Posted By: aus370
Hellcat main bearings. - 08/20/18 02:50 PM
Anyone here used the hellcat main bearings in a 6.4 .
Posted By: ahy
Re: Hellcat main bearings. - 08/25/18 12:32 AM
I have not and will share an idea.
The Hellcat bearings are probably a harder compound to deal with high cylinder pressure and rod loads. Harder also means less forgiving (dirt & clearance tolerance). If the "regular" 6.4 bearings do OK for you I would not change. If you need the tougher bearing, be careful.
Posted By: ric3xrt
Re: Hellcat main bearings. - 09/03/18 03:33 PM
Anyone here used the hellcat main bearings in a 6.4 .
are you asking if any one has modified a Non Hellcat block to use the twin oiling oil Bearings?
Yes.
Posted By: aus370
Re: Hellcat main bearings. - 09/04/18 01:55 PM
Just trying to find if theres any benifit using them, and if they are a direct fit.
Posted By: ric3xrt
Re: Hellcat main bearings. - 09/04/18 05:06 PM
Benefit= not sure, if you mod the main bearing saddle and add the grove from the main feed to the 2nd hole, I say yes.
just installing and not adding the extra oil grove, I would think no, but have never tried it .
Posted By: aus370
Re: Hellcat main bearings. - 09/05/18 09:36 AM
They were a little cheaper when i looked , and i thought if there was a benifit, why not . thanks for replys.