3g in a truck

Looking at doing a swap in a d100. Anyone have any experience with this? What headers will work? I've put a body sb headers in pickups before. Thought that maybe the route to take, or will a srt8 manifold work? Thanks

74 D-100, 77 D-150 and next up is a 75 4x2 Ramcharger(I'll take lots of photos when It starts in march)

Motor plate or mounts ?
http://bouchillonperformance.com/inc/sdetail/742

(74) Headers , we used a cheap set of Pacesetters for 05 Ram(2wd) had to bend and dent afew tubes .
(77) we did a custom set of headers, we used a set of Headman BB headers as a templet
, I think A-body G3 headers will work, I haven't tried it, and honestly I don't want to spend the money to find out if they will work.

Wow those mounts do not look complicated.

There not hard to make, I thought about taking asset of the V-6 or magnum mount brackets and seeing if I could weld a plate to them and go from there but, time vs $280ish , for me at this stage the $280 ish wins out, if they were over $300, I'd break out the welder and make my own.