Posted By: CRT
392 power steering issue - 09/22/18 02:46 AM
I have a 2015 392 in a truck with a crown Vic k member and rack n pinion. New power steering pump from Bouchillon and it keeps popn off the pressure side hose. It's a -6 braided line with an fitting. Any ideas what's going on ?
Posted By: aus370
Re: 392 power steering issue - 09/22/18 03:02 AM
With the pump putting out 1200 - 1600 psi , you will need to use the teflon hose and the appropiate fittings on the pressure side .
look for something with a rating of around 3000 psi , most of the fitting brands sell it and you can still assemble your self.
Posted By: GoodysGotaCuda
Re: 392 power steering issue - 09/22/18 03:07 AM
is it PTFE hose? Did you install the compression collars into the fitting?