Posted By: aus370
6.4 PISTONS - 04/01/18 04:06 AM
Looking around for pistons i don't see anything for stock stroke 6.4's .
I'd use something like a Molnar rod 6.200 length with .927 pin . I'd like around 11.3 comp so the Mahle drop ins won't work . Am i going to need something custom .
Posted By: Silver70
Re: 6.4 PISTONS - 04/01/18 04:42 AM
DSS Racing Pistons has a set that says 10.9 to 1 with 72cc heads... I have no idea what size 6.4s are.
Posted By: ric3xrt
Re: 6.4 PISTONS - 04/01/18 12:19 PM
Posted By: Silver70
Re: 6.4 PISTONS - 04/01/18 06:01 PM
I meant the chambers to figure out the compression as he said he wants to be at 11.3 to 1.
Posted By: aus370
Re: 6.4 PISTONS - 04/02/18 01:33 PM
6.4 heads are 73-74 cc . That gets around 10.9 with the manley 59880C piston , for a little under $700 a set, it's tempting , but a little more comp would be nice .
Posted By: Silver70
Re: 6.4 PISTONS - 04/02/18 05:40 PM
Mill the heads some, I took .020 off early 5.7 hemi heads and didn't have to change anything else. The dss pistons are around 550 a set.
Posted By: aus370
Re: 6.4 PISTONS - 04/03/18 02:17 AM
Prefer not to use up my heads , but will be contacting DSS . Thanks.