Posted By: 1980volare
5.7 build plans - 08/13/17 11:42 PM
Starting to gather stuff for a low budget 5.7 build
How much power will an early 5.7 block hold? I've been hearing 1200whp with a short fill. I'd like to hear of other people with successful high HP 5.7 based builds.
Also, will the bottom of the bores need clearanced with a H beam rod?
Also, as far as coils are the 09+ coils different connector wise then the early ones?
I have H beam rods with a 4.05 stroke crank and have plenty of clearance stock.. as for the coils I believe 06 was when they were changed.. I believe 06+ will be the same connector and 05 and down will be a different connector..
Posted By: 1980volare
Re: 5.7 build plans - 08/14/17 09:04 PM
Thank you.. according to the parts stores the coils are the same for a 07 and a 2014.
I will be using a 3.795 stroke so I should be good.
Posted By: sycboi
Re: 5.7 build plans - 08/16/17 07:26 AM
I am using a nice 2003 5.7 Hemi block. Supposed to have somewhat thicker cylinder walls. I hear 1,000hp is doable in stock form. Koffle's Place in Huron, Ohio did all my machine work...
Posted By: 1980volare
Re: 5.7 build plans - 08/16/17 01:42 PM
Sweet, I've got a little filler left from my SB two years ago so I'll probably do a small fill, just in case.
Really worried about lifting the stock heads more then anything at his point.
Posted By: ric3xrt
Re: 5.7 build plans - 08/16/17 07:10 PM
Really worried about lifting the stock heads more then anything at his point.
There has been some serious boost put in to the G3's