Posted By: aus370
WHAT PRIMARY PIPE ARE YOU USING. - 03/02/18 07:49 AM
On your 600 hp Plus G3 Hemis, What primary pipe size are you using.
Posted By: cagebob1
Re: WHAT PRIMARY PIPE ARE YOU USING. - 03/02/18 09:17 PM
my headers are 1 7/8 step to 2". engine dynoed at 695hp
Posted By: aus370
Re: WHAT PRIMARY PIPE ARE YOU USING. - 03/04/18 11:36 AM
I knew it , my 1 3/4's are too small , Damn it ! .
Posted By: RylisPro
Re: WHAT PRIMARY PIPE ARE YOU USING. - 03/04/18 11:53 AM
I make 600hp to the crank in my 426 Gen3 and run 1-3/4" headers
Posted By: aus370
Re: WHAT PRIMARY PIPE ARE YOU USING. - 03/04/18 02:08 PM
Now that's what i want to hear RylisPro lol's , it'd be interesting to see your dyno print out .
A while back i purchased the PipeMax software to figure out what to make for a stock 6.1 ( nothing available in right hand drive ) 1 3/4 worked out good for mid range tq and upper rpm hp .
Now when i type in the numbers for more Cubes , rpm , cam , valve sizes . PipeMax comes up with 1 7/8 - 2 1/8 .
just seeing what real results people have .
Posted By: aus370
Re: WHAT PRIMARY PIPE ARE YOU USING. - 03/05/18 01:35 PM
Ha you'd cut a good lap just leaving it in top gear . that's an eagle intake ? , what's your cam
Posted By: RylisPro
Re: WHAT PRIMARY PIPE ARE YOU USING. - 03/05/18 05:24 PM
My 6th gear is .63 only good for saving gas
Yes, Eagle intake. Just a small cam
Gross lift .584I/.552E
Dur@.5 229I/236E
Lobe sep 110