switch 2947305
Dimmer switch 294713
650.00 or best offer
davesmopars@yahoo.com

Posted by: littleredcoffin

73-74 challenger rear bumper filler corners - 10/02/17 02:37 PM

Matched pair out of 73-74 challenger rear bumper filler corners $20pr,calls only 603 209 1678.Payment by us postal money orders only
Posted by: shifterguy

Re: E Body - Parts For Sale - 4th Quarter - 10/02/17 08:35 PM

72-74 Cuda Grill and tail light trim rings. I have 2 near mint chrome trim rings for 72-74 Cuda and 4 stainless tail light trim rings. Asking $100 for all plus shipping costs. Respond to email: clumberland@hotmail.com.

Pictures available upon request.
Posted by: roadrunninMark

70 barracuda whole or parts - 10/03/17 12:01 PM

SOLD!!!!!!!!!!!!
1970 Plymouth Barracuda. I tried to save it but I think it is too far gone for me. Frame rails not in good shape and every floor piece is rotted through. It is a 318 auto car, no engine or trans., white w/ black vinyl top and black interior, power steering, 4 wheel manual drums, non a/c, standard gauge, console on floor, roll down back windows, open end rear. Still has grille with 3 or so horizontal pieces missing and a crack on the bottom main part; couple verticals need to be glued (should be fixable), 1 turn signal bucket with slight chip. All door glass is there. Has all door panels *weathered) and window cranks, driver's side mirror, console, top half of back seat, dash and gauges, glove box, ash tray, rear and front suspension with brakes, power steering pump. Looks like all brakes are intact, including lines, actual drums are shot I think, were stuck and pried off to get car to roll. Lots of odds and ends, 2 of the 4 side marker lights are good. I pulled it out of a junkyard. Asking $2600, bill of sale only, no title, vin tag or data plate (were missing). I do have vin number from mylar tag. I'll add more pics later. Car is in south jersey. Will come with 4 roller wheels, those cragars are just holding it up right now. Front bumper is straight, back not bad either. Will sell as whole or parts.

PM me only. Thank you

More pics here: http://s729.photobucket.com/user/roadrunninMark/library/70%20barracuda
Posted by: ChargerCrazed

Re: E Body - Parts For Sale - 4th Quarter - 10/03/17 09:32 PM

1971 Plymouth Cuda Bucket Seat Foam.
Upper and Lower foam for one bucket seat only. Original, used condition.
Asking $65 plus shipping.
If interested, please email: chargercrazed@usa.com
Posted by: chally142

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 10:57 AM

Original Challenger front license plate bracket. Part number 2962336.
Has pitting, but nobody will see it and has been powdercoated, so it won't get any worse. Overall a very good, solid piece. They used a lot of metal back in the day. The plastic retainers for the screws and rubber bump stops are all there. You just need to install.
Price: $15 plus shipping
Email: chally_142@hotmail.com

20170519_074250-1280x720

20170519_074315-1280x720

20170519_074330-1280x720

Two reproduction Chrysler paper floor protector mats. "Customer Care"
Measure 17" x 15"
Price for both: $10 plus shipping
Email: chally_142@hotmail.com

20170519_074507-1280x720
Posted by: chally142

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 11:08 AM

Vacuum choke pull off from a 1970 Dodge Challenger Big Block, but could fit other makes and models. It's used and works fine. Comes with an original box.
Price: $10 plus shipping
Email: chally_142@hotmail.com

20170519_080752-1280x720

SE rear window glass. Typical light scratching. Can be polished out. Very good cond. They don't reproduce these.
Price:$100 plus shipping
Email: chally_142@hotmail.com

SE Rear Window

Posted by: chally142

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 11:10 AM

Four used OEM 14" trim rings. They have the typical small dings and scratches that can be found in used rings, but overall in really good shape compared. There is a guy on here who restores them and would be an easy resto compared to a lot more beaten up rings you see out there.
The outer thin part has the polished finish, while the inner part has the brushed finish. The outside diameter is 15 1/4" & is 2 1/4" tall resting on the counter. The inside diameter of the brushed part is 12" & the sides of the brushed part are 2 3/8" long. Selling all 4 as a set. Will not separate.
Price: $449
Email: chally_142@hotmail.com

Trim Ring 1

Trim Ring 2

Trim Ring 3

Trim Ring 4
Posted by: chally142

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 11:14 AM

Assorted parts. See pictures for details. Everything from clips to grommets to brackets and so on. Parts are for or came off of a 1970 Dodge Challenger, but could fit other makes and models. Selling everything together; will not separate.
Price: $75 plus shipping
Email: chally_142@hotmail.com

20170519_083220-1280x720

1970 Dodge Challenger OEM Battery Tray Lower Support Bracket. In very good shape. Just needs to be sandblasted and painted. May fit other makes/models. Price: $10 plus shipping
Email: chally_142@hotmail.com

Battery tray bracket

Battery tray bracket1
Posted by: chally142

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 11:16 AM

1970 Dodge Challenger OEM Used Brake Light Wiring Harness. Taken off a car in 2005. May fit other years/makes/models. Price: $75 plus shipping
Email: chally_142@hotmail.com

Brake light wiring harness

Mopar Chrysler Dodge Plymouth Clutch, Brake, Emergency Brake Pedal Pads. The brake/clutch pad is numbered 2950887. The emergency brake pads are numbered 2996053. In very good condition. Just need to be cleaned up. Price: $25 plus shipping
Email: chally_142@hotmail.com

BrakeClutchEmerPedal Pads

BrakeClutchEmerPedal Pads1
Posted by: chally142

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 11:24 AM

Disc Brake Calipers OEM. First caliper: Cast 346 (Friday 12/12/69); machined/assembled/inspected 51 0 (Friday 2/20/70). Second caliper: Cast 20 (Tuesday 1/20/70) machined/assembled/inspected 57 0 (Thursday 2/26/70). The "2" in the sequence of stamped numbers on both calipers denotes assembly shift or line. Price: $350 plus shipping
Email: chally_142@hotmail.com

Caliper

Caliper1

Caliper2

Caliper3

Caliper4

Caliper5

Caliper6

Caliper7

Caliper8
Posted by: chally142

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 11:26 AM

Mopar Chrysler Dodge Plymouth Dash Bulbs, #57. Partial pack with 6 left. Brand new. Price: $8 plus shipping
Email: chally_142@hotmail.com

Dashbulbs

1968 to 1970 Mopar Chrysler Dodge Plymouth Disc Brake Hold Off Valve OEM. This valve was removed from a 1970 Dodge Challenger with disc brakes. Used on all Mopar passenger cars from 1968-70 with the disc brake option. For holding off pressure to the rear brakes so the front brakes would go on a split second before. Considered a correction valve for the 1968-70 model year. During extreme braking conditions, this valve prevented the car from spinning out and evened out braking loads. Has production markings. Not sure how to read the codes, so you’ll need to determine. Price: $49 plus shipping
Email: chally_142@hotmail.com

Disc brake hold off valve

Disc brake hold off valve1

1970 Dodge Challenger OEM Engine Wiring Harness for electronic ignition. In good used condition. Will need to be rebuilt. Will need to be rebuilt. May fit other years/makes/models. Price: $75 plus shipping
Email: chally_142@hotmail.com

Engine wiring harness
Posted by: chally142

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 11:30 AM

Mopar Chrysler Dodge Plymouth OEM Upper Control Arm Right Side (passenger side). Excellent used condition. Was powder coated grey at one point. Was removed from a 1970 Dodge Challenger. May fit other makes/models. Price: $75 plus shipping
Email: chally_142@hotmail.com

Upper control arm1

Upper control arm

1970 Challenger & Dart Service Manual. Cover is worn, but the binding is very good and all the pages are there and in great shape. Price: $45 plus shipping
Email: chally_142@hotmail.com

Manual1

Manual2
Posted by: chally142

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 11:36 AM

Low Fuel Relays. Used 1970 Challenger S.E. overhead console low fuel relays. Also used on 1970 Barracuda Gran Coupe, and possibly some 1970 Mopar C-bodies too. One has a part # of 2983336 stamped on it, and the Chrysler parts catalog shows a part # of 2983828. The other has the part # of 2983828 stamped; the last 4 numbers are faded. Used with the rare overhead console that had a low fuel warning light. In very good shape. I’ve never used them, so not sure if they work. I believe they can be rebuilt too. Price: $95 each. Free shipping.
Email: chally_142@hotmail.com

20170519_080807-1280x720

20170519_080813-1280x720

20170519_080824-1280x720

20170519_080830-1280x720

Rear brake distribution block and hose. Block is OEM.
Price: $25 plus shipping
Email: chally_142@hotmail.com

Rear Drum hose and dist block1

Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:10 PM

All Aluminum Intakes:

Edelbrock 440 Performer Rpm $175,

440 Performer $145,

STR-14 Crossram Top $995,

440 M1 Dualplane $165,

383-400 DPCD Dual Plane $155,

Bigblock Edelbrock CDP6 Six 2bbl Set-Up With Carbs $795,

Smallblock Performer $115,

302-398-0821

TONYSPARTS.COM

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:11 PM


Bigblock 10-1/2” Bellhousings $340-$425,

New 70-1 Big Block And Hemi 7-Quart Oil-Pan $170,

1968 Race Hemi #2875327 Dual Point Tach Drive Distributor $345,

New Mopar Performance Hydraulic Rocker Arm $150set,

302-398-0821

TONYSPARTS.COM

Harrington Delaware 19952

Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:16 PM

a New Product!!
1970 E-body + 1971 Thru 1974 B+E-body Consoles
tonysparts.com

These Are Injection Molded As Original And Have The Correct Grain

They Fit And Look Great

Both The 1970 Only Style And The 71-74 Styles Are Available

The 1970 Style Fits All 1970 Cudas And Challengers,
And Have The Correct Seat Belt Receptacle Opening

The 71-74 Style Fits All 1971 Thru 1974 Cudas, Challengers, Road Runners, Satelites And Chargers

Automatic And 4-speed Versions Of Both Types Are Available

They Are Complete Less Top Plate, Ashtray + Door Lock.
They Include All Of The Clips For The Topplate.
(new Ashtrays + Console Door Locks Are Now Available!!)

Used Originals Are Usually Broken Or Are Missing From The Car Or Needed When Converting To Floorshift.

$325....1970 E-body Automatic Console
$345....1970 E-body 4-speed Console
$225....71-74 E+B-body Automatic Console
$245....71-74 E+B-body 4-speed Console

These Are In Stock And Ready To Ship

Available Through
Tony’s Parts
302-398-0821
tonysparts.com

Tony’s Parts

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:16 PM

A NEW PRODUCT!!
New Reproduction Ashtrays And Bezels,

These Are An Exact Replacement Of The Original, So Now Is Your Chance To Replace The Rusty, Broken Or Missing Ashtray With A Brand New Shinny One.

They Fit 1971-74 E-body And B-body Consoles,
1970 E-body Rear Interior Panels And
66-70 B-body Armrests

Available For $45,
tonysparts.com

302-398-0821,

Tonys Parts

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:17 PM

A NEW PRODUCT!!
New Reproduction Console And Glovebox Door Locks,

These New Locks Work Smooth And Fit Just Like The Originals, Replace That Worn, Broken Or Missing Lock With A Nice New One.


They Fit:
64-74 B-body & 70-74 E-body Console Lids,
69-76 A-body Console Lids (must Remove Bezel),
62-69 B-body Glovebox Doors &
68-69 A-body Glovebox Doors.

Available For $40,

tonysparts.com

302-398-0821,

Tonys Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:17 PM

! Finally New E-Body A-Pillar Trims That Fit!!



Tonys Parts Is Proud To Release Their E-Body A-Pillar Trims Available With Their 2 Different Screw Locations For 1970 Thru Mid 1971 And The 1971 And Newer Version. They’re Injection Molded Plastic, Have The Correct Grain And Hole Locations Per Your Application

Available For $155pr.

tonysparts.com

302-398-0821,

Tonys Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:18 PM

A NEW PRODUCT!!

Dash Mounted 4-Speed Reverse Light



Used on 68-Newer 4-Speed Cars
$75 NEW LOWER PRICE!

302-398-0821

TONYSPARTS.COM

Tony’s Parts

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:20 PM

A NEW PRODUCT!!

Console Door

Injection Molded, 2 Piece Like Originals
Ready To Install


$75

302-398-0821

tonysparts.com

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:20 PM

A NEW PRODUCT!!

E-Body Overhead Console Light Lens
Fits All 70-1 Barracuda Gran Coupes, Challenger “SE”s And All Others With The Overhead Console Light

These Are Commonly Broken, Yellowed Or Missing


Injection Molded Plastic Like Originals,
In Stock And Ready To Ship

$45

302-398-0821

tonysparts.com

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:21 PM

Tony’s Parts Is Proud To Announce Their Latest Reproduction Part

72-74 E-body Rally Dash Speedometer Tripometer Reset Button/Knob



These Are Usually Missing, Broken Or The Chrome Has Peeled Off Them

These Are Brand New Plastic And Chromed Just Like The Originals

They Are In Stock And Available For $20 Each

302-398-0821

tonysparts.com

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:21 PM

70-71 E-body Rally Dash Tripometer + Clock Reset Knobs


These Are Usually Missing Or The Chrome Has Peeled Off Them

These Are Brand New And Chromed Just Like The Originals

They Are In Stock And Available For $40 pair

302-398-0821

tonysparts.com

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:23 PM

A NEW PRODUCT!!
1970-1974 E-body Rally Dash Heater Control Panel



Fit And Look Are Perfect

Injection Molded Plastic Finished And Detailed With The Correct Lettering And Texture, Just Like The Originals

All Tabs And Bosses Are Present

Available Through Tony’s Parts For $115

302-398-0821

tonysparts.com

Tony’s Parts

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:24 PM

A NEW PRODUCT!!

1967 and newer thermostat housings


These are commonly missing or oxidized so badly that they wont even seal much less look good.
So we reproduced them just like the originals including the numbers on them.
We even went ahead and made 2 versions of them, the standard version that parting line is more smooth and the concours version that has a more pronounced parting line. Available for $40 and $45

In Stock + Ready To Ship

302-398-0821

TONYSPARTS.COM

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:24 PM

A NEW PRODUCT!!
72-74 ‘cuda + Barracuda Headlight Bezels

Injected Molded, Chromed + Detailed Correctly

$125 Per Pair

In Stock + Ready To Ship

Tony’s Parts
302-398-0821

tonysparts.com

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:25 PM

A NEW PRODUCT!!




Right Or Left Hand Lower Dash Trim

Fits All E-bodies Except 70 Challenger)

This Commonly Missing Or Broken Part Mounts To The Dash Frame + Runs From The Center Of The Dash Pad Down Below The Radio + Over To The Steering Column

It Is Injection Molded, Has The Correct Grain + Fits Great

Available Through Tonys Part’s For $75 Per Side

In Stock + Ready To Ship

Tony’s Parts
302-398-0821

tonysparts.com
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:27 PM

A NEW PRODUCT!!

72-74 Challenger Rally Plastic Fender Scoop Inserts.

This Commonly Broken Or Missing Part Mounts Behind The Fender Scoop Bezel Is Injection Molded And Correct In Appearance + Fit

$85 Pair,

302-398-0821

tonysparts.com

Tony’s Parts

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:28 PM

A NEW PRODUCT!!

A New A/C Heater Control Panel And Switch Bezel Is Available For Your Rallydash Equipped Cuda Or Challenger.



These Are Specific To Rally Dash Equipped Cars.

They Look And Fit Just Like The Originals.

The Vent Register Functions As Original And The Detail All Of The Parts Is Accurate.

Just Install Your Buttons And Switches.

They Are Available As A Set For $220 ,
We Have A Small Quantity Of Extra Inner Switch Bezels Available For $95,

tonysparts.com

302-398-0821

Tonys Parts

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:30 PM

A NEW PRODUCTS!!

1970 Challenger Right + Left Side Lower Dash Trims.

This Is Specific To 1970 Challenger Only.





These Are Now Available From Tony's Parts For $110 Per Side

tonysparts.com

302-398-0821

Tonys Parts

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:31 PM

A NEW PRODUCT!!

The Rare And Hard To Find #2806070 Clutch Fan Drive Units Are Available As A New Reproduction.

These Were Used On All 67-71 426 Hemis, 67-71 Big Blocks And 1970 340s Without Air Conditioning.
These Were Used Into The 1971 Model Year

These Are Commonly Missing Or Worn Out, Loose And Wobbly.

These Appear Extremely Close To Original And Even Have The Correct Red Seal.

They Are Very Affordable At $200 And In Stock At Tony’s Parts



tonysparts.com
Please Email Through Website

302-398-0821

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:32 PM

Concours correct 2806070 fan clutches.



We came out with a previous version and the face wasn't 100% correct, so we listened to your request and have redesigned the face to match the originals.

The Rare And Hard To Find #2806070 Clutch Fan Drive Units Are Available As A New Reproduction.

These Were Used On All 67-71 426 Hemis, 67-71 Big Blocks And 1970 340s Without Air Conditioning.
These Were Used Into The 1971 Model Year

These Are Commonly Missing Or Worn Out, Loose And Wobbly.

These are in stock and available for $300.

We also offer # and date code stamping for $10 additional.

Of course we still have our first version available for $200 for those who don't mind the bugs that are stuck in your radiator not having to look at a less then 100% correct face fan clutch.

They Are In Stock And Ready To Ship For $300
Part number and date code stamping available for $10 addtl

302-398-0821

TONYSPARTS.COM
Please call or email through our website

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:32 PM

A NEW PRODUCT!!

#2863216 18-1/2” 1968-1973 7 Blade Fan For Use With Clutch
Licensed With Part Numbers And Pentastar
Was Used On All V8 B-Bodies, E-Bodies And C-Bodies With A Clutch Fan Drive Unit



These Fans Are Commonly Missing, Damaged Or Rusty And Have Become Very Difficult To Find In Serviceable Condition.
We Saw The Need To Make These Fans, So We Did. But We Didn’t Just Make A Fan, We Got It Licensed By Chrysler As A Correct Mopar Restoration Part. So These Fans Have All Of The Factory Original Part Numbers, Pentastars, Markings, Etc. They Even Have The White Ink Stamped “Engine Side” On The Rear Of The Fan Just Like The Originals

These Are Now In Stock And Available From Tony’s Parts For $140ea

302-398-0821

tonysparts.com
Please Email Through Website

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:34 PM

! All New Part.

Lower Rod For Automatic Floor Shift Linkage For A,B,C and E-body Cars.
(Slight Modification Needed For Use On 1970 E-body With Column Lockout Linkage)

This Rod Is Almost Always Missing And Is Needed For Completing Your Automatic Floor Shift Linkage Set $45.

These Are In Stock And Ready To Ship

Tony’s Parts
302-398-0821
tonysparts.com

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:35 PM

A NEW PRODUCT!!

66-70 Chrome Seat Adjuster Knobs,


There Were Used On Bucket And Bench Seat Applications For All Body Styles,
They Are Typically Worn Or Missing And Haven’t Been Available For A Very Long Time
These Are A High Visibilty Part That Is In Your Face, Nothing Worse Then Old Pitted Chrome Staring You Right In The Eye When You Open The Door

They Are In Stock And Ready To Ship

Price is $40pr

Tony’s Parts
302-398-0821
tonysparts.com

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:38 PM

New Product
1970 And 1971-1976 Floorshift Steering Column Collar Sets

1970


1971 + newer


Whether It’s 4-Speed Or An Automatic Everyone Wants To Have A Car With A Floorshifter.

One Of The Items Needed For A Floorshift Conversion Is A Floorshift Steering Column, Those Are Getting Very Difficult And Expensive To Find. So We Have Just Released These 3-Piece Steering Column Collars For Converting A Column Shift Steering Column To A Floorshift Steering Column.

We Made The 1970 And The 1971-1979 Versions That Fit All A,B,C,E Body Columns Without Tilt/Telescopic

They Are In Stock And Ready To Ship For $160 Set

302-398-0821

TONYSPARTS.COM
Please call or email through our website

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:47 PM

All New E-body Jack Hooks.

Mopar Licensed Correct With All Numbers and Pentastars as the Originals!

Finished In Their Correct Original Colors.


Available For:

70-71 Cuda #2931100 $100,
70-71 Cuda #2931101 $100,
70-71 Challenger #2931102 $100,

Tony’s Parts
302-398-0821
tonysparts.com

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:48 PM

New Product From Tony’s Parts

Tony’s Parts Is Proud to Offer E-Body (70-74 Barracuda and Challenger) Correct Turn Signal Switch Levers/Stalks


These Have the Correct Bend and Are the Correct Length

Many cars out there don’t have the correct turn signal lever installed and the lever doesn’t come close enough to the steering wheel for ease of accessibility like the originals were

There Have Been Incorrect Ones Offered In the Past, Even the Last Versions Sold By Chrysler Didn’t Match the Assembly Line Levers, but These Are Just As the Originals And Less Expensive Too!

$40 Each

TONYSPARTS.COM
Please email through website

302-398-0821

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:53 PM



Original Heavy Duty Leaf Springs With The Correct Numbers Are Hard To Find. Many Cars Have Had Their Leaf Springs Replaced Throughout The Years And Don’t Have The Correct Ones Installed. While New Leaf Springs Are Available Today They Don’t Have The Correct Factory Stamping Numbers On Them.

So that’s Where We Saw the Void That Needed to Be Filled.

We’ve Duplicated the Dimensions, Shape and Fonts Used on the Original Springs

We Have Made The Right And Left Lower Leaf Spring With The Correct Part Numbers For The Following Applications:
-70-71 E-Body 440 and 426 Hemi Cars #3400024-34
-1970-1/2 AAR Cudas + T/A Challengers #3400048

These Are Now In Stock And Available From Tony’s Parts For $175pr

TONYSPARTS.COM

Please email through website

302-398-0821

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:57 PM

New Product

Radio Knobs Available For:

1970 B-Body
And
E-Body And
71-74 B-Body


These Are Commonly Missing From Cars And Or Radios.
Put These New Knobs On With New Chrome Ready To Install


Available For $35 For A Set Of 4 (2 Inner And 2 Outer)

They Are In Stock And Ready To Ship

302-398-0821

TONYSPARTS.COM
Please call or email through our website

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:58 PM

New Product
E-Body Ashtray Inserts with Rivets.


Replace That Old Rusty, Pitted And Faded Ashtray Insert With A New Correct Finished Insert.
Comes With Factory Style Rivets to Ease Installation

Available From Tony’s Parts For $75
They Are In Stock And Ready To Ship

302-398-0821

TONYSPARTS.COM
Please call or email through our website

Tony’s Parts
Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 04:59 PM

New Product!

E-Body Radio Surround Bezel.


These Are Commonly Broken Or Missing.
It Surrounds The Radio And Fills The Void To The Dash.
It Complements Our E-Body Heater Control Panels And Is Finished In The Correct Wrinkle Paint.

Fits All E-Bodies Except 70 Challengers With Standard Dash

Available From Tony’s Parts For $60
They Are In Stock And Ready To Ship

302-398-0821

TONYSPARTS.COM
Please call or email through our website

Tony’s Parts
Harrington Delaware 19952
Posted by: moparphilll

Re: E Body - Parts For Sale - 4th Quarter - 10/04/17 11:03 PM

OEM Center A/C dash vent for Barracuda or Cuda in BLUE Very nice FACE and Vents Functions correctly both ways, No broken vents. Back of housing has pieces cracked away but does not effect front.
Part # 2936846

$155 plus shipping
moparphilll@aol.com
Posted by: dart440

Re: E Body - Parts For Sale - 4th Quarter - 10/05/17 12:50 AM

Sold my 71 Barracuda, so I'm selling off my stash of 70-71 Cuda and Challenger Parts. Here are the first several boxes I've been through. Lots more to come. Many rare, NOS and excellent used items...as well as some reproduction. I'll be updating this list as stuff sells. Please read info at bottom of ad!!! More stuff coming...

BOX # 1
70-1 Cuda Driving Lights (YO Repro) $300
SOLD71 Cuda Fender/Body Bolt, Nut, Screw & Clip Set(Repro) $150
SOLD 71 Cuda Taillight Lenses & Gaskets(NOS)In Box 3514364-5 $325
SOLD70-71 E-Body Windshield Washer Bottle (NOS) 3431074 $80
71 Cuda Headlight Rings (Chrome) (6) - 2 Repro/4 Used $300
70-74 Cuda Outer Door Handles (Pair) (Repro) $150
70-74 Cuda Outer Door Handle (RH - Passenger) (Repro) $75
70-74 Cuda Exhaust Tips (Repro) $250
SOLD Road Wheel Centers (NOS) $105
- 3 Domes (NOS)
- 4 Retainers (NOS)
70 Cuda Redline 3-Piece Grille Molding w/Clips (Used) $80
70-71 E Body Conv. Well Molding Clips (Used) $50
70-74 E Body A/C Vacuum Switch (Used) $30
Trunk Seal (Repro) $20
70-74 Cuda Armrest Pad - Black (RH) (YO Repro) $40
70-74 E Body Rallye Gauge Voltage Limiter/Harness(Used) $20
70-74 E Body Rallye Gauge Voltage Limiter Harness(Used) $10
70-74 E Body Vinyl Top A-Pillar Molding(Pair-Used)3 Sets $20
ALL 3 Sets SOLD
SOLD70 Cuda Rear Valance Support Brackets (Used) $100
BOX # 2
MP Adjustable Pinion Snubber - Dana 60 (Used) $40
MP Adjustable Pinion Snubber - 8-3/4 (Used) $40
SOLD Pinion Snubber - Dana 60 (Used) $20
Cuda/Challenger Hood Latch Bracket (Used) (x2) $20
SOLD70-74 Cuda Front Licence Plate Bracket (Restored) $30
70-71 Cuda Grille Spacers (Black Discs)(Approx 10)(Used)$5
70 Challenger Grille Brackets (L & R)(Ex. Used) Pair $30
SOLDTransmission Spacer/Washers(Pair)(Used) $5
E Body Std. Dash Voltage Limiter Wiring (Used) $2
K Member Bolts ($30/6, $20/4)(Used) $20
Steering Gearbox Bolts/Washers (3-Pc)(Used) 2 sets $10
Steering Gearbox Bolts/Washers (2-Pc)(Used) $5
Hurst Shifter T-Handle(Used) $10
Wheel Studs (5)(Used) $2
70-74 Cuda Rear Licence Plate Bracket (Used) (x2) $30
70-72 Plymouth Dog Dish Hub Cap (Aluminum)(Used) $20
71 B & E Body Remote Driver's Mirror (Chrome)(Used) $100
71 B & E Body Remote Driver's Mirror (Chrome)(Used) $80
BOX # 3
SOLD70-74 E Body A/C Vents (Green)(Used) Set of 2 $175
70-74 E Body A/C Vents (Black)(Used) Set of 2 $200
70-74 E Body A/C-Heater Controls & Bezel (Black)(Used) $250
70-74 E Body Heater Controls/Bezel w/Rallye(Black)(Used)$150
70 Cuda Headlight Bezel (RH - Passenger)(Used) Nice $120
Left Dash Bezel (Ex. 70 Challenger)(Black)(Ex Used) $75
Right Dash Bezel (Ex. 70 Challenger)(Black)(Ex Used) $75
70 Cuda 8-Track Radio Bezel (Black) (2984027)(Used) $200
Have non-working AM/8-track, just have not located yet.
BOX # 4
70 Cuda Taillight Assemblies (Pair)(Used) $200
BOX # 5
Heater Hoses - 70 E Body Big Block W-A/C(Pair)(YO Repro)$80
NOS SUN Tachometer and Tach Transmitter (Vintage) $200
Kendig Carburetor (Used) $100
SOLD70-71 Cuda Rear Bumper Guards (Rechromed)(Pair) $120
LH Thread Wheel Studs/Nuts (Used) $20
70 A & E Body Key-In Warning Buzzer(Used) $5
SOLD70-74 E Body Inside Door Lock Levers (Pair)(Used) $5
70 E Body 3-Speaker Dash Speakers (Need Recone) (Pair) Offer?
E Body Horn Relay (Used) $2
SOLDE Body Inst. Panel Dimmer Switch (2947713)(Used) $20
SOLD E Body Trunk Light Assembly (Used) $20
70-74 Cuda Inside Door Handles(Nice Chrome)(Pair)(Used) $40
Spare Tire Wing Nut (Repro) $1
Spare Tire Wing Nut (Used) $1
71 B & E Body Fender/Hood Turn Signal Assy (Pair)(Used) $60
70-74 Cuda Door Panel Emblems(Pair)(Used) Nice $30
70-74 Cuda Door Panel Emblems(Pair)(Used) Fair $25
70-74 Cuda Door Panel Emblems(Pair)(Used)1 pin broken $20
PENDINGChallenger Hood Letters (Nice, No Pitting) (Set) (Used) $40
Challenger Hood Letters (Missing E) (Set) (Used) $10
Gas Tank Sending Unit Lock Ring (Original) $10
70-71 Cuda Side Marker Assembly Gaskets (Set/4) (Repro) $5
70-71 Barracuda Gran Coupe Fender Emblem (1) (Used) $20
70 Challenger "R/T" Grille Emblem (Used) (2998547) $30
70 Cuda Body Plug Kit (BPK1S - Year One) $100
70-74 E Body Window Cranks (3) (Used) $5
70-71 Cuda Side Marker Running Lights(2 Yel/1 Red)(Used)$30
70-71 Cuda Side Marker Housings/Backing Plates (Used)(3)$40
70-74 E Body Heater Control Cable (Used) $25
70 E Body Vent Cable (4)(Each)(Used) $20
E Body Throttle Cables(3)(Each)(Used) $5
SOLD70-74 E Body Pistol Grip Shifter Boot (NOS) $80
70 E Body Painted (RH - Passenger) Racing Mirror(Used) $100
Box #6
Alternator Stator Windings 3656453 60-amp (NOS) $50
SOLD70 Cuda/Challenger Turn Signal Switch(NOS)2947905$400
70 Challenger R/T Grille Emblem (NOS) 2998547 $120
Carburetor Choke Pulloff Diaphragm (2933190) (NOS) $15
Carburetor Choke Pulloff Diaphragm (2933190) (NOS) $15
Carburetor Choke Pulloff Diaphragm (Unknown P/N)(NOS) $15
70 Cuda Road Lamp Brackets (Year One Repro) (Pair) $50
70-71 Cuda Road Lamp Wiring (Year One Repro) (Pair) $30
70-74 E Body Fender-to-Cowl Bracket(Not Sure L or R)(Used)$5
SOLD70-74 Challenger Flip-Top Fuel Cap(NOS)(3466435) $250
SOLD71 Rect. "by Plymouth" Tailpanel Emblem (Used)(2963770) $100
SOLD70-74 Challenger Hood Emblem (Pair)(2988764)440 SixPack (NOS) Brushed Finish - Purchased from dealer in '81 $200
70-74 Challenger Hood Emblem (Pair) 426 Hemi(Repro) $150
R/T Emblem (New) (Stick-on) $10
SOLD70-74 E Body Battery Tray (NOS) (2925322) $100
Window Crank (Used) $3
70-74 E Body A/C-Heater Illumination Lamp (Used) $3
70-74 E Body A/C-Heater Temperature Lever (Used) $2
Heater Hose Bracket (Used) $5
70-74 E Body A/C Panel Bracket (Used) $2
BOX # 7
SOLDRallye Wheel Centers 4.5"(Acorn w/Knockout)(Used)(Set/4)$25
904 Torque Converter Cover (Dust Shield/Insp. Cover)(Used)$5
70-71 E Body Manual Driver's Mirror (Used) Some pitting $10
70-74 E Body Vinyl Top A-Pillar Molding (1 Only)(Used) $5
70-74 E Body Standard Gauge Voltage Limiter Harness(Used)$2
71 Cuda Header Panel (Used) Excellent $300
70 Cuda Fenders (L and R) (pair) Goodmark Repro $920
71 Cuda Fenders (L and R) (pair) Goodmark Repro $920
Fenders + /set of reproduction louvers $1100
71 Barracuda Fenders (L and R) (pair) Goodmark Repro $920
72-4 Cuda Fenders (L and R) (pair) Goodmark Repro $920
70-71 Challenger Fenders (L and R)(pair) Goodmark Repro $920
70-74 Cuda Trunk lid (Repro) $400
70-74 E-Body Rear Shock Brace (Used) $100
70 Cuda Grille (New) Reproduction $500

1970-71 Plymouth Cuda 101 jack hook. This is for cars with rubber bumpers. This is an original jack hook in excellent shape. Part # 2931101. $90

1970-71 Plymouth Cuda 100 jack hook. This is for cars with steel bumpers. This is an original jack hook in excellent shape. Part # 2931100. $90

Why buy a reproduction jack hook when you can get the original part in excellent shape. The reproductions are close, but not perfect. Check the details.
1) When you look at the “0” in the part number, the originals are more oval on the top and bottom, not as pointy.
2) Check the rivet. Not all the reproductions are concave on the staked end of the rivets; some are flat, not like the originals.
3) On some reproductions, the stakes are too large and go into the concave area on the rivet.
4) Not all the reproductions have the correct size rivet head; some have a smaller/thicker rivet head.

Please email me chuck.vedra@yahoo.com with parts you want or if you want pics/additional details. Please include the box # so I can find the parts easily. Quantity is 1 ea. unless specified (i.e.; pair, set, etc.)

Please do not PM me here as I don't look at my PMs very often. If you don't see it here, send me an email with your wanted parts. I'll let you know if I have it...

**Cash or Postal Money Order only.**

Prices are plus shipping.

If you are looking to trade (willing to trade up/down), I'm looking for:
#102 Jack hook for a 71 Challenger
Front and Rear Challenger Rubber Bumpers
Challenger Rear Window Louvers
Other cool stuff for a 71 Challenger...what do you have???

****THANKS MOPARTS!!!****
Posted by: Scotts72Rallye

Re: E Body - Parts For Sale - 4th Quarter - 10/05/17 07:22 AM

Dodge, Plymouth A-727 318,340,360 transmission dust/gravel shield. Includes the always missing inspection hole cover.$90 shipped in the lower 48 states. PM here if interested. Thanks
Posted by: Scotts72Rallye

Re: E Body - Parts For Sale - 4th Quarter - 10/05/17 07:23 AM

The good:
I purchased this Made in Canada Spectra Premium 72-74 Dodge Challenger Fuel Gas Tank CR8D on Ebay for $146.50. I then took it to a local powder coater and spent $106.00 to have it powder coated silver. $252.50 total investment!

The bad:
When it was being baked in the oven the fuel vapor lines dropped. They flop around now since the lead holding them in place melted. I don't have the time, patience or skills to fix or modify the tank for use. If you want to pull the lines and fill the holes the location of them is not visible from the road and no one will ever see the repair. Maybe just vent at the cap or wherever you wish.

Only asking $100 for the tank plus $40 for shipping anywhere in the lower 48 states. PM me here if interested, thanks!
Posted by: moparphilll

Re: E Body - Parts For Sale - 4th Quarter - 10/05/17 05:20 PM

1970 340 Cuda manual dual point Distributor
Nice Tag!
3438317 part #
IBS 4018 date code 5-0

turns freely
$170 plus $18 shipping
moparphilll@aol.com
Posted by: moparply

Re: E Body - Parts For Sale - 4th Quarter - 10/05/17 06:59 PM

Original 1970-71 Challenger Cuda Rallye Wheel trim rings, 15 x 6 1/2, $50 pair.

Email Kenei@comcast.net
Posted by: moparphilll

Re: E Body - Parts For Sale - 4th Quarter - 10/05/17 07:08 PM

OEM E body Radio Surround bezels

$35 each plus shipping

moparphilll@aol.com
Posted by: moparphilll

Re: E Body - Parts For Sale - 4th Quarter - 10/05/17 07:11 PM

E-body Heater control Bezel

$45 each

moparphilll@aol.com
Posted by: moparphilll

Re: challenger hood letters - 10/06/17 12:14 AM

Rear defroster setup Works
$95 plus shipping
Fargo ND 58047
moparphilll@aol.com
Posted by: moparphilll

1970 Cuda/Barracuda Grille parts - 10/06/17 07:30 AM

Have two boxes of various 1970 Grille PARTS
$5-$20
email needs
moparphilll@aol.com
Posted by: moparphilll

Re: 1973-4 Cuda/Barracuda Tail panel - 10/06/17 07:39 AM

1973-4 Barracuda/cuda Tail panel

OEM removed at spot welds

$275 plus shipping
moparphilll@aol.com
Posted by: xs29j8

Nice pair of original 1970/71 road lamps - not reproductions - 10/06/17 04:17 PM

Here is a nice set of original 1970 / 1971 'Cuda Road Lamps which need rest rotation, but are not crunched or rusty. Both included brackets are for right hand (passenger) side, and some of the assembly hardware is missing. Price I ncludes two new amber bulbs, but clear bulbs can be substituted for $50 more.

Price with new amber bulbs - $250 plus $25 shipping within mainland US

Price with new clear bulbs - $300 plus $25 shipping within mainland US

Allen. xs29j8@charter.net
Posted by: kentj340

E-Body Pure Zinc Interleaves for Leaf Spring Rebuild - 10/06/17 10:59 PM

All interleaves are made from 99.5+% pure soft zinc sheet, same as the originals.

#E4 – Exact reproduction of the 10 pure zinc interleaves that came in the 024/034 factory springs for 426, 440 and other engines with axle packages, $77.30.

#TA – Exact reproduction of the 8 pure zinc interleaves that came in the factory springs for AAR/TA, $61.85.

#E8 – Car set of 8 pure zinc interleaves for springs with 4-1/2 steel leaves each side, $61.85.

#EC – Car set of pure zinc interleaves custom made to exactly reproduce your old zinc using information you provide, $77.30 for 10, $61.85 for 8.

#XL – One pure zinc interleaf, long, $7.73. Order two for springs with one extra leaf each side.

Add shipping by USPS Priority mail $13.60 per car set.

Contact kjohnst at postal dot net.
Posted by: moparlouie

Re: E Body - Parts For Sale - 4th Quarter - 10/07/17 09:07 AM

Just Rebuilt 23 spline dual mount trans, clear coated for protection. Build date 3744 (oct 28 71) Date on pic is not correct, just got back from shop 10/1/17. $1000 plus shipping. lafrancebiglou@aol.com
Posted by: moparlouie

Re: E Body - Parts For Sale - 4th Quarter - 10/07/17 09:23 AM

Mint original Hemi Dual Quad Air cleaner, $700 plus shipping/insurance. lafrancebiglou@aol.com
Posted by: moparply

Re: E Body - Parts For Sale - 4th Quarter - 10/07/17 11:18 PM

NOS 1970 Dodge Challenger Non Rallye fuel gauge, excellent condition in the original Chrysler box dated 6-1969, $150

NOS Chrysler rear shocks, both stamped part number 3400620, excellent condition, $150 pair

Email Kenei@comcast.net
Posted by: Speed Demon

Re: E Body - Parts For Sale - 4th Quarter - 10/08/17 08:43 PM

NOS 1972 thru 1974 Cuda Grille mouldings.

Part# 3573484 on both packages.

Excellent condition, with no broken studs.

$275.00 shipped and insured

PM me here or email Tensec318@comcast.net
Posted by: moparply

Re: E Body - Parts For Sale - 4th Quarter - 10/09/17 12:57 PM

NOS 1970 1972-74 Cuda headlights, GE 6014, excellent condition in their original box's, $25 pr

Original 1970-71 Challenger Cuda rebuilt alternator, part number 3438172, assembly dated 11-1970, $400


Email Kenei@comcast.net

Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 10/10/17 03:35 PM

A NEW PRODUCT!!

The Rare And Hard To Find #2658456, #2863260, And #3462107 Clutch Fan Drive Units Are Now Available As A New Reproduction.


These Were Used On 1966 Through 1972 B-Body, E-Body And C-Body Cars With Air Conditioning

These Are Commonly Missing Or Worn Out, Loose And Wobbly.

These Appear Like The Originals

They Are Very Affordable At $200 And In Stock At Tony’s Parts

tonysparts.com
Please Email Through Website

302-398-0821

Harrington Delaware 19952
Posted by: azvcmc69

Re: E Body - Parts For Sale - 4th Quarter - 10/10/17 03:40 PM

1970-71 Challenger Power hood.
OEM hood.
Missing inserts.

Arizona NO RUST hood

$295.00 plus shipping by Greyhound Bus Freight.

I cannot seem to post pictures so e-mail me and I'll send pictures if you are really interested in buying it.

azvcmc69@gmail.com
Posted by: miamivice

Re: E Body - Parts For Sale - 4th Quarter - 10/10/17 03:56 PM

426 Hemi Shaker Baseplate

Original, has been blasted and primed. Needs some work for a show car, or just paint and install for a driver.

I am looking for a 440 4bbl baseplate for my car, so open to either a trade OBO for this so I can get either an original or reproduction one for my 440 setup.

[img]https://scontent-sea1-1.xx.fbcdn.net/v/t...amp;oe=5A79A13E[/img]

[img]https://scontent-sea1-1.xx.fbcdn.net/v/t...amp;oe=5A81A480[/img]

knight82ta at yahoo dot com
Posted by: convertcuda

Re: E Body - Parts For Sale - 4th Quarter - 10/10/17 06:16 PM

New Cuda Convertible Quarters 2300.00

New Challenger Convertible Quarters 2400.00

Thousands of e-body convertible parts for sale ranging from 5.00 to 25,000 depending what you need.



Made to factory specs. Contact Ken 715-432-5080 or convertcuda@gmail.com
Posted by: gtx6970

Re: E Body - Parts For Sale - 4th Quarter - 10/10/17 06:51 PM

FOR SALE - OEM Parts manuals
All are believed to be 100% complete.

I can get individual pictures if needed.
1962 manual - $150
1963 manual - $150
1966 manual - $175
1967 manual - $200
1969 manual - $250 ( not shown )
1970-71 manual - $350
1972 manual - $200
--------------------
Total - $1425

Willing and would actually prefer to make a deal on them all in one hit if your interested. $1200 for them all - freight not included no matter how many purchased. Freight will be figured on an individual basis. These things are not light so keep that in mind.

pm me here, I'll be notified
Posted by: gtx6970

Re: E Body - Parts For Sale - 4th Quarter - 10/10/17 06:54 PM

NOS E body AC discharge hose and line. This is for a small block car
Its not had the best storage so its not flawless condition. But is is brand new mopar part
part number on the crimp is 3502382 dated 135 - 2

SOLD
Posted by: 71yelladustr

Re: E Body - Parts For Sale - 4th Quarter - 10/11/17 09:33 AM

70 E body original Hurst pistol grip shifter setup. Push in style handle with new grips installed. Will include original grips. Comes with like new boot, bezel, and all original linkage. nice shape. $500+ shipping. Pm or call/text (573) 433-0192. Thanks.
Posted by: moparply

Re: E Body - Parts For Sale - 4th Quarter - 10/11/17 01:22 PM

Original 1970-71 Cuda Convertible parts:

Original 1970-71 Challenger Cuda convertible top rear window, excellent original Chrysler glass, $395

Original 1970-71 Challenger Cuda convertible power top pump lines, correct factory lines and fittings, $50


Email Kenei@comcast.net
Posted by: LemonTwiist

BIG BLOCK/SMALL BLOCK 8 BOLT FLYWHEEL NEW - 10/11/17 06:00 PM

FOR SALE: This is a brand new never used flywheel for a big block or small block Mopar. Part number is P4529143. It is for a 10-1/2" clutch and has 130 teeth for starter. It is also an 8 bolt setup for an 8 bolt crank. Original price is $348.00. Will sell for $185.00 Weight is 30 lbs. Postage to be determined based on distance.

Posted by: LemonTwiist

MOPAR AAR CUDA. CHALLENGER, CHARGER, ROADRUNNER SAGANAW POWE - 10/11/17 06:04 PM

FOR SALE: Used power steering pulley for a small block Mopar in good condition. This was used on Saganaw pumps. PRICE $50.00 Postage to be determined based upon distance
Posted by: LemonTwiist

NOS 1970 CHALLENGR T/A 340 SIX PAK FENDER DECALS - 10/11/17 06:31 PM

FOR SALE: NOS Challenger T/A front Fender decals. These are brand new and have never been installed. These came as an extra with a T/A I restored several years ago. They are original 3M paper reflective pieces as original. PRICE $125.00 Postage $4.00
Posted by: LemonTwiist

1970 - 74 CHALLENGER PASSENGER SIDE WINDOW REGULATOR - 10/11/17 06:36 PM

FOR SALE: Original drivers side rear window tracks and anchor plate. All attaching screws and adjusting hardware included. Very good condition. PRICE $25.00 Postage to be calculated after purchase.
Posted by: LemonTwiist

1970-71 CUDA OR CHALLENGER GLOVE BOX DOOR - 10/11/17 06:44 PM

FOR SALE: Very nice glove box door for 70-71 Cuda or Challenger. It has been cleaned and all paint removed Paint it to the color of your interior. It may fit other years so do you homework before purchasing. PRICE $20.00 Postage $9.00

Posted by: bremotorsports

Re: 1970 GRAN COUPE DOOR EMBLEMS - 10/11/17 08:39 PM

Chrysler Parts/Certified Car Care Shop Thermometer 60's-70's.

Truly a desirable piece for "The Man Who Has Everything".

Fully functional of course.

200.00 plus shipping

Bill Rolik

bremotorsports@verizon.net

201-394-5533 Cellular

PayPal preferred.
Posted by: bremotorsports

Re: 1970 GRAN COUPE DOOR EMBLEMS - 10/11/17 08:43 PM

Chrysler Parts/Certified Car Care Service Dept. Key Holder

The only example I have ever seen. Certain to get oooh's and aaah's from your friends!!!

200.00 plus shipping.

Bill Rolik

bremotorsports@verizon.net

201-394-5533 Cellular

PayPal preferred.
Posted by: dart4forte

Re: E Body - Parts For Sale - 4th Quarter - 10/11/17 08:48 PM

I have a set of 1970 E body black seat belts. These belts sold new from BE&A for $445.00. Bolts and hardware not included. These belts were never installed. The owner decided to go in another direction. This is a good set to put into a street driven everyday driver.

$350 plus $18.95 shipping


Mesa AZ
Posted by: davesmopars

E Body Big Block Bell Housing - 10/12/17 07:44 AM

E Body Big Block Bell Housing
casting number 2892513
in great shape
395.00 plus shipping
Posted by: davesmopars

E Body steering wheel - 10/12/17 08:03 AM

E Body Black Steering Wheel
in nice shape
150.00 plus shipping

**wood wheel sold**
Posted by: davesmopars

70 71 Cuda Challenger convertible switch and panel - 10/12/17 08:15 AM

70 71 Cuda Challenger Barracuda convertible top switch and Dash panel assembly
really nice shape
Convertible Top Dash cluster panel in great shape 3488406
Convertible Top Switch 2947406
Wiper washer switch 2770380
Headlight switch 2947305
Dimmer switch 294713
550.00 or best offer
davesmopars@yahoo.com
Posted by: davesmopars

E Body Rally Dash Light Bar - 10/12/17 08:20 AM

E Body Rally Dash Light Bar
in nice shape
125.00 plus shipping


****sold****
thanks
Posted by: davesmopars

Cuda Barracuda Interior Trim - 10/12/17 08:46 AM

Barracuda Cuda Interior Trim I Have A Green Set and a Tan Set from 70 or 71 but should be the same for all up to 74
The tan set just showing the rear window in the picture but It is complete set.
Front windshield, side headliner with clips and rear window
200.00 for a complete set plus shipping
PM me here
Posted by: davesmopars

E Body Hurst Super Shifter - 10/12/17 03:47 PM

E Body Hurst Super Shifter
lock out reverse push down to engage
correct rods and levers
correct mounting bracket
***sold***
Posted by: gtx6970

Re: E Body - Parts For Sale - 4th Quarter - 10/12/17 04:17 PM

E body ignition module mounting bracket. Used original $20 plus postage

pm me here, I'll be notified via email
Posted by: gtx6970

Re: E Body - Parts For Sale - 4th Quarter - 10/12/17 04:22 PM

Front Side Marker lense pkg 1970 Cuda / barracuda
Everything is brand new. 1st time out of the box was for these pictures. These are the reproductions formally avail from BEA . Bought them not knowing already had another set.
$75 postage not included. Price is for the set as shown. PM me here, I'll be notified via email



Posted by: gtx6970

Re: E Body - Parts For Sale - 4th Quarter - 10/12/17 04:34 PM

Hood latch assembly. I'm pretty sure its 1970 Barracuda / Cuda only

pm me here, I'll be notified via email

SALE pending
Posted by: moparply

Re: E Body - Parts For Sale - 4th Quarter - 10/13/17 02:51 PM

NOS 1970-71 Cuda Challenger factory correct Hemi spark plugs, Champion N-10Y still sealed in their original packages. set of 10 in the early Champion Red/Black print rectangular box, $75

Original Champion Promotional Spark Plug, measures 22" tall, excellent condition, $100


Email Kenei@comcast.net
Posted by: 5carguy

Re: E Body - Parts For Sale - 4th Quarter - 10/13/17 05:20 PM

For Sale is a new Year One reproduction fiberglass hood for an AAR or Cuda.In very nice condition with a little shelf wear.$550.00 plus shipping.I can deliver this to the Don Garlits show in Nov.in Ocala.
I also have a pair of lt.and rt. 70-71 Challenger doors.These doors are in nice shape and complete with all hardware including glass.$250.00 each pick up only or free delivery to Don Garlets show in Nov.I have many E body parts for sale.LMK

PM here or Rtroyer1@comcast.net
Thanks for the ad Moparts
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/14/17 02:17 PM

One pair of Good Year E60-15 RWL polyglas GT tires, these are original not reproduction, they are in excellent used condition, no cracking on the side walls, the tread is perfect, on a scale of 1 to 10 I would call these a 9 $1500.00 for the pair, the aluminum slot mags are a freebe (708)288-2879 Scott
Posted by: moparply

Re: E Body - Parts For Sale - 4th Quarter - 10/15/17 10:16 AM

NOS 1970-71 Challenger Cuda oil filter. Correct sand textured top, mint condition in the original Chrysler box. This filter was manufactured in 1970, this is not a later reproduction. $250



Email Kenei@comcast.net
Posted by: Crycho

Re: E Body - Parts For Sale - 4th Quarter - 10/15/17 11:20 AM

Super rare 1970-71 Dodge challenger door guards, OEM need polishing but not bent or damaged. $180.00
Posted by: junkyardmaxie

Re: E Body - Parts For Sale - 4th Quarter - 10/15/17 09:01 PM

valve cover breather 1971 only 3 tube excellent no dents .$60. plus shipping
Posted by: vinnyd76

Various 1970 and 1971 E-Body Parts - 10/16/17 09:13 AM

E-Body Parts (quite a few convertible parts)
1. Original Tail Panel with tail lamps: $575 for the set
2. Challenger Head Lamp Buckets NOS: $125 for the pair
3. Original 70 Cuda Park/Turn Signal Light Assemblies: $300
4. White Armrest without base: $25
5. Black Armrest with base: $45
6. Original door locks: $50
7. 71 Challenger right side headlamp bezel: $225
8. E-Body tinted quarter glass: $275 each
9. E-Body clear quarter glass: $175
10. E-Body foot pedal wash fluid pedal with hose: $35
11. E-Body 3-spoke steering wheel horn ring switch works mounting base needs slight repair:SOLD as of 10-18-17
12. E-Body gas pedal dress up: $45
13. New ‘Cuda-340 emblem: $60
14. 1970 right hand side mirror base: $75
15. 1970 E-Body master cylinder cover: $25
16. Under dash switch holder: $10
17. E-Body underhood installation pad clips: $25.00
18. Convertible door spacers on read edge of door – 2 per car: $20/set
19. Plymouth hood emblem – NOS: $95.00
20. Cuda rear bumper guard brackets – LH/RH: $35
21. Challenger rear bumper guard brackets – LH/RH: $35
22. New jounce hose: $20.00
23. E-Body reproduction interior door handles: $55
24. E-Body ashtray and bezels: $35.00
25. Complete set of white used Legendary front and rear seat covers for a 1971 convertible: $300
26. 70 Cuda jack assembly holding brackets: $70
27. E-Body master cylinder (manual brakes) gasket: $5.00 each

Some of the parts in the pictures have sold to date, but the list is up to date.

Location: Metro Detroit

Open to offers... no longer require these parts.
Posted by: JoshsMuscleCar

Re: E Body - Parts For Sale - 4th Quarter - 10/16/17 03:49 PM

Josh's Muscle Car Parts October Specials

1971-1974 Barracuda Dash Emblem Assembly $33.43 With Code PHIL At Checkout.

Josh's Muscle Car Parts reproduction of the original dash emblem with an insert designed for 1971-1974 Barracuda models. Features the correct silver font on a black ribbed background with a plastic bezel that mounts with studs as the original. Includes mounting hardware.
Mopar Authentic Restoration Product

https://www.musclecarparts.cc/shop/item.aspx/1971-74-barracuda-dash-emblem-assembly/3156/


Moparts Forum members save with coupon code PHIL at checkout.
See these and many more parts at our website www.musclecarparts.cc
Posted by: 70gtx440dana

70-71 Challenger 45.60 drive shaft - 2883656 - 10/17/17 08:30 AM

I have a very nice 2883656 70-71 Challenger ( 340, 383, 440, 440-6 & 426 Hemi??? )drive shaft. 45.60" long with 7290 U joint. Also includes factory slip yoke on front end. Part number and date code "L9" are visible as this shaft has very light surface rust. Correct for auto and manual trans with 8.75 rear end. Should restore to concourse condition. $250/BO + shipping from MI 48837. Joe 517-243-7115 or jsawyer@wowway.com
Posted by: moparply

Original Challenger Cuda Parts - 10/17/17 09:34 AM

Original 1970-71 Challenger Cuda convertible power top pump lines, excellent condition, $50

Original 1970-71 Challenger Cuda convertible top rear window, factory glass, excellent condition, $400

Original Challenger Cuda lower dash corner, factory burnt orange panel in mint condition, $150

Original 1970-71 Challenger Cuda alternator, part number 3438172, assembly dated 11-1970, rebuilt assembly, $400

NOS Challenger Cuda rear shocks, stamped part number 3400620 on both shocks, both stamped 1969 matched dated, assembly line shocks in original Chrysler box's, $150 pair

NOS 1970-71 Challenger Cuda Hemi spark plugs, N10-Y, set of 10, $75


Email Kenei@comcast.net
Posted by: KOS

Re: E Body - Parts For Sale - 4th Quarter - 10/17/17 10:24 AM

72-74 ebody wheel and 70-6pak air cleaner lid.$50 for the wheel in GC and $80 for the lid also in GC.paypal ok.PM me
Posted by: gonzomcode

70 CHALLENGER PARTS - 10/18/17 08:05 PM

Complete AC from dash to compressor $800
. and tinted glass $500 . i have a parts car . email me with needs all moldings '
vinyl top car . gonzo360@comcast.net [img]http://[/img] [color:#FF6666][/color] [img:center]20171018_114955[/img]
Posted by: davesmopars

E Body 70 8 3/4 Dana spring shock plates 3400836 3400837 - 10/18/17 10:09 PM

E Body 70 8 3/4 Dana spring shock plates 3400836 3400837
Heavy Duty suspension
175.00 plus shipping
Posted by: davesmopars

1970 E Body E brake mechanism - 10/18/17 11:17 PM

1970 E Body E brake mechanism
This super nice missing the little handle
defiantly off a low mileage car
***sold***
Posted by: davesmopars

340 six pack nos throttle bracket - 10/18/17 11:24 PM

340 six pack nos throttle bracket
90.00 plus shipping
Posted by: davesmopars

E Body rear offset Hangers - 10/18/17 11:27 PM

E Body offset front hangers
***sold***
Posted by: moparply

Re: E Body - Parts For Sale - 4th Quarter - 10/19/17 01:01 PM

NOS 1970-71 Cuda Challenger windshield wiper arm retaining clip. This is the stainless steel retaining clip that is commonly missing. Mint NOS condition. $50

Email Kenei@comcast.net
Posted by: Maxwedgesavoy

Re: E Body - Parts For Sale - 4th Quarter - 10/19/17 04:56 PM

Email me at 68firebird@live.com if interested in any of the following things.

(1) LH Barracuda outer door handle - 20
(3) RH Barracuda outer door handle - 12 each
(4) RH Challenger outer door handle - 12 each
(2) LH 71-74 Barracuda Inner door handle - 7 each
(1) RH 71-74 Barracuda Inner door handle - 7
(1) RIGHT REAR 70 Challenger Marker Light Complete - 20
(4) 71-74 Challenger Script Emblems Stick On Type - 12 each
(3) 71-74 Barracuda stick on emblems - 15 each
(3) 71-74 Barracuda pin emblems - 15 each
(1) 1970 Challenger Grill emblem - 25
(1) 70-74 Challenger fender emblem - 15
(1) 383 Magnum Challenger Rallye Hood Emblem (2 pins) - 40
Posted by: moparphilll

Re: E Body - Parts For Sale - 4th Quarter - 10/20/17 07:34 PM

E body Original lower seat in red hounds tooth
$85 plus shipping
moparphilll@aol.com
Posted by: mccannix

426 Hemi Federal power steering cooler, TA/AAR original - 10/21/17 07:38 AM

These are not currently in reproduction, so finding an original in any condition can be a task.
This original cooler is in exceptional condition save for minor pits on one tube ( an easy fix).
****SOLD***Thanks Moparts
Terry
Posted by: mccannix

1971 Plymouth original trouble shooting contest trophy - 10/21/17 07:54 AM

If you were lucky enough to be involved in one of these trouble shooting contests back in the day, you may have seen one of these awards.
Has a bit of flaking but is after all close to 50 years old, but how many have you seen in any condition.
71 Cuda model on top.
Own a piece of historical memorabilia
****SOLD****Thanks Moparts
Posted by: mccannix

NOS Cuda Challenger 340 ps hose 2891371 - 10/21/17 08:03 AM

NOS Power steering hose for small block E body cars.
Has some oxidation but is NOS for and number confirms for 1973 models, part number 2891371,
$65.00 shipped in the USA to your door
Call Terry 613-382-3550, pm or email mccannix@cogeco.ca
Posted by: Little Detroit

Re: NOS Cuda convertible 1/4 panel - 10/21/17 09:56 AM

The last NOS 1970-71 Cuda convertible 1/4 panel for sale. mint condition been in dry storage last 15 years. left side ,drivers side. $15,000.00, some partial trades possible. 304 797 0607
Posted by: Little Detroit

Re: Challenger convertible 1/4 panel interior panels - 10/21/17 10:23 AM

power window rear interior panels for convertible challenger, no chalking or scratches . best panels I have seen in years.$3000.00 304 797 0607
Posted by: littleredcoffin

71-74 non rally gauge plastic bezel - 10/21/17 12:42 PM

Good shape for the age $9,call only 603 209 1678.pay by us postal money orders
Posted by: littleredcoffin

73-74 challenger rear bumper filler corners - 10/21/17 12:46 PM

73-74 challenger rear bumper filler corners,good usable shape
$15pr,call only 603 209 1678.payment by us postal money order only
Posted by: littleredcoffin

automatic console top plate - 10/21/17 12:48 PM

71-74 automatic console top plate.good but not perfect shape $9,call only 603 209 1678 pay by us postal money orders
Posted by: littleredcoffin

drivers side under dash air vent - 10/21/17 01:00 PM

drivers side under vent.Has a tiny pinhole in the baffle..100% usable as is.$10,call only 603 209 1678,pay by us postal money orders
Posted by: littleredcoffin

70-72 cuda bumperette fillers - 10/21/17 01:06 PM

70-72 cuda rear bumperette plastic filler covers..Good shape $10pr,call only 603 209 1678 pay by us postal money orders only
Posted by: littleredcoffin

rear sway bar plates - 10/21/17 01:08 PM

rear swar bar plates..some rust,but still usable.$15pr,call 603 209 1678 only call....pay by us postal money orders only
Posted by: littleredcoffin

73 challenger hood release and radio bracket - 10/21/17 01:20 PM

release works fine $12,radio bracket $10.call only 603 209 1678,pay by us postal money orders only
Posted by: littleredcoffin

70-71 rally steering wheel horn pad and cover - 10/21/17 01:22 PM

pad is clean,cover is as well.$20pr,call only 603 209 1678,pay by us postal money orders only
Posted by: littleredcoffin

clean console door hinge $7 - 10/21/17 01:25 PM

Clean works fine $7,call only 603 209 1678 pay by us postal money orders only
Posted by: littleredcoffin

CUDA exhaust tips - 10/21/17 01:56 PM

`cuda tips,some rust holes still work fine.$10pr,calls only 603 209 1678.pay by us postal money orders only
Posted by: littleredcoffin

72-74 upper lower grille support brace - 10/21/17 02:01 PM

Has 2 small weldable cracks,otherwise real clean $15,calls only 603 209 1678 pay by us postal money orders only
Posted by: mccannix

72-74 Cuda Challenger rallye dash bezel NOS - 10/21/17 03:39 PM

I believe this to be an NOS factory rallye dash bezel for 72-74 E-body.
It is in the Mopar box that says BEZEL but tag is half gone.
Not a reproduction as pictures attest to.
Mounting tabs look to never have been folded over.
One minor imperfecton on corner prevents this from being a 10.
Priced reasonably compared to reproductions of over $275.00
$135.00 buys this original one.
Call Terry 613-382-3550, pm, or email mccannix@cogeco.ca
Posted by: mccannix

Re: 72-74 Cuda Challenger rallye dash bezel NOS - 10/21/17 03:45 PM

More pictures of bezel..
Posted by: littleredcoffin

CHALLENGER EYEBROW TRIM - 10/22/17 09:29 AM

OK SHAPE.GOOD FOR IF THEY ARE MISSING OR A DRIVER.$5PR,CALL ONLY 603 209 1678,PAY BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

CHALLENGER ARMREST PADS NICE - 10/22/17 09:31 AM

BROWN ARMREST PADS FOR CHALLENGER..GOOD SHAPE $12PR,CALLS ONLY 603 209 1678.PAY BY US POSTAL MONEY ORDERS
Posted by: littleredcoffin

CHALLENGER INTERIOR DOOR PLAQUES - 10/22/17 09:34 AM

CHALLENGER DOOR PANEL PLAQUES..WOOD GRAIN IS DESCENT,,MINOR PITS.$15PR,CALLS ONLY 603 209 1678.PAYMENT BY US POSTAL MONEY ORDERS
Posted by: floyd

72-74 Challenger Rallye Fender Louvers - 10/22/17 12:18 PM

Nice original set. One stud missing on RH louver.

$100 for the pair plus shipping.

Thanks!

PM or email: musclesigns AT comcast DOT net
Posted by: mopars4life

Fan Shroud - Mopar B & E Body - 10/22/17 01:32 PM


1970-72 B and E body 26” Shroud. This is a newer Mopar repro I believe. Looks brand new.
P2998326 - $100 takes it plus shipping. moparsforlife@hotmail.com
Posted by: mopars4life

1970-1972 B and E body radiator – 26” - 10/22/17 01:34 PM

1970-1972 B and E body radiator – 26”
It came with my super bee and I believe was on it for a bit but doesn’t appear to have had much use as the inside is real nice. It was off the car when got it and my car had a 22” radiator from the factory. It’s a HD 3 core. I can water test for anyone interested prior to selling $200 takes it plus shipping. Needs some minor detailing. moparsforlife@hotmail.com
Posted by: bremotorsports

Re: 1970-1972 B and E body radiator – 26” - 10/22/17 07:56 PM

NOS 2984120 Temperature Gauge

70-74 Cuda with Standard (Non-Rallye) Instrument Panel

75.00 plus shipping.

Bill Rolik

bremotorsports@verizon.net

201-394-5533 Cellular

PayPal preferred.
Posted by: bremotorsports

Re: 1970-1972 B and E body radiator – 26” - 10/22/17 07:59 PM

Champion N-9Y Spark Plugs for 340, 68-73.

These are what was installed in your engine on the assembly line.

40.00 for the set of 8, plus shipping.

Bill Rolik

bremotorsports@verizon.net

201-394-5533 Cellular

PayPal preferred.
Posted by: bremotorsports

Re: 1970-1972 B and E body radiator – 26” - 10/22/17 08:06 PM

Nice used 6138 Thermoquad. Original application 72 340 Manual.

Complete unit. Idle mixture screws are NOT frozen.

250.00 plus shipping.

Bill Rolik

bremotorsports@verizon.net

201-394-5533 Cellular

PayPal preferred.
Posted by: bremotorsports

Re: 1970-1972 B and E body radiator – 26” - 10/22/17 08:09 PM

Date Code is 226 9.

Thanks,

Bill Rolik
Posted by: moparply

Re: E Body - Parts For Sale - 4th Quarter - 10/23/17 09:00 PM

NOS 1970-74 Dodge Challenger and 71 Cuda GE headlights, (2) 4000 Low beam and (2) 4001 Hi beam, correct early design, excellent condition in original box's, $200 includes insured shipping.

NOS 1970-74 Dodge Challenger and 71 Cuda Westinghouse headlights, (2) 4000 Hi Beam and (2) 4001 Lo beam, correct early design, excellent condition in original box's, $150 includes insured shipping.

NOS 1970 72-74 Cuda GE 6014 headlights, excellent condition in original box's, $30 pr

Original Challenger Cuda lower dash bezel, factory burnt orange, 2984025, mint condition, $150

Original 1970 Challenger Cuda starter, correct for 340-383-440-Hemi, assembly dated 47th week of 1969, part number/date code stampings are very clear, some heavy rust pitting on barrel, $400


Email Kenei@comcast.net
Posted by: moparmarks

Re: E Body - Cude interior panels - 10/23/17 09:40 PM

Original Cuda black interior rear side panels for hardtop. Good drivers condition with no major damage or sun rot. They do have some scuffs and scratches especially on the front edge.
175.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body -71 Seat belts - 10/23/17 09:48 PM

Here is a set of 1971 seat belts. Good drivers condition. Have been cleaned. Couple of the rear metal parts has some pitting. Fronts are nice. Some of the tags are missing but no other damage. This set fits
convertible but may not be "correct".
250.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparmarks

Re: E Body - Convertible parts - 10/23/17 09:56 PM

Door wedge guilds. Real nice. 150.00pr
Top post brackets. 100.00pr
Mirror base. 50.00
Un-used reproduction top with plastic window. Brand unknown. 125.00
Plus shipping
Can email more pics and shipping quotes.
Take check, MO and PayPal.
Free delivery to the Fall Fling with prepaid.
Posted by: moparply

Re: E Body - Parts For Sale - 4th Quarter - 10/24/17 10:44 AM

NOS 1970 Cuda GE headlights, GE 6012, early wide flute style, excellent condition, $300 pr

Have one single headlight, $125

NOS Challenger Cuda Hemi engine wiring harness, mint condition in the original Chrysler box, very early harness, very rare.

Email Kenei@comcast.net

Posted by: moparphilll

Re: E Body - Parts For Sale - 4th Quarter - 10/24/17 09:38 PM

E body power steering boxes
$50 each plus shipping

Moparphilll@aol.com
Posted by: moparphilll

Re: E Body - Parts For Sale - 4th Quarter - 10/24/17 09:43 PM

radios AM/8 track
I believe they are C-body but would maybe work for parts $50 each plus shipping
moparphilll@aol.com
Posted by: moparphilll

Re: E Body - Parts For Sale - 4th Quarter - 10/24/17 09:58 PM

Torsion Bars from e-bodies $30 each
moparphilll@aol.com
Posted by: davesmopars

1970 Challenger parts car - 10/25/17 09:36 AM

1970 Challenger 318 Automatic console floor shift parts car
A/C system is complete
rear defrost
Tinted glass very nice
Really did stainless no dent or dings
real nice grill
and a lot more stuff
some stuff already take off but goes with car
radiator
shroud
some of the engine bay a/c stuff condenser and lines
Grill
tail lights
radio
I am sure I missed a few things off the car that goes with it
the car is rotted very bad
the car does roll tire hold air long enough to load
NO front bucket seats
pm me here
1800.00
Posted by: challenger6pack

Re: E Body - Parts For Sale - 4th Quarter - 10/25/17 11:15 PM

(SOLD)Ebody 4 speed pedal set. These will also fit the 71-74 Bbody. This set has been stored for 30 years. They are from a low mileage 1973 Challenger that at the time was not worth restoring. This is a nice set that really needs nothing. The pedals move as they should with no side to side movement. The bearings are not worn. The pedal pads are original without much wear. I'm asking $275 for them + actual shipping from south Florida. I can be reached by PM. Thanks. 
Posted by: 71redcuda

ORIGINAL "BY PLYMOUTH" FOR 1971 CUDA TAIL PANEL - 10/26/17 05:28 PM

Original "BY PLYMOUTH" emblem with the correct black background for 71 Cuda tail panel..

Super nice condition, its a NOS take off and is near mint.

See link: https://www.garaget.org/mypage/?page=gallery&user=106330&album=71193


PM or Email to: Nicklas-780@hotmail.com


525$ including shipping from Sweden. Paypal only.

Thanks
Nicklas

Posted by: davesmopars

2 1970 challenger parts cars or build - 10/28/17 12:21 AM

TWO 1970 challenger parts cars1970 Challenger 318 Automatic console floor shift parts car
A/C system is complete
rear defrost
inside hood release
Tinted glass very nice
Really did stainless no dent or dings
real nice grill
and a lot more stuff
some stuff already take off but goes with car
radiator
shroud
some of the engine bay a/c stuff condenser and lines
Grill
tail lights
radio
I am sure I missed a few things off the car that goes with it
the car is rotted very bad
the car does roll tire hold air long enough to load
NO front bucket seats
2nd factory disc brake car
rough needs work
3000 for both
until i fix my picture issue I can email pictures
Posted by: EV2 340

Re: E Body - Parts For Sale - 4th Quarter - 10/28/17 08:54 PM

For Sale ... E Body Woodgrain 3 spoke wheel, very nice condition, $149 plus shipping
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/28/17 10:47 PM

One pair of original "not repro" E-60 15 GoodYear polyglas GT tires excellent used condition, perfect tread on aluminum slots $1500.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/28/17 10:54 PM

Two 15X7 Ralley wheels correct for 1970 and 1971, part number 2944390, both wheels have the same date code 1-5-1970 $800.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/28/17 11:03 PM

One 15X7 steel wheel correct for 1970 and 1971, part number 2944450, date code 10-14-1969 $1500.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/28/17 11:19 PM

1971 to 1974 B-body and 1970 to 1974 E-body NOS shifter boot bezel, part #2996415 $150.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/28/17 11:26 PM

426 HEMI 727 torqueflite front drum, rear drum and brand new band, all parts are in excellent condition $750.00 for everything (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/28/17 11:28 PM

Two 15X7 Ralley wheels correct for 1970 and 1971, part number 2944390, both wheels have the same date code 5-1-1970 $800.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/28/17 11:50 PM

NOS in the box 1969 and up three prong neutral safety switch $60.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/28/17 11:59 PM

1970 to 1974 383, 400, 426 HEMI, 440 and 440 SIX PACK 10 1/2 inch bellhousing, casting #2892513, not cracked, I have ran a tap down all the threaded holes and there are no stripped threads, excellent used condition $400.00 (708) 288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 12:42 AM

Original 1970 440 SIX PACK 4-speed dual point distributor, The shaft is tight but spins freely, I have tested the vacuum advance, it pulls, I have installed a new lead wire, part #3438314, date code 44-9 $750.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 01:30 AM

One pair of 1971 426 HEMI 4-speed carbs, front carb ML9 4742 rear carb ML9 4745, excellent cores to restore $5500.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 01:35 AM

1970 426 HEMI front carb date code C0 4742 excellent core to restore $2500.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 01:42 AM

NOS 1970 and 1971 E-body and 1971 B-body drivers side motor mount insulator not repro, never been installed on a car, part #2951599 $475.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 01:47 AM

1970 426 HEMI rear carb #4746S, date code H9 for cars with automatic transmission, excellent core to restore $2500.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 01:51 AM

One pair of original "not reproduction" 1970 and 1971 426 HEMI valve covers that have been chrome plated, as you can see in the pictures the drivers side valve cover has had some repair at the back end $650.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 02:15 AM

Late 1969, 1970 and 1971 426 HEMI 2X4 inline intake manifold, as you can see in the picture it has had a repair on the bottom side, other than that it is in excellent condition $500.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 02:29 AM

NOS 1971 426 HEMI "B" and "E" body oval air cleaner base plate, never been installed on a car $1850.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 10:37 AM

1970 340 4-speed Carter AVS carb core to restore, #4933, date code K9, it has it's original idle stop solenoid and it's original carb tag $350.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 10:52 AM

1970 Dodge T/A Challenger hood, nice used original not reproduction $2250.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 10:55 AM

1970 383, 440HP, 440 SIX PACK and 426 HEMI 26 inch radiator #2998956, this is a used original radiator that will probably need recored, nice tanks, nice side straps $750.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 10:59 AM

1970 to 1974 Dodge Challenger flip out gas cap and trim ring, the gas cap is NOS and has never been installed on a car, the trim ring is nice used $400.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 11:04 AM

1970 E-body Chrome remote drivers door mirror NOS in the box, never been installed on a car, part #3508987 $450.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 11:05 AM

One pair of NOS 1970 E-body mirrors in primer for cars that have painted mirrors, never been installed on a car $900.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 11:08 AM

1970 "B" and "E" body NOS upper radiator hose, not reproduction for 383, 440 and 440 SIX PACK cars with 22 inch radiator, part #3462114 $275.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 11:12 AM

One pair of used 1971 Plymouth Cuda and Barracuda front turn signal assemblies, these are what I would call cores to restore, as you can see in the pictures one of the ends is missing on one of the pig tails $250.00 for everything (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 11:21 AM

NOS 1970 and 1971 Dodge 426 HEMI non shaker hood emblems, these are the real deal, correct brushed finish, not chrome $250.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 11:43 AM

1970 and 1971 E-body Rallye instrument cluster and switch panel in need of restoration, as you can see in the pictures the gauges are in poor condition, the plastic lens is not cracked but will need polishing, also included are new reproduction face plates for both the gauges and the switch panel $900.00 for everything (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 11:50 AM

1970 E-body Dodge and Plymouth 340 and 340 SIX PACK 26 inch radiator, part #2998974, I have not had this radiator tested, selling as is $450.00 (708)288-2879
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 12:03 PM

1970 and 1971 E-body rallye instrument cluster assembly with dash bezel, switch panel bezel and rallye cluster light bar, all gauges have been bench tested and the clock has had quartz movement installed $1350.00 for everything (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 12:09 PM

1970 and 1971 Dodge Challenger passenger side front fender not rusty $650.00 (708)288-2879 Scott
Posted by: Speed Demon

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 12:33 PM

1970 1971 E body rallye dash switch panel. Very nice used condition, with the 70-71 3 speed wiper motor switch. No cracks, repairs or broken areas.

$275.00 shipped

PM me here or email me at Tensec318@comcast.net
Posted by: domingo

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 01:06 PM

Challenger Convertible rear interior panels.

Recovered by just dashes.

Never installed.

Price $1500 OBO

paypal

domingo426@gmail.com
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 02:00 PM

1970 and 1971 440 SIX PACK base plate and lid $550.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 02:14 PM

Original Edelbrock 340 SIX PACK intake manifold from a Dodge T/A Challenger or an AAR Cuda, nice used condition $950.00 (708)288-2879 Scott
Posted by: chrisnben

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 02:20 PM

1970-1974 Cuda parts:

'70 Rear seat pair needing recovering- original red. $100

E-body heater plenum- complete, clean, working blower & cables. $200

E-body pair of 10" front drums. $25

E-body Standard gauge cluster & bezel in nice condition. All gauges work as they should $75

Message me here, thanks.
Posted by: bremotorsports

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 02:42 PM

2951984 NOS Power Steering Belt 70-72 340

60.00 Plus shipping

Bill Rolik

bremotorsports@verizon.net

201-394-5533 Cellular

PayPal preferred.
Posted by: bremotorsports

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 02:47 PM

2095501 Ballast Resistor

Fits virtually any Mopar without Electronic Ignition.

The is a real assembly line piece and NOT a reproduction!!!

100.00 plus shipping. Only two left!

Bill Rolik

bremotorsports@verizon.net

201-394-5533 Cellular

PayPal preferred.
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 05:00 PM

1969, 1970 and 1971 NOS 426 HEMI water pump pulley, never been installed on a car, part #2946716 $350.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/29/17 05:05 PM

1969, 1970 and 1971 426 HEMI oval air filter NOS in the box, this is the real deal, never installed on a car $650.00 (708)288-2879 Scott
Posted by: JoshsMuscleCar

Re: E Body - Parts For Sale - 4th Quarter - 10/30/17 03:23 PM

Josh's Muscle Car Parts October Specials

1970-1974 Plymouth Barracuda Rear Tail Panel Trim - 3 piece package $189.14 With Code PHIL At Checkout.

Factory-style replacement rear tail molding set for 1970-1971 Barracuda Gran Coupe and 1972-1974 Barracuda models. This three piece set of moldings have been buffed and sealed with an anodized clear-coat solution to achieve the proper finish. Mounting hardware is not included and is available separately. Made in the USA.

https://www.musclecarparts.cc/shop/item....e-package/1809/


Moparts Forum members save with coupon code PHIL at checkout.
See these and many more parts at our website www.musclecarparts.cc
Posted by: n96cuda

Re: E Body - Parts For Sale - 4th Quarter - 10/30/17 04:52 PM

Aar t/a #52 k frame. $400

765-618-2037
Ebodyjoe@aol.com
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/30/17 06:54 PM

1970 440 HP single point distributor, part #3438222, date code 44 9, this distributor is in excellent used condition, I have tested the vacuum advance, it pulls, the lead wire is in good condition $375.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/30/17 07:17 PM

One pair of brand new in the box BE&A 1970 Plymouth Cuda and Barracuda reproduction tail lite chrome trim, never been installed on a car $200.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/30/17 07:42 PM

1971 and 1972 B and E body Gull Wing spoiler, the spoiler it's self is original and in excellent condition, the legs are reproduction from Dales Cuda shop, $575.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/30/17 07:57 PM

1970 to 1974 Plymouth Cuda and Barracuda rear window louvers, reproduction in excellent used condition, hardware included $650.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/30/17 09:25 PM

1972 and 1973 318 and 340 Aluminum 10 1/2 inch 4-speed bellhousing, casting #3515734, excellent used condition, not cracked, I have ran a tap down every threaded hole, none are stripped, included is the clutch fork pivoting bracket $200.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/31/17 12:20 AM

1970 and early 1971 E-body Hurst Pistol Grip shifter box excellent used condition $250.00 (708) 288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/31/17 12:32 AM

1970 to 1972 E-body and 1971 and 1972 B-body shift linkage for Pistol Grip shifters, excellent used condition $150.00 (708)288-2879
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/31/17 12:44 AM

1970 and 1971 Cuda Dana 60 drive shaft $1000.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 10/31/17 06:39 PM

1970 to 1974 E-body rear sway bar $125.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 11/01/17 01:45 AM

1970 and 1971 cast iron 440 SIX PACK intake manifold, excellent used condition $575.00 (708)288-2879 Scott
Posted by: FJ6AAR

Re: E Body - Parts For Sale - 4th Quarter - 11/01/17 11:52 PM

Hi, I have a new pair of reproduction 71 'Cuda headlight bucket extensions. They are new but are missing two of the four "L" shaped brackets. The two shorter ones are there but the two longer ones are missing. Easy to fabricate if you're handy. $175.00 shipped. Continental 48 only. I can not accept Paypal, so Postal Money order is best.
I also have new reproduction headlight buckets for a 71 Cuda. These are the buckets that get welded into the front of the fenders before these brackets get bolted on - so you can convert 1970, 72-74 fenders to 1971 fenders. They are still welded into reproduction 71 fenders that were destroyed - but the buckets are fine, you just need to cut them out of the fronts of the fenders. Have the louver pieces too to graft in as well as 70-71 side marker light pieces. Will sell all for $300.00

PM me here for questions. Will also trade for E Body stuff and/or two used, very nice, 426 Hemi connecting rods - stock pin and length.

Please click on link below for a photo

[img:center]https://ibb.co/f52MTG[/img]
Posted by: mopar_muscle

Re: E Body - Parts For Sale - 4th Quarter - 11/02/17 01:24 AM

Please read the rules before replying to an ad. This is not a discussion forum!!
Posted by: TONY_DAGOSTINO

E-BODY CONVERTIBLE PARTS - 11/02/17 04:45 PM

! ALL E-BODY CONVERTIBLE PARTS:

Cuda Recovered Black Leather Front and Rear Seats $1795,

Challenger White Door + Rear Interior Panels Recovered By Just Dashes $1295set,

Top Frame, Nice No Rot $2895,

Top Frame Header Panel Weather-strip Channel $295,

Top to Body 3-Piece Tack Strips $595set,

Wide Outer Windshield Moldings, Stainless $1695set,

Inside Windshield Upper and Corner Metal Trims $1495set,

Top Latch $195,

Brackets That Hold Sun Visors and Top Latch Hooks $395pr,

Sun Visors $275pr,

Boot Channel $195,

Door Glass $275,

302-398-0821

TONYSPARTS.COM

Harrington Delaware 19952
Posted by: TONY_DAGOSTINO

Re: E-BODY PARTS - 11/02/17 04:47 PM

! ALL E-BODY:

1970 Cuda Rubber Front Bumper, Original $1195,

New Reproduction 70 Cuda Headlamp and Rear Body Wiring Harnesses $195set,

New Reproduction Complete 70 Foglamp Wiring from Switch to Bulbs $110set,

New AMD Cuda Trunklid $245,

Cuda Convertible Recovered Black Leather Front and Rear Seats $1795,

Challenger Rear of Hood Molding $245,

1971 Challenger Grill $1295,

Restored 1970 Emergency Brake Pedal Assembly $345,

Am/8-Track Radio $745,

Restored Rimblow Steering Wheel and Cap $895,

73-74 Bucket Seats with New White Covers $495,

1970 Go-Wing, Original $450, New Reproduction $170,

Kickdown Linkage $135,

6-Pak Carburetors, Original $325+Up,

340 Exhaust Manifolds $295-$575,

NOS CA332 6-Pak, Hemi Oval Air Filter $195,

Loads Of Original Window Regulators, Tracks, Guides, Etc. $45+Up,

302-398-0821

TONYSPARTS.COM

Harrington Delaware 19952
Posted by: davesmopars

71 to 74 E Body NOS Clutch Switch - 11/02/17 09:54 PM

71 to 74 E Body NOS Clutch Switch
In the box
part # 3514432
casting # 3488177
****sold****
pm here

Posted by: davesmopars

Re: 70 to 74 E Body NOS Dimmer Switch - 11/02/17 09:58 PM

70 to 74 E Body NOS Dimmer Switch in the Box
part # 3420865
casting part # 2947713
250.00 shipped 48 states others a little more
pm me
Posted by: davesmopars

Re: 70 to 74 E Body NOS Heater A/C Switch - 11/02/17 10:04 PM

70 to 74 E Body NOS Heater A/C Switch
OEM 3502126 3502126B, 3895033 replaces 3431020
****sold****
Thanks
Posted by: 70sixpkRT

A/C Compressor - 11/04/17 04:19 PM

1970's Mopar A/C Compressor Part # 3502715. It comes with the brackets. Clutch spins freely.
Sold.
Posted by: 67valentine

Re: E Body - Parts For Sale - 4th Quarter - 11/04/17 04:24 PM

Original 70 Cuda Grill.

This is an original Cuda grill PN 2949558. Good condition with no major cracks - a few minor ones. Comes with headlight bezels, also original equipment PN 2949566 and 2949567. Complete trim set for the grill and bezels, all original and restored in perfect condition. Have one turn signal housing that will include - poor condition. Asking $995 for entire set. Will ship, buyer pays shipping.

Rob
rcola427@aol.com
760-685-5126
Posted by: bremotorsports

Re: E Body - Parts For Sale - 4th Quarter - 11/04/17 05:30 PM

Pair of Early Take-Off E-Body Resonators. Real deal!!!

Date Code 8 70.

200.00 plus shipping for the pair. SOLD!! SOLD!! SOLD!!

Bill Rolik

bremotorsports@verizon.net

201-394-5533 Cellular

PayPal preferred.

Posted by: bremotorsports

Re: E Body - Parts For Sale - 4th Quarter - 11/04/17 05:31 PM

Date code as indicated in photo.
Posted by: bremotorsports

Re: E Body - Parts For Sale - 4th Quarter - 11/05/17 03:44 PM

Near NOS (Probably a take-off) 2835880 Pitman Arm

70-72 E-body

Correct 2835878 Forging Number on the arm. Clean and tight. Bolt it on!

250.00 Plus shipping.

Bill Rolik

bremotorsports@verizon.net

201-394-5533 Cellular

PayPal preferred
Posted by: bremotorsports

Re: E Body - Parts For Sale - 4th Quarter - 11/05/17 03:45 PM

Forging number for your review.
Posted by: 70440+6bbl

Re: door guards - 11/06/17 11:46 AM

Used 1971 clutch safety switch.

$100.00 shipped in the CONUSA
Posted by: QuickBpBp

Re: E Body - Parts For Sale - 4th Quarter - 11/07/17 05:45 PM

Good used RH set of 70-early 71 pot metal seat hinge covers for A, B and E-body. Button is missing but they do come up from time to time. Both locater pins are there as most are broken, the inner one has some light corrosion along bottom edge graining would not be seen once installed. Glass beaded and ready to paint. $95Pr.

Parts located in SE PA
Pm here on the board or e-mail bretts440"at"frontiernet.net
Thanks for free ad Moparts!
Posted by: littleredcoffin

`73 340 AUTO CUDA PARTS FOR SALE - 11/08/17 02:31 PM

PARTS FOR SALE...SUPER CLEAN BLACK RALLY DASH PAD,3 SPEAKER NON A.C..CLEAN ORIGINAL PIECE..$500,REALLY NICE FRONT AND REAR BLACK "`CUDA" INTERIOR PANELS,,ALL 4 CLEAN,UN-CUT $250 SET OF 4,3.23 SURE GRIP 489 CASE $475,727 DRIVESHAFT $75,NON A/C HEATER BOX ASSENBLY $250,TOO MUCH TO LIST,CALLS ONLY 603 209 1678.IM RON JOHNSON AND AS ALWAYS I SELL FOR LESS,BECAUSE I PAY LESS AND PASS THE SAVINGS ON TO YOU THE CUSTOMER!!!
Posted by: rayztoy

VARIOUS PARTS - 11/09/17 10:01 AM

VARIOUS PARTS
2 OEM 3 Nipple breather $50.00 each
Repro Brake Booster Wiring Clip 1971-74 A & B-Body 1970-74 E-Body with nuts $25.00
ECS Engine Starting Instruction Card hangs on turnsignal 1970-1971 All Vehicles $5.00
DMT Manual Console Woodgrain overlay for 1970 E Bodies, 1970 ONLY Barracuda, Challenger (1971-74 models used the darker American Walnut color). This is made from 3M DiNoc. $25.00
Repro Owners Manual 1970 Barracuda $5.00
ECS Vacuum Advance Decal Green 4675 all $5.00
Gearbox Date Tag (10th day of 1970) $15.00
Transport Tie Down Bracket $20.00
Fuel Line Ground Strap $5.00
4 Speed Pedal Rod $20.00
Heater Hose Strap, 3 available $5.00 each
Fine Lines Metal Rear Axle Brake Line 1972-76 A-Body, 1971-74 B-Body, 1970-74 E-Body $15.00
Repro Shaker drain hose w clamps SOLD
Cuda Challenger Shaker Support Feet: New reproduction shaker base plate to valve covers support feet. Semi-gloss black painted metal with black rubber coating on section that contacts the valve covers, includes the 2 bolts. $60.00
ECS Sunvisor Sleeve 1970-1971 All Vehicles $20.00
New Fuel Pump AFP 4845 NAPA Big Block High Performance w/ 3/8 $25.00
Aftermarket Sway bar brackets, poly bushing and mtg hardware $15.00
1970 Cuda rear bumper, good for driver or core $25.00 local pickup only
Mopar Super Stock Battery, can be used for shell for a replaceable small modern battery hidden inside $25.00

Pics upon request, contact via PM or email zabinsky4@msn.com, Money Orders ONLY, buyer pays shipping
Thanks for the ad MOPARTS!
Posted by: challenger6pack

Re: E Body - Parts For Sale - 4th Quarter - 11/09/17 04:13 PM

1970-1974 Cuda Challenger A/C Under Dash Trim. Hard to find part in good condition. There are two scratches and one crack. Both are nearly impossible to see when it is mounted. All the screw holes are good and not cracked. It is not powdery or brittle. It has been in dry, cool storage for around 25 years. I'm asking $175 + actual shipping costs from south Florida. I can be reached by PM. Thanks.
Posted by: HemiChallenger

Re: E Body - Parts For Sale - 4th Quarter - 11/09/17 08:49 PM

70-1 Space Saver Spare 6 -70 Date never mounted still have paint drips and runs. NOS Condition From Dealer Shelf. Comes with inflator bottle, no bracket. This is as nice as you will find. $2000

70 Challenger Jack Setup (Mast, Hook (102), Base and Tire Iron) Original Paint Very Nice $375

70 Challenger Jack Setup w/o Hook NOS Condition From Dealer Shelf (Mast, Base, Tire Iron) $300

70-1 Cuda Jack Hook For Elastomeric Bumpers Original Nice Shape $150

70-1 NOS Challenger Front License Plate Bracket Kit $225

72 NOS Challenger Front License Plate Bracket Kit $175

73-4 NOS Challenger Front License Plate Bracket Kit $125

71 Challenger Flip Top Pressure Vacuum Locking Gas Cap, no keys $300

70-1 Six Way Seat, Very Clean Good Knobs, Fully functional from low mile car $600

70-1 Challenger Convertible Rear Interior Panels for Power Windows, Very nice originals, 1 split by sill plate can be fixed $650

71 Challenger NOS Tailight Cover Panel Black in Color $1100

71 Challenger NOS Tailights $400

70 440-6 Intake manifold Cast Iron $550

71 440-6 Idle Soleniod, DR1114443, low mile take off plating is impeccable $600

70 TA Steering box w/ pitman Arm SOLD

71 Cuda/Challenger NOS Inner Fender Pair $750

70 Challenger Grilles (From cores to Concourse Restored) $INQUIRE


Steve@sigelenterprises.com


Posted by: moparmarks

Re: E Body - Offset Spring Hangers - 11/10/17 04:02 AM

Here is a new set of offset spring hangers that I've had for years.
Fit E-body with Super Stock springs.
150.00
Plus shipping.
Take check, MO or PayPal.

Thanks Moparts

SOLD
Posted by: moparmarks

Re: E Body - Sun Visors - 11/10/17 04:06 AM

Nice set of original black sun visors. One has a couple impressions other wise they are in real good drivers condition.
100.00
Plus shipping.
Take check, MO or PayPal.

Thanks Moparts

SOLD
Posted by: moparmarks

Re: E Body -A pillar covers - 11/10/17 04:10 AM

Decent set of used original A pillar covers for 71-4 E body hardtop.
Both have a broken end that is covered by the metal trim. These are the 1970-early 71 ones. Good drivers condition.
60.00
Plus shipping.
Take check, MO or PayPal.

Thanks Moparts
Posted by: 71redcuda

NOS BY PLYMOUTH emblem - 11/10/17 05:07 PM

NOS Original BY PLYMOUTH emblem with the black background. NOS never mounted.

Perfect condition. Ready to mount on a OE restored Cuda.

https://www.garaget.org/mypage/?page=gallery&user=106330&album=72456

600$ including shipping.

Email: nicklas-780@hotmail.com
Posted by: QuickBpBp

Re: E Body - Parts For Sale - 4th Quarter - 11/10/17 06:12 PM

Nice used 1971 3 port valve cover breather. $46 shipped to the lower 48.

Parts Located in SE PA.
Pm here on the board or e-mail bretts440"at"frontiernet.net
Thanks for free ad Moparts!
Posted by: littleredcoffin

`CUDA LOCK ROD COVER - 11/11/17 11:54 AM

`CUDA LOCK ROD COVER,$20..CLEAN,CALLS ONLY 603 209 1678.NO TEXTING,NO EAMILS..PAY BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

$10 CUDA TRUNK LOCK ROD AND LOCK NO KEY - 11/11/17 12:09 PM

73-74 CUDA TRUNK LOCK ROD AND LOCK.NO KEY...$10CALLS ONLY 603 209 1678,NO EMAILS.PAY BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

70 BLACK A PILLAR PLASTICS NICE - 11/11/17 12:14 PM

BLACK CLEAN A PILLAR PLASTICS.ABOVE AVERAGE.$70PR,CALLS ONLY 603 209 1678.NO EMAILS.US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

CLIP COWL PLASTICS - 11/11/17 12:17 PM

CLIP IN COWL PLASTICS.NEEDS PAINT.NOT BROKEN.$15PR,CALLS ONLY 603 209 1678.NO EMAILS. PAY BY US POSTAL MONEY ORDERSS ONLY
Posted by: littleredcoffin

ELECTRONIC IGNITON BOX BRACKET - 11/11/17 12:19 PM

USUALLY FOUND ON 72-UP CARS $10,CALLS ONLY 603 209 1678..NO EMAILS.. PAY BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

ONLY $15 72-74 CUDA TAILLIGHT RINGS - 11/11/17 12:21 PM

ALL GREAT SHAPE....$15SET OF 4,CALLS ONLY 603 209 1678.NO EMAILS.PAY BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

NEW LOWER PRICE $35 DRIVERS SIDE DASH PLASTIC - 11/11/17 12:23 PM

DASH PLASTIC DRIVERS SIDE.$35,calls only 603 209 1678,no emails.Pay by us postal money order only
Posted by: littleredcoffin

PASSENGERS DASH PLASTIC - 11/11/17 12:26 PM

GOOD SHAPE HAS SMALL SCRATCH,NO BROKEN STUDS $30,CALLS ONLY 603 209 1678.NO EMAILS...PAY BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

EMISSION CONTROL - 11/11/17 12:27 PM

EMISSION CONTROL VENT.NOT TESTED $10,CALLS ONLY 603 209 1678 NO EMAILS
Posted by: littleredcoffin

$12 DASH SPEAKER GRILLE - 11/11/17 12:28 PM

BLACK GOOD SHAPE.$12.CALLS ONLY 603 209 1678,NO EMAILS.PAY BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

NEW LOWER PRICE $20..WINDSHIELD LOWER STAINLESS CORNERS - 11/11/17 12:30 PM

GOOD PAIR,MATCHED OFF SAME CAR...$20PR,CALLS ONLY 603 209 1678.NO EMAILS.PAY BY US POSTAL MONEY ORDERS ONLY.
Posted by: littleredcoffin

UPPER CONTROL ARM COVERS - 11/11/17 12:32 PM

OK SHAPE.NEEDS GLASSBEADING $8PR,CALLS ONLY 603 209 1678,NO EMAILS.PAY BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

NEW LOWER PRICE $20 LOWER DASH VENTS CABLES - 11/11/17 12:34 PM

WORK FINE,,,HARD ITEMS TO FIND $20PR,CALLS ONLY 603 209 1678,NO EMAILS.NPAY BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

NON RALLY DASH HEATER CONTROLLER - 11/11/17 12:36 PM

RALLY DASH HEATER CONTROLLER.$15,CALLS ONLY 603 209 1678,PAY BY US POSTAL MONEY ORDERS ONLY.NO EMAILS
Posted by: littleredcoffin

DRIVERS SIDE KICK PANEL - 11/11/17 12:38 PM

GOOD SHAPE...BLACK.$20,CALLS ONLY 603 209 1678.NO EMAILS...PAYMENT US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

RADIO BRACKET - 11/11/17 12:41 PM

RADIO BRACKET $10,CALLS ONLY 603 209 1678.NO EAMILS.US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

NEW LOWER PRICE $50 NON A/C HEATER HAS SOME ISSUES - 11/11/17 12:44 PM

FLAPPER DOOR IS RUSTY,EDGE OF VENT HAS SOME CHIPS IN PLASTIC..GOOD FOR PARTS $50..YOU WILL NOT FIND CHEAPER PRICE ANYWHERE!!!! VERY HARD TO FIND THESE.CALLS ONLY 603 209 1678.NO EMAILS..PAY BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

NEW LOWER PRICE $15 72-UP CUDA HEADLIGHT BEZEL - 11/11/17 12:47 PM

PASSENGERS SIDE CUDA HEADLIGHT BEZEL.GOOD SHAPE,$15,CALLS ONLY 603 209 1678,NO EMAILS.PAY BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

E BRAKE J HOOK - 11/11/17 12:49 PM

JUST HAVE THE J HOOK..$8 ,CALLS ONLY 603 209 1678,PAY BY US POSTAL MONEY ORDES ONLY
Posted by: moparphilll

Re: E Body Brackets - 11/12/17 08:50 PM

body floor shift and console brackets on an original floor cutout.
$95 plus shipping
moparphilll@aol.com
Posted by: moparply

Re: E Body - Parts For Sale - 4th Quarter - 11/13/17 10:22 AM

NOS 1970 Cuda GE headlights, GE 6012, early wide flute in their original box's, $300 pair includes correct insured shipping.

NOS Challenger Cuda wiper blades and wiper refill assemblies. These are assembly line correct Trico 16" assemblies in the very early Trico box's from the 1960's, mint condition, $400 pair.



Email Kenei@comcast.net
Posted by: jcc

Barracuda used Dr door panel - 11/13/17 10:57 AM

1972 Barracuda used Drivers side white door panel, as is, as pictured, shipped from SW Fla, $35 OBO + shipping/packing PM

Posted by: 6PACKB

Cuda fibergalss fenders SOLD - 11/13/17 12:46 PM

Cuda fibergalss fenders.
I don't think these have ever been on a car. Look to be in good shape, only issues that I can see is it looks like someone was going to put side markers in them then filled the holes back in.

I think these will fit all five years of E body barracudas.

SOLD or trade, need lots of 70/71 Cuda stuff
Posted by: littleredcoffin

3.23 SUREGRIP,489 CASE WITH LARGE YOKE - 11/13/17 04:45 PM

3.23 Suregrip,489 case with large yoke.Clean unit.Came out of `73 340 automatic `Cuda.$450 firm.my price wont be beaten!!!! Calls only 603 209 1678..No emails..PAYMENT BY US POSTAL MONEY ORDER ONLY.
Posted by: QuickBpBp

Re: E Body - Parts For Sale - 4th Quarter - 11/13/17 09:47 PM

Nos 70-71 Hemi & Six pack 2 port Valve Cover Breather Has a ding in top and scratches in black paint. Cheaper than a Chinese one. $65 plus shipping

Part is located in SE PA.
Can send more pictures if interested.
Pm here on the board or e-mail bretts440"at"frontiernet.net
Thanks for free ad MOPARTS!
Posted by: Sixpaksteve

Carburetor Linkage Stud - 340 Six Pack - 11/14/17 07:59 AM

I have a Carburetor Linkage Stud for sale that I believe is used on 1970 340 Six Pack applications with both manual and automatic transmissions. It might also be correct for some 4-barrel applications but please do your own research.

I believe this is an original part vs. a reproduction since I pulled it off of my 440 6-Pack Cuda which I've owned for more than 15 years. It's Zinc phosphate plated as the originals were and it includes the linkage stud nut used on all 1966-Early 1970 applications. Features of this nut include correct conical spin washer, recessed thread end, and zinc phosphate plated & oiled as original.

The throttle cable retaining pin, washer, and hair pin cotter likely are not original.

Price is $20.00 for everything shown plus shipping from the 21771 zip. Please PM me here for add'l info..

Thanks MOPARTS!
Posted by: TONY_DAGOSTINO

new #2944450 15x7 steel wheels, Licensed - 11/14/17 01:12 PM

New Product!

The 1970-1971 #2944450 15”x7” Steel Wheel Is Finally Available As An Affordable Licensed New Reproduction for $995 per set! (includes date stamping for your application!!)


They have all of the correct characteristics, stamps and markings visible once installed on the car!

These #2944450 15”x7” Steel Wheels Were the Standard Wheel on Every Hemi E-Body and Were the Standard Wheel on All Other 1970-1971 E-bodies And B-Bodies when 15” Tires Were Optioned. They Were Also the Spare Wheel Used On All B-Body 15” Wheel Cars.

These #2944450 15”x7” Steel Wheels Are The Rarest Of Wheels To Find Because Many Threw Away These Plain Steel Wheels In Lieu Of Mags Back In The Day.

So Due To Their Rarity And Applications Originals of the #2944450 15”x7” Steel Wheels Have Soared In Price To Over $4000 Per Set Of 4!!
We’re Offering Them for Less Than 25% Of That Price!!

Our New Wheels Are Licensed By Chrysler And We Are Able To Date Code Them For Your Application!

tonysparts.com
302-398-0821
Tony’s Parts
Harrington Delaware 19952
Posted by: GKMOPAR

1970 E Body parts Console - 11/15/17 07:32 PM

I have a 1970 only E Body console for sale. It is a parts console or could be repaired. There are a couple of repaired cracks (rear corner and in front of shifter) and a couple of unrepaired cracks (lower body and upper next to shifter). Console body mounting studs look good but the lid has several broken off). I think 71 and newer E and B Body lids will fit. Price $50 OBO plus shipping. Thanks
Gerry
Posted by: GKMOPAR

1970 Challenger dash pad - 11/15/17 07:39 PM

I have a black dash pad out of a 70 TA. It has one crack in front of speaker. Frame in great shape. $100 plus shipping. Could do local pickup in Hilliard Ohio (west Columbus).
Posted by: littleredcoffin

REAR SWAY BAR AND SWAY BAR PLATES $85 - 11/16/17 12:23 AM

REAER SWAY BAR AND SWAY BAR PLATES,,SWAY BAR STILL MOVES IN THE BUSHINGS..PLATES NOT RUSTED OUT..$85,CALLS ONLY 603 209 1678,PAYMENT BY US POSTAL MONEY ORDER ONLY
Posted by: gdmusclecar

nos 71-74 cuda trunk floor - 11/16/17 07:35 AM

nos 71-74 cuda trunk pan $999

orange park,fl

e-mail: gdmusclecarparts@yahoo.com

shop # 904-272-1803

cell # 904-589-4645
Posted by: davesmopars

Re: 1971 340 Thermoquad 4972S - 11/16/17 11:50 AM

Use the pm function or e-mail. You have been here long enough to know how the system works!!!
Posted by: polaraholic

Re: E Body - Door Handles - 11/16/17 04:12 PM

SOLD: This is a NOS set of door handles for all e-body cars. The fronts are very nice with a chrome edge and a brushed handle and key area. The back of one is rougher than the other. The gasket set goes with them. $125. shipped anyplace in the continental U.S.A. PM me here
Posted by: EV2 AAR

Re: E Body - 70-74 Cuda rear door panels - 11/18/17 04:29 PM

For sale is a very nice pair of black rear door panels from a 72 Cuda I parted out years ago . This was a friends sisters car ,1 owner , never anyone sat in the back seat ! Again , very,very nice originals !!!! Believe they are the same for 70-74.

$ 400 plus actual shipping
Posted by: EV2 AAR

Re: E Body - 70-71 Cuda rear taillight panel - 11/18/17 05:46 PM

For sale is a tail light panel from a 70 Cuda .Very clean/solid especially around/in the license plate area and tail light openings . . Only rust is under the trunk getter location , which will be hidden after repair .
Very nice original piece .

$250 plus actual shipping , or pickup in Ct .
Posted by: Mopucky

Cuda Parts - 11/18/17 05:53 PM

NOS Cuda hood.........................$1300
70-71 Parts Catalog...................$350
Front bumper brackets...............$175
Rear bumper brackets................$100
Rear interior door panels............$200/pair
4 speed setup minus trans.........$1500
(Pedal Assy., console, shifter and handle, flywheel, bellhousing, brackets and linkage.)

PM me here. I check often. Prices plus shipping. Thanks!
Check with me for more. Have a ton more.
Posted by: jdpools67

Re: E Body - Parts For Sale - 4th Quarter - 11/18/17 07:21 PM

ALL For sale ads need:

Price
Location
Contact Info
Posted by: littleredcoffin

73 cuda parts headliner bow set up - 11/20/17 01:19 PM

Headliner bow set,with lower retainers for rear part od headliner... $35set up,will not seperate...Calls only 603 209 1678,payment is by US POSTAL MONEY ORDERS ONLY!!!! NOTHING ELSE.
Posted by: littleredcoffin

TRUNKLID ARMS - 11/20/17 01:21 PM

THESE ATTACH TO THE TRUNKLID AND PIN TO THE TRUNK SUPPORT...ALWAYS LOST WHEN SOMEONE ELSE TORE IT APART..$20PR,CALLS ONLY 603 209 1678.PAYMENT BY US POSTAL MONEY ORDER ONLY,,,
Posted by: littleredcoffin

340 ACCELERATOR CABLE WORKS FINE - 11/20/17 01:24 PM

THIS IS FOR A 340,NOT 318.EVEN HAS THE WAVE METAL TO SECURE IT SO AS NOT TO LOOSEN UP.$15,CALLS ONLY 603 209 1678,PAYMENT BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

CONSOLE BRACKETS - 11/20/17 01:27 PM

CONSOLE BRACKETS...CONVERTING TO FLOOR SHIFT...AUTO OR 4 SPEED..YOU WILL NEED THESE.CALLS ONLY 603 209 1678.PAYMENY BY US POSTAL MONEY ORDERS ONLY!!
Posted by: littleredcoffin

drivers under dash air vent - 11/20/17 01:31 PM

SOME RUST ON TOP OF FLAP.NO HOLES THAT I SEE.DOOR MOVES FREE.$15,CALLS ONLY 603 209 1678.PAYMENT BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

K FRAME TO LOWER CORE SUPPORT BRACE /BRACKET - 11/20/17 01:33 PM

THESE ARE ALWAYS BENT BROKEN OR MISSING!!!!!!!!!!!THE ONLY ONE I HAVE IN STOCK OR HAVE SEEN IN MONTHS OUT HERE. $20,CALLS ONLY 603 209 1678.PAYMENT BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

CUDA TRUNK SPARE TIRE FLOOR BRACE - 11/20/17 01:34 PM

CUDA TRUNK SPARE TIRE FLOOR BRACE WITH TIRE HOLD DOWN ROD $20,CALLS ONLY 603 2009 1678.PAYMENY BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

70-71 CHALLENGER HEADLINER BOW SET. - 11/20/17 01:36 PM

CORRET FOR 70-71 CHALLENGER...$25 SET,CALLS ONLY 603 209 1678.PAYMENT BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

SPEEDO CABLE WORKS FINE - 11/20/17 01:37 PM

SPEEDO CABLE.WORKS FINE,PLASTIC CLIP NOT MISSING...$10,CALLS ONLY 603 209 1678,PAYMENT BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

REAR FRAME RAIL TIE DOWN BRACKETS - 11/20/17 01:39 PM

BRACKETS ARE FOR SECURING CAR DOWN,IN DELIVERY...USUALLY MISSING WHEN THE CAR GETS TAKEN APART.$20PR,CALLS ONLY 603 209 1678.PAYMENT BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

72-74 CUDA GRILLE PIECES - 11/20/17 01:41 PM

72-74 CUDA GRILLE REPAIR PIECES.$30 PER SIDE OR $50PR,CALLS ONLY 603 209 1678,PAYMENT BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

72-74 CUDA GRILLE RECTANGULAR CHROME INSERTS $50pr - 11/20/17 01:44 PM

72-74 CUDA GRILLE CHROME INSERTS.MATCHED PAIR.NO BROKEN STUDS.HAS MOST OF THE CLIPS ON THE RETAINING STUDS.CHROME IS NOT PITTED UP.$50PR.CALLS ONLY 603 209 1678,PAYMENT BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

72-74 BLACK SUNVISORS - 11/20/17 01:46 PM

STITCHING IS GOOD,OVER ALL THESE ARE IN DESCENT SHAPE.NOT SHOW! $30PR,CALLS ONLY 603 209 1678.PAYMENT IS BY US POSTAL MONEY ORDERS ONLY.
Posted by: littleredcoffin

GAS PEDAL ASSEMBLY - 11/20/17 01:48 PM

WORKS FINE $10,CALLS ONLY 603 209 1678.PYMENT BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

CUDA BACK GLASS INTERIOR MOLDING SET. - 11/20/17 01:50 PM

THE SET NEEDS TO BE GLASSBED A LITTLE ON BACK SIDE.NO RUST HOLES.GRAINING IS THERE.$20SET.CUDA ONLY.CALLS ONLY 603 209 1678.PAYMENT BY US POSTAL MONEY ORDERS ONLY
Posted by: littleredcoffin

CUDA REAR HEADLINER RETAINERS - 11/20/17 01:52 PM

CUDA REAR HEADLINER RETAINERS..$20PR,CALLS ONLY 603 209 1678.PAYMENT BY US POSTAL MONEY ORDERS ONLY
Posted by: Claudia

Mopar Wheels - 11/20/17 02:21 PM

Rear: P235 / 60R14
Front: P195 / 75R14

All four hold air and come with trim rims and lug nuts.

$350.00 OBO
Posted by: 69B71E10LC

Challenger SE fender moldings - 11/20/17 09:58 PM

I have a pair of fender moldings, the left is NOS and has some scratches in the chrome. The right side is used but not bent or damaged. asking $150 for the pair plus shipping. Thanks Andy

SOLD Thanks Moparts
Posted by: Adam71Charger

1971 Bucket Seats - 11/21/17 04:04 AM

Im installing racing seats in my 71 charger. I've decided to sell my original factory bucket seats. I know the seats are the same for E bodies, but Im no expert on interchange of seat tracks between 71-74 B and 70-74 E. I think I read they will bolt up, but the B tracks may be slightly taller? Either way, my seats are for sale. I was told by a member that although the frames are the exact same frames used in ebodies, the seat cushions are unique to b bodies. I am willing to remove the tracks and sell the seats only. I do not want to take the vinyl and cushions apart though.

I've never sold or bought original seats before, so Im not sure what they are worth. I saw some junky torn up seats on ebay for 695 plus 200 shipping, and mine are in way better condition, so I made an ebay ad for 700 plus 367 shipping. Thats just ebay though, I will gladly make different arrangements for fellow moparts members. Please message me or call/text me at 253-691-4880, and we can talk about price and shipping.

The seats are untouched originals, complete with their original slider tracks. They are stored inside my house.

The track levers, mechanisms, springs and tracks are complete and in good working order. No bends or cracks. Sliding tracks move freely with no binding.

The fold down buttons and mechanisms work perfectly.

The frames and foams are in great shape. The vinyl is in pretty good shape, with only a few small tears on the sides (pretty much only on the drivers seat). There is some separation of the vinyl on the very bottoms of the seats, nothing drastic, just typical wear for seats of this age. The tracks have some surface rust and peeling paint.

As you can see in the pictures, they really are in good shape. You could bolt them in and go, or re-cover with new vinyl. Or, they are great candidates for a full restoration as they are complete.

If you'd like to see more pictures, just click on the link to my flickr account


IMG_2387 by Richard Bailey, on Flickr

IMG_2392 by Richard Bailey, on Flickr

IMG_2404 by Richard Bailey, on Flickr

IMG_2409 by Richard Bailey, on Flickr

4 pics per ad please!!!

Posted by: 70plymA34

Cuda 440 Hood emblem (Repro) - 11/21/17 09:37 AM

Repro Cuda 440 Hood Emblem. Good condition, need a little black touch up paint. This is the 2 pin version which was meant for a rallye hood.

$15+S&H

Shipped from 11218

Mike
shaker426@aol.com
call or text 516-250-2366
Posted by: 70plymA34

Cuda Side Marker Lite Bezel - 11/21/17 09:40 AM

1970 Cuda Side Marker Lite Bezel. Not sure if this is for front or rear or they might be the same. Its been a while since Ive taken one off a Cuda.

$7 +S&H.

Mike
shaker426@aol.com
call or text 516-250-2366
Posted by: Black 69 Beeper

Re: E-Body Books - 11/21/17 11:17 AM

RESTORATION STAMPS REPRODUCED IN HIGH QUALITY VINYL. paint OK, Inner fender, "MADE IN CANADA", "PD" DECKLID E-BODY, 1 4 8. All made to the closest color match possible and made of high quality vinyl. All are the correct size and scanned from correct stamps. $5.00 each shipped U.S.P.S. in the U.S.A. e-mail me on my home e-mail. copper1974@hotmail.com
Posted by: polaraholic

Re: E Body - Sway Bar - 11/21/17 01:59 PM

SOLD: This is an e-body sway bar. Looks like it is 7/8" diameter. Only minor pitting in the center and where the bushings would be. The center pitting has more on one side but I don't know if it is top or bottom. It has been cleaned and painted matte black. $45. shipped in the continental U.S.A.
Steve
Posted by: yorker

Re: Mopar Reproduction oil filter White, blue red stripe - 11/23/17 07:40 PM

Not sure where to post this, so E. body gets viewed most.


I have a Mopar filter made 5-25-2000. Not sure when they quit making these, but they did. I did not see any on e.bay current or sold. Someone does have a similar filter that has a vinyl decal for markings and he gets 39.00 for them.
Mine is from Mopar and say;s made in USA. Filter sealed in shrink wrap. Comes with original box. One upper corner of box had been slightly crushed because was at end of case. Includes some paper leaflet for subscribe to some Mopar mag ? and a Mopar Performance vinyl sticker. The sticker has a small rub mark on it.

This filter and box has just been removed from the case and has never even had dust on it.
I also have another filter just like it, that was not stored properly , box got wet and bottom of filter around rubber seal has some rust. May be usable, or for display. old box may be gone.
Asking 45.00 + 8.00 shipping for the nice one, 15.00 + 8.00 shipping for the other filter.

Posted by: mopar_muscle

rebuilt 360 heads - 11/24/17 09:20 AM

These 360 heads came off a car with only 5500 miles since the rebuild. Everything is fresh and new...springs, valves, hardened seats, etc. Decided to go with aluminum heads, so my loss - your gain. $300 mopar_muscle76@yahoo.com or 707 888 7374
Posted by: 70gtx440dana

1970-71 440 & Hemi leaf spring set 024 & 034 - 11/28/17 06:26 PM

Selling for a friend. Very nice set of 70-71 440 & Hemi 024 & 034 leaf springs with perches, shackles and shock mounts. All removed from a 70 440-4 Challenger that is being resto-modded. Very nice original parts. $400/OBO + shipping from 48837 for the set. Joe 517-243-7115 or jsawyer@wowway.com

SALE PENDING!!! Thanks Moparts!!
Posted by: dirtybird4408pk

70 to 74 Cuda exhaust tips 100 - 11/29/17 07:31 AM

I have new 2 1/2" exhaust tips for a barracuda. The price is $100 plus shipping. Contact me at dirtybird4408pack@yahoo.com located in NE Philly.




Posted by: 5carguy

Re: E Body - Parts For Sale - 4th Quarter - 11/29/17 04:12 PM

For sale is both left and right quarter panel skins for 70-71 Cuda.These were purchased at Year One.These are new.$200.00 for the pair and pick up only please.These are located in S.W. Florida.

PM here or Rtroyer1@comcast.net

Thanks for the ad Moparts
Posted by: mopar_leaner

N95 - 11/29/17 06:11 PM

I have two NOX solenoids with brackets and I know the little one is off a 1974 van with a 360 pn-3738591 (20984) and the other one I believe is off a 1971 340 car pn SOLD!!

Small power steering pump brackets.....$25 shipped lower 48

Braces that connect to he engine to the 727 some 340-360.....
Posted by: dodgerebellion66

Re: E Body - Parts For Sale - 4th Quarter - 11/29/17 08:25 PM

Cuda hood original purple paint with original cuda 340 emblems. Sitting since the '80's. Some surface rusting along the left side edge. Couple minor dents on the topside. $550.00.Trade or partial for challenger R/T hood. Call, text or email for pictures. (815)790-1974 Rich. email rctcnl@netzero.net
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 11/30/17 01:31 AM

1970 426 HEMI 4-speed prestolite dual point distributor, part #2875988 IBS 4017 BS date code 47-2, This was an NOS distributor that was sold over the counter, I have tested the vacuum advance, it pulls, excellent used condition $950.00 (708)288-2879 Scott
Posted by: challenger6pack

Re: E Body - Parts For Sale - 4th Quarter - 11/30/17 01:15 PM

1970 Cuda Challenger console. It has a small crack by the shifter. The lid was originally burnt orange. It has separated the way these do. There are a few holes drilled in the top where it goes up under the dash. It is hard to see them when it is mounted. The plate is in average condition for its age. I'm asking $150 + actual shipping costs from south Florida. Add 3% for Paypal. I can be reached by PM. Thanks.
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 12/01/17 02:58 PM

“SE” Roof Emblem $125,

1971 Challenger Grille $1295,

Shaker Hood Trimring, Original Cuda $795

AAR Spoiler, Original $495,

Original 4-Speed Topplate $225,

A/C Dual Center Vent Register $245, Single $125,

1970 Smallblock A/C Hoses #3441192 + #3441193 $175ea,

1970 440 6-Pak Carburetor Set $1150-$1195,

DR1114429 6-Pack and Hemi Idle Solenoid $485,

66-71 426 Hemi Carburetors $995+Up,

Nos #2875987 70-71 Hemi Distributor $995,

Hemi Valve Covers, Original $395-$795,

Dash and Rear Speaker Wiring $55+Up,

Dana and 8-3/4 Shock Plates $95pr,

440 Performer Intake $145,

Lower Control Arm for Use with Swaybar $165,

70-74 Bigblock Aluminum Bellhousing $425,

Throw-out Fork $45-$55,

302-398-0821

TONYSPARTS.COM

Harrington Delaware 19952
Posted by: GoodysGotaCuda

Re: E Body - Parts For Sale - 4th Quarter - 12/01/17 08:18 PM

72 Barracuda standard gauge set. Great condition, only pulled to install aftermarket cluster. $50 shipped to lower 48. SOLD

Located in North-Dallas, Texas
Posted by: convertcuda

Re: E Body - Parts For Sale - 4th Quarter - 12/03/17 08:37 AM

Mint OE 70 Cuda ralley hood - not rust or pits or damage 1000 OBO
Nos 70 Cuda Hemi H - pipe 1500.00
Nice clean set of 340 T/A Manifolds - 550.00 cleaned already
Cuda Convertible Quarters for sale 2300.000
Challenger Convertible Quarters for sale 2400.00
Cuda and Challenger Convertible Deck Panels 1200.00
Cuda and Challenger various support braces 250 to 500
All pieces made to OE specs or I have mint original.
If you are looking convertible sheet metal I pieces I have them ranging from 5.00 to 2500.00
Currently have Cuda and Challenger Conversions kits in stock 2500 to 25,000. If its fits and ebody convertible I have it.

Ken 715-432-5080 text works best or email convertcuda@gmail.com
Posted by: cdp

4spd clutch Safety switch. 71-up. - 12/03/17 10:45 AM

3488177 Safety switch assembly for 71 up E-bodies. Will fit 70 also, but different colored wire, I think. 100% complete with all the little parts too.

$185/shipped in 48 states.

Thanks
Chris
816 726 4512

Chrispy1971gtx@yahoo.com
Posted by: Joesixpack

Re: 4spd clutch Safety switch. 71-up. - 12/03/17 11:21 AM

Nos 3671076 plastic pcv valve with Pentastar&# on it, correct for 1972-1973 318-340 Ebody, 1974 318&360 Ebody$SOLD
cowgerwilliam035@gmail.com
Posted by: bugsydog

Re: E Body - Parts For Sale - 4th Quarter - 12/03/17 06:23 PM

I have a nice complete pair of 71 cuda tailghts. asking $200 can send pics upon request. thanks
Posted by: moparphilll

Re: E Body - Parts For Sale - 4th Quarter - 12/04/17 09:12 AM

1970-1971 Alternator good visible date codes, 3438172 dated 10-70
SALE PENDING
moparphilll@aol.com Fargo ND
Posted by: moparphilll

Re: E Body - Parts For Sale - 4th Quarter - 12/04/17 09:14 AM

more codes alternator SALE PENDING moparphilll@aol.com
Posted by: moparply

Re: E Body - Parts For Sale - 4th Quarter - 12/04/17 10:09 AM

Original 1970-74 Cuda and 1971-74 Challenger standard dash gauge assembly, $50

NOS 1972-74 PVC, factory Chrysler, $15


Email Kenei@comcast.net
Posted by: challenger6pack

Re: E Body - Parts For Sale - 4th Quarter - 12/04/17 11:24 AM

1972 1973 1974 Challenger fenders. I have 2 unneeded fenders. One needs some bodywork. I'm asking $100 for it. The other has a dime size rust spot and some surface rust. I'm asking $200 for it. It is nice fender. Both are drivers side fenders. They are located in south Florida. They are also a local pick up only. I can be reached by PM.Thanks.
Posted by: julius

Re: Cuda Barracuda Interior Trim - 12/04/17 10:33 PM

is the interior cuda trim still avaiable
Posted by: C_B5

"172" Alternator - 12/06/17 10:44 AM

Alternator Part# 3438172 with nice readable "70" date codes

The part number stamping 3438172 is visible though the middle digits are a little light.

Good core for rebuild

$140 includes shipping in the USA (AK, HI, Canada or other locations will pay additional shipping)

Send PM or email c-b5@zoominternet.net
Posted by: moparphilll

Re: "178" Alternator - 12/06/17 01:15 PM

3438178 Alternator Case 69 date pie 7-70 build $125 plus shipping
moparphilll@aol.com
Posted by: gdmusclecar

70 AAR CUDA,T/A CHALLENGER PITMAN ARM - 12/07/17 02:01 PM

70 AAR CUDA,T/A CHALLENGER PITMAN ARM $499

*WE CAN SHIP*

ORANGE PARK,FL.

E-MAIL: GDMUSCLECARPARTS@YAHOO.COM

SHOP # 904-272-1803
Posted by: gdmusclecar

70 T/A CHALLENGER REAR SPOILER "ORIGINAL" - 12/07/17 02:14 PM

70 T/A CHALLENGER REAR SPOILER "ORIGINAL" $375

*WE WILL SHIP*

ORANGE PARK,FL.

E-MAIL: GDMUSCLECARPARTS@YAHOO.COM

SHOP # 904-272-1803
Posted by: gdmusclecar

NEW 70 DODGE CHALLENGER R/T FENDER EMBLEMS - 12/07/17 02:22 PM

NEW 70 DODGE CHALLENGER R/T FENDER EMBLEMS $39 EACH

*WE CAN SHIP*

ORANGE PARK,FL.

E-MAIL: GDMUSCLECARPARTS@YAHOO.COM

SHOP # 904-272-1803
Posted by: Mr T2U

NOS lower steering shaft coupler # 1-03579522 - 12/10/17 12:27 PM

i have a ALMOST NEW lower steering shaft to steering gear coupler, was in a original box but looks like it was installed for testing and returned.
the outside of the coupler looks like a NOS part until you look closely at it. you can see some small witness marks from installation. this fits almost every mopar from the 60-80's.
the main coupler, the slides on the inside of the box, the pin that goes into the steering shaft, the gasket and the top cap are all present. it looks like the hollow pin to hold it to the steering box is missing.

the part # on the box is 1-03579522
a quick E-Bay search reveals insane asking prices for this part. several large Mopar dealers are also selling for insane prices.

i am selling for a reasonable price of $100 SHIPPED in the lower 48 states.
pm me here or email me mrt2you@msn.com
Posted by: THESHAKERPROJECT

Power window switches and wire ends - 12/10/17 02:34 PM

I have a set of Power window switches from a 69- 74 car all work great chrome with the stamped steel mounting brkts and wire ends all mint condition . $300 for the set Text Mike at 703-740-6824
Posted by: JRepucci

Re: E Body - Parts For Sale - 4th Quarter - 12/10/17 02:46 PM

Master cylinder mounting studs... typically fits all manual drum brake cars $25 for a set of 4
Posted by: blewbyu

71- up steering column for manual steering - 12/10/17 08:57 PM

I have a steering column for all E body 71 and up. It is for floor shift and manual steering $195 plus shipping

Blewbyu2bad@aol.com
Posted by: vinnyd76

1970 Challenger Doors - 12/11/17 08:43 AM

Update as of 12/26:

1. Cuda doors have been sold.
2. Lowering price on Challenger doors to $750 obo for the pair


A friend is looking to sell 2 pairs of E-Body. Both sets are from out west. One pair of doors are for a 70 Challenger and the other pair is for for a Cuda. They have been stored up in his attic for many years and he is ready to part ways with them. I have more photos... attached are a few.

Doors are located in Metro Detroit
Posted by: QuickBpBp

NOS Pair 1970 only E-body Chrome Rally Mirrors - 12/11/17 10:06 PM

Nos 70 Only E-body mirrors. Both in original boxes RH remote is Part #2999549 and Passenger side is Part #3508989. Neither has the screws or gaskets. Passenger side is excellent condition with original dated glass 12-DMI-5 so December of 1975. Driver's side is very nice but on the inside that would face the door glass you can see a few tiny tiny bubbles starting in the chrome towards lower "body line" of mirror cup. You can't see it unless you hold it and roll back and forth in the light. I didn't notice until I was taking pics but couldn't get camera to show. It would be on the inside towards door glass when installed but there none the less. Box dated 7/69 and no date code on mirror glass. (which I found is correct for assembly line cars during that time) If your doing a real restoration then these are for you. $750pr OBO shipped.

SOLD FAST THANKS MOPARTS

Parts are located in SE PA.
Can send more pictures if interested.
Pm here on the board or e-mail bretts440"at"frontiernet.net
Thanks for free ad MOPARTS!
Posted by: QuickBpBp

NOS 70-4 E-body Console lock with keys - 12/11/17 10:12 PM

Nos 1970-4 center console lock. Part # 3454987 Mint condition with both keys and code. If your doing a real restoration then this is for you. $75 plus shipping.


SOLD THANKS MOPARTS!

Parts are located in SE PA.
Can send more pictures if interested.
Pm here on the board or e-mail bretts440"at"frontiernet.net
Thanks for free ad MOPARTS!
Posted by: QuickBpBp

NOS 3 prong Nuetral Safety Switch - 12/11/17 10:48 PM

Nos 1970-74 3 prong neutral safety switch. Part # 2932820 Good condition. Vintage part in original box date on box is 0669. If your doing a real restoration then this is for you. $60 plus shipping.


SOLD THANKS MOPARTS!

Parts are located in SE PA.
Can send more pictures if interested.
Pm here on the board or e-mail bretts440"at"frontiernet.net
Thanks for free ad MOPARTS!
Posted by: rtsinc

Re: E Body - Parts For Sale - 4th Quarter - 12/12/17 08:09 AM

SELLING OUT FAST NEW TECHNOLOGY BARRACUDA OR CHALLENGER REFACE-IT GLOW GUAGE FACES. $55.00 WHITE OR BLACK. PLUS SHIPPING. BOTH CAN BE SWITCHED TO EITHER COLOR BLUE OR GREEN. DIY OR SEND CLUSTER TO ME AND I WILL INSTALL. THESE CARS HAS VERY POOR NIGHT ILLUMINATION. GET THE BLACK FACE FOR THE STOCK LOOK OR GET THE WHITE FOR MODERN LOOK. FULLY DIMMABLE. BEST QUALITY!!! CALL FOR QUESTIONS RTS RESTORATIONS 815 520 3227 ARIZONA TIME. 8AM-9PM
Posted by: gdmusclecar

8-3/4 SUREGRIP UNIT - 12/12/17 10:35 AM

8-3/4 SUREGRIP UNIT,GOOD USED,WE CHECKED IT. $249.99

*WE CAN SHIP*

ORANGE PARK,FL.

SHOP # 904-272-1803
Posted by: gdmusclecar

15 X 7 RALLY WHEELS W/CONE CENTER CAPS - 12/12/17 10:52 AM

15 X 7 RALLY WHEELS W/CONE CENTER CAPS (REPRO)

$350.00 PR

*WE CAN SHIP*

ORANGE PARK,FL.

SHOP # 904-272-1803
Posted by: gdmusclecar

426 HEMI AIR CLEANER - 12/12/17 11:01 AM

NEW 426 HEMI 2 X 4 BBL. AIR CLEANER BASE (FIBERGLASS)

$250.00

*WE CAN SHIP*

ORANGE PARK,FL.

SHOP # 904-272-1803
Posted by: Pale_Roader

Re: 426 HEMI AIR CLEANER - 12/13/17 05:27 AM


70-71 Challenger fiberglass fenders (pair). These are NICE quality, and in good shape. $250

Challenger aluminum driveshaft, for 4-speed/8 3/4" car. Brand new w brand new U-joints and yoke. $350

Rallye hood, no inserts, lil rusty (just the rear crossmember pretty much), lil denty. $200

70 rear bumper and brackets (light too). $150


Parts are an hour East ov Vancouver BC. Prices are in CDN (so you US types can really take advantage if you're near). I'd REALLY rather not ship the big stuff.


PM me here.
Posted by: 72ls5fla

14x5.5 Restored Rallye Wheels, Trim Rings and GoodYear Tires - 12/13/17 04:53 PM

hello -


I have a set of PT# correct 14"x5.5 rallye wheels.
The rims were restored with correct silver paint (from Rodger Gibson), and black backing
The set has VG condition, factory/OEM original trim rings
The tires are PolyGlass RWL F70-14 GoodYear reproduction tires (from Rusty)

$1,200.00 for all four tires/rims etc...
Plus buyer pays shipping costs.

Questions, please call: 850-567-2994 (cell)
or email at: bill.chamberlain@onetechplace.com

Thanks -
Bill
Posted by: 69B71E10LC

NOS cuda outside door handles - 12/13/17 08:24 PM

I have a pair of Cuda door handles, they are 4-5 years old and did not come in boxes. They look to be a later run. They are new asking $110 for the set plus shipping. Call Andy at 586-530-8529

Thanks for the ad
Posted by: 69B71E10LC

NOS 190 deg thermostat - 12/13/17 08:29 PM

I have a new in box 190 degree thermostat #3514176 is the box #. The # on the thermostat is 2843209, Asking $12 plus shipping. Call Andy 586-530-8529

Thanks for the ad
Posted by: 69B71E10LC

Mopar Viscous fan kit - 12/13/17 08:33 PM

I have a New P4120758 Viscous fan kit. Asking $125 plus shipping. Call Andy 586-530-8529.

Thanks for the ad

SOLD
Posted by: moparmarks

Re: E Body - Front Sway bar LCA's - 12/14/17 08:41 AM

From an early 70 E-body, front sway bar setup. Complete with all the original hardware. From a NM car. Very little if any pitting.
Fits 70-4 E and 70-2 B bodies.
300.00
Plus shipping.
Take check, MO or PP.
Free delivery to the MATS or S/Fling with prepaid.
Posted by: moparmarks

Re: E Body -Bucket Seat backs - 12/14/17 08:56 AM

Black one. Fits 71-4 B, 71-2 A/E Pass side
Real good driver condition with some minor scuffs except for inside hing cover which had some deep scratches.
80.00
Green one. Fit 70-early 71 A,B and E. Either side.
Good driver condition with some deeper scratches, mainly down low.
50.00
Plus shipping.
Take check, MO or PP.
Free delivery to the MATS or S/Fling with prepaid.
Posted by: moparmarks

Re: E Body - Bucket Seat Hing Covers - 12/14/17 09:23 AM

Fits bucket seats for 1970-early 71 A,B and E.
All are from Western cars and in real good divers condition needing paint. No rust or pitting. 2 of them are missing the small alignment pins otherwise on damage. 3 of the buttons have come out but has no effect once installed.
100.00/ pair, one seat.
180.00/ set, both seats.
45.00 ea for the 2 on the right without button.
Plus shipping.
Take check, MO or PP.
Free delivery to the MATS or S/Fling with prepaid.

All SOLD
Posted by: moparply

Re: E Body - Parts For Sale - 4th Quarter - 12/14/17 01:29 PM

Original Challenger Cuda Chrysler starter, assembly date 47th week of 1969, very nice stampings, $275

NOS 1970 Cuda Road Lamp bracket, passenger side, excellent condition, $80

NOS Challenger Cuda space saver rim, dated 7-1-69, never mounted on car, original paint, excellent condition, $500


Email Kenei@comcast.net
Posted by: QuickBpBp

71-4 E Body Original painted passenger side mirror - 12/14/17 06:02 PM

71-4 E-body original passenger painted racing mirror. Mirror glass is clean original glass. It's nice and tight stays where put. Hard to find original painted mirror not a pitted chrome one painted. $110 plus shipping

Parts are located in SE PA.
Can send more pictures if interested.
Pm here on the board or e-mail bretts440"at"frontiernet.net
Thanks for free ad MOPARTS!
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 12/14/17 10:11 PM

7.75X14 inch space saver spare for early built 1970 Cuda's and Challenger's excellent original condition, never been inflated, never ran $1500.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 12/14/17 10:32 PM

1970 E-body clutch safety switch for cars with manual transmission, part #2947858, as you can see in the pictures the wiring harness is missing, the spring inside is not broken, I am selling as a core to restore $150.00 (708)288-2879 Scott
Posted by: mtngoat64

Re: E Body - Parts For Sale - 4th Quarter - 12/15/17 08:32 AM

71 Challenger rear seat for sale. The black vinyl is in good drivers condition. The frame is in very good condition to re-upolster as new. Asking $100 OBO. Contact mtngoat64@yahoo.com for more information.
Posted by: C_B5

Re: E Body Door Lock Knobs - 12/17/17 01:49 PM

E-body Door Lock Knobs

Original factory parts with original chrome in good condition

All 3 lock knobs $30 includes shipping.

Send PM or email c-b5@zoominternet.net
Posted by: cudacar340

Re: E Body - Parts For Sale - 4th Quarter - 12/19/17 09:51 AM

NOS alternator bracket adjusting strap. Had tag from dealer but lost now. 2 new parts with long slot. 35.00 ea plus shipping.
Dave 734-692-7151
Posted by: kdsmith07

Re: E Body - Parts For Sale - 4th Quarter - 12/21/17 12:31 AM

70 cuda vinyl top trim in real nice shape.i put a quick buff on them and they look great with no dents or dings or tweaks.150.00 plus the ride from ga.30052.pm me or call or text 678-542-9138 if interested.pp plus 3% preferred.thanks,kent
Posted by: 79machocharger

1970 Challenger factory sunroof - 12/21/17 04:50 PM

Selling a factory sunroof for a 1970 Challenger
Pretty decent shape, missing the plug or actual sunroof panel. I do have a couple kicking around but not sure if they fit a challenger. I will include it if one does fit it.
$800 or trade for 23 spline b body 4 speed trans.
Posted by: 44070dart

Re: E Body - Parts For Sale - 4th Quarter - 12/23/17 10:56 AM

Have show quality MOPAR wood steering wheel (not rim blow) ..4004 F-TT .. #73992 ..excellent.. $450 plus ride..have just wheel, Buffalo NY area. if interested I'll email some pictures,can't post here ...... also looking for B-body console.......posted on for e bodies only also with pictures

https://www.forebodiesonly.com/forum/thr...mas-gift.15278/
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 12/23/17 06:35 PM

1970 440 HP block and main caps .030, casting date 1-26-70, there is a small chip in the block on the pan rail by a bolt hole area, it will still hold a bolt $850.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 12/23/17 07:11 PM

1969, 1970 and 1971 small block 10 1/2 inch bellhousing, nice used condition, not cracked, cast #2892482 $200.00 (708)288-2879 Scott
Posted by: GoodysGotaCuda

Re: E Body - Parts For Sale - 4th Quarter - 12/23/17 07:33 PM

1970-1974 Plymouth 'Cuda rallye hood.

Four "studs" on the a-surface are shown, rest is in great shape. The B-side of the hood has some rust pitting. Comes with two scoops. Available for pickup in North Dallas-Fort Worth, TX. $225


PM or goodysgotacuda@yahoo.com
Posted by: beepedout70

Re: E Body - Parts For Sale - 4th Quarter - 12/27/17 11:03 AM

1971 B and E body 340 26" Radiator, part number 3443969. Radiator was recored in the 90's and was removed from the car shortly after when I went big block. Was stored in a dry garage ever since and I just had it cleaned/boiled and pressured checked at a radiator shop, it is good to go with no issues. $395

Email:
FK5runner@yahoo.com
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 12/27/17 03:43 PM

1972, 1973 and 1974 "B" and "E" body 2 speed wiper motor NOS in the box, part #3431533, never been installed on a car $250.00 (708)288-2879 Scott
Posted by: ChrgrCuda

Re: E Body - Parts For Sale - 4th Quarter E Body Hood Hinges - 12/27/17 04:49 PM

70-74 E-Body hood hinges for fiberglass hood. Removed them from a 74 Cuda T/A clone with a fiberglass AAR hood. I'll take the best offer
Posted by: moparlouie

Re: E Body - Parts For Sale - 4th Quarter - 12/28/17 10:35 AM

NOS 2BBl Carter carb/choke kit, for 70/71 383 A/T Dodge truck/Plymouth/Chrysler/Challenger. NIB. Never used. Factory tag. $200. Shipped. lafrancebiglou@al.com
Posted by: QuickBpBp

Nos 72-4 Barracuda Cuda gas cap - 12/28/17 12:14 PM

Nos 72-4 Cuda gas cap Very nice,Excellent plating just out of the box. $75 shipped.

Parts are located in SE PA.
Can send more pictures if interested.
Pm here on the board or e-mail bretts440"at"frontiernet.net
Thanks for free ad MOPARTS!
Posted by: TONY_DAGOSTINO

Re: E Body - Parts For Sale - 4th Quarter - 12/28/17 01:25 PM


4-speed tunnel hump closeout sale!!
Limited quantities remaining!
We’re going to stop carrying these,
So We’re Offering Them For Blowout Prices And Once Theyre Gone, Theyre Gone!
So don’t wait

67-up A-body $130,
E-body $130,
62-65 B-body $185
66-70 b-body $130,
71-74 b-body with console $130

302-398-0821

TONYSPARTS.COM

Harrington Delaware 19952
Posted by: moparply

Re: E Body - Parts For Sale - 4th Quarter - 12/28/17 02:06 PM

Original 1971 Cuda Road Lamp switch assembly. Includes the switch, nameplate and nameplate retaining nut. Wiring is in excellent untouched original condition. Original Chrysler switch assembly in excellent condition. $395




Email Kenei@comcast.net
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 12/28/17 07:17 PM

Thermostatic choke assembly for 1968, 1969 and 1970 426 HEMI rear carb complete used original part $400.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: E Body - Parts For Sale - 4th Quarter - 12/28/17 07:58 PM

One pair of NOS 1970 Dodge Challenger roof rear frame connectors that tie the roof frame to the quarter panels, these are not being reproduced by anyone, part#2963700 and 2963701 $575.00 for the pair (708)288-2879 Scott
Posted by: crabman173

Re: E Body - Parts For Sale - 4th Quarter - 12/31/17 10:34 AM

VACUUM NIPPLE

VERY HARD TO FIND IN GOOD CONDITION
This unit is almost perfect--these are crazy hard to find when you need one
$30 shipped free dusterdave173@gmail.com