Posted By: MattW
RPM - 06/01/18 04:19 PM
How tight has anyone spun the new hemi to?
1 With stock rockers?
2 With aftermarket rockers?
Matt
A local drag pack guy told me they spun their 6.1 to 8500+ with stock rockers. His builder had done some lifter and oiling mods but he didn't know specifics.
Posted By: MattW
Re: RPM - 06/01/18 06:07 PM
TD has 2 set of rockers. One I didn't know about. It's a plate just like the jesel system.
But if they did indeed go 8500 rpm with stockers I would rather use the stock ones.
Matt
Posted By: dizuster
Re: RPM - 06/01/18 07:33 PM
I know my buddy's stocker goes to the moon (8500+) on stock stuff. Doesn't sound like it's anything to worry too much about.
Posted By: ric3xrt
Re: RPM - 06/02/18 02:55 AM
One thing is for sure the G3 hemis didn't get screwed in the rocker arm area like the old G2s did.
Posted By: fbs63
Re: RPM - 06/02/18 03:35 PM
Anyone try running lash caps yet?
Posted By: STEFF
Re: RPM - 06/04/18 11:53 AM
I buzz mine 7500-8000. T & D rockers, solid roller.
Didnt like the look of the rocker pad and lash caps thru its motion. Even after moving the shaft around, I just wasnt liking it. Cap looked like it could've been spit out.