Moparts

UPDATED WITH PICS ARROW SINGLE PLANE INTAKE

Posted By: hudsonhornet7x

UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 05/14/17 12:43 AM

There is a new intake on sale from arrow racing.

Single plane- engine guys please take a look

The intake is used in the Canadian Nascar series where Gen III hemi engines are legal.

Sorry for the crappy pics they were the best I could find.

Attached picture Cascar hemi.JPG
Attached picture C7HjsY4WwAEuI1t.jpg
Posted By: WO23Coronet

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/14/17 02:01 AM

That timing cover looks pretty interesting as well......
Posted By: ghinmi

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/14/17 02:20 AM

I like it. For $500 I'd consider buying one and converting it to efi.
Posted By: hudsonhornet7x

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/14/17 02:56 AM

Originally Posted By ghinmi
I like it. For $500 I'd consider buying one and converting it to efi.


Just found out they have an efi version available as well.
Posted By: ric3xrt

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/14/17 11:49 AM

now if we could get Roller Rockers,
it's great news the more parts that come out for these engines the better it is for everyone who wants to run one.
Love the valve sizes they list, 2.14 intake and 1.65 exhaust.
Thought about the Distributor timing cover at 1700 it's bit pricey but the more they sell the more the price comes down.
Posted By: Bad340fish

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/14/17 01:56 PM

I think Gen III is my next combo, I hope by then Holley will have a Hi-ram base for the G3.
Posted By: hudsonhornet7x

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/14/17 02:59 PM

Originally Posted By Bad340fish
I think Gen III is my next combo, I hope by then Holley will have a Hi-ram base for the G3.


Joe O'Cone from O C Performance has shown something similar to what you want. It is a prototype right now but I think there may be plans to produce it.
Posted By: STEFF

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/14/17 05:31 PM

Roller rockers are already available.
Posted By: sixpackgut

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/15/17 04:39 AM

If that plenum is extended to make the runner lengths more equal than I like it alot. $500 would be priced right too
Posted By: ric3xrt

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/15/17 01:27 PM

Originally Posted By STEFF
Roller rockers are already available.



I should of phrased better, I wish roller rockers were available
below 1k
Posted By: fbs63

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/15/17 01:54 PM

S
Originally Posted By hudsonhornet7x
Originally Posted By Bad340fish
I think Gen III is my next combo, I hope by then Holley will have a Hi-ram base for the G3.


Joe O'Cone from O C Performance has shown something similar to what you want. It is a prototype right now but I think there may be plans to produce it.

Any pics of this manifold? I checked out the website but didn't see any.
Posted By: STEFF

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/15/17 02:26 PM

Originally Posted By ric3xrt
Originally Posted By STEFF
Roller rockers are already available.



I should of phrased better, I wish roller rockers were available
below 1k



Not possible.
Posted By: 72Swinger

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/15/17 05:19 PM

Originally Posted By STEFF
Originally Posted By ric3xrt
Originally Posted By STEFF
Roller rockers are already available.



I should of phrased better, I wish roller rockers were available
below 1k



Not possible.

Yeah twice the shafts and hold downs is one reason, and they are intricate to say the least.
Posted By: fbs63

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/15/17 06:05 PM

The price is right in line with quality Gen II rocker gear.
Posted By: STEFF

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/15/17 06:29 PM

Originally Posted By fbs63
The price is right in line with quality Gen II rocker gear.


Exactly!!
Posted By: hudsonhornet7x

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/15/17 06:58 PM

More Info on the Arrow Racing Intake:


5.900 " from intake flange to carb pad.

Posted By: sixpackgut

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/15/17 08:47 PM

What about the heads? Can you buy them?
Posted By: sixpackgut

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/15/17 08:48 PM

What about the heads? Can you buy them?
Posted By: sixpackgut

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/17/17 08:28 PM

Called Arrow and shot the [censored] with them for a bit.

This engine cost 27k. Uses stock rockers. The alternator on these nascar type engines cost 2k. They are running titanium valves that are coated on stock seats. They drill an .025 hole in exhaust shaft to spray oil on exhaust valves all the time. These engines make around 480hp with a 390 carb and a plate with i think he said 1 1/16ths holes. Will make over 600hp with a 750 carb.

He said they use stock rockers and apache valves in the trans am series. Never broke a valve but said on a spintron the intake valve starts losing control over 7000 rpm. They primarily run a PSI 1511 in everything and change them often but said they never broke a stock apache valve
Posted By: cudadoug

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/22/17 04:56 PM

Got a quote back from Arrow on the intake:

$1200 plus the ride. Ouch...
Posted By: hudsonhornet7x

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/22/17 05:06 PM

Are you sure you are talking about this intake? Most guys are saying $ 550. Wow if it is 1200!
Posted By: cudadoug

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/22/17 05:39 PM

I sent them a pic to confirm. Stay tuned.
Posted By: cudadoug

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/22/17 05:46 PM

Confirmed, $550!

Doug,

I was thinking the tall Drag Pak intake sorry,

The CASCAR Manifold is $550. + Shipping. Also in stock

Dale R. Matthews
Program Manager/Calibration Engineer

Prefix Arrow Racing, LLC
Posted By: Triple Threat

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/22/17 06:27 PM

Wonder what the power difference is between the Arrow and a Ritter.

Someone needs to be the test dummy.
Posted By: cudadoug

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/22/17 07:14 PM

Originally Posted By Triple Threat
Wonder what the power difference is between the Arrow and a Ritter.

Someone needs to be the test dummy.


I can do the Gen 3 dummy part real well...
Posted By: hudsonhornet7x

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 05/24/17 02:05 AM

Here are some better pics of the intake:

Attached picture IMG_0945.JPG
Attached picture IMG_0946.JPG
Attached picture IMG_0947.JPG
Posted By: hudsonhornet7x

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 05/24/17 02:06 AM

A couple more pics. What do you guys think?

Attached picture IMG_0948.JPG
Attached picture IMG_0949.JPG
Posted By: ric3xrt

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 05/24/17 02:11 AM

Looks purrty.
Posted By: sixpackgut

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 05/24/17 04:43 AM

Port size at the head looks much better than the Ritter DP intake. Port taper doesn't look as good though. The Ritter DP intake has more of a ^ bottom. This intake floor looks flat. This intake might have better port alighnment at the head than the DP. The Ritter intake to me seems to have more equal lenght runners
Posted By: Just-a-dart

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 05/24/17 05:21 AM

Thanks for the pics, this may change my plans.
Posted By: hudsonhornet7x

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 05/24/17 05:26 AM

No problem, glad I can contribute something to Moparts!
Posted By: hudsonhornet7x

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 05/24/17 05:31 AM

How about this intake with a 90* elbow and a centrifugal supercharger or turbo's?
Posted By: 72Swinger

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 05/24/17 06:50 AM

Be a great boost intake. A DP intake milled down like this one would be good to.
Posted By: pittsburghracer

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 05/24/17 11:50 AM

Very nice looking intake for one out of the box. Someone has their act together
Posted By: WO23Coronet

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 05/24/17 01:35 PM

Very nice
Posted By: HotRodDave

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 05/24/17 07:32 PM

Just looking at it I bet its a great carb intake, probably a little less TQ than the DP (shorter runners) and a tad less HP (more curve to the runners) but it would have a better chance fitting under a hood. I would also think a 6.4 plastic intake may be a better choice for injection because of the heat rejection aspect.
Posted By: Just-a-dart

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/26/17 02:00 AM

Originally Posted By cudadoug
Confirmed, $550!

Doug,

I was thinking the tall Drag Pak intake sorry,

The CASCAR Manifold is $550. + Shipping. Also in stock

Dale R. Matthews
Program Manager/Calibration Engineer

Prefix Arrow Racing, LLC











Apparently us west coasters get to pay more, I ordered one today for $575

Edit: plus shipping
Posted By: hudsonhornet7x

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/26/17 02:12 AM

$ 550 plus shipping?
Posted By: Triple Threat

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/26/17 04:16 PM

Originally Posted By Just-a-dart


Apparently us west coasters get to pay more, I ordered one today for $575

Edit: plus shipping


Send it up this way Rod, I'll back to back it against the Ritter thumbs
Posted By: w2stroker

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/26/17 04:47 PM

I have a gen 3 at imm engines that Brian should have on the dyno soon. it has the tall ritter intake on it. we could get Brian to compare back to back with actual numbers smile
Posted By: Just-a-dart

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 05/30/17 01:01 AM

Originally Posted By w2stroker
I have a gen 3 at imm engines that Brian should have on the dyno soon. it has the tall ritter intake on it. we could get Brian to compare back to back with actual numbers smile


That would be interesting. PM me, we can work out the details.
Posted By: Medlock51

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 06/19/17 06:30 PM

what's the Ritter intake cost?
Posted By: Jamey

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 07/21/17 04:39 AM

So much for $550!!

http://www.arrowracingengines.com/images/600_IMG_2264.JPG

Up to $630 plus shipping now!
Posted By: L4staero

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 08/05/17 08:08 AM

hudsonhornet7x how did u get those valve covers? I think u should give them to me
Posted By: Supercuda

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 08/05/17 01:06 PM

Originally Posted By Jamey
So much for $550!!

http://www.arrowracingengines.com/images/600_IMG_2264.JPG

Up to $630 plus shipping now!


That's the EFI intake, not the carb one.
Posted By: Jamey

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 08/06/17 07:05 PM

Originally Posted By Supercuda
Originally Posted By Jamey
So much for $550!!

http://www.arrowracingengines.com/images/600_IMG_2264.JPG

Up to $630 plus shipping now!


That's the EFI intake, not the carb one.


Yeah, I know it's for efi, but didn't think it'd cost any more than the carb version. They only ad 8 holes for the injectors. Plus the fuel rails and injectors aren't included. Not a big deal though, this hobby isn't cheap.
Posted By: tzclark

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 12/28/17 01:36 AM

Does anyone know what injectors the efi version takes as well as can it be opened up to a 4500 series?
Posted By: Dragula

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 12/30/17 08:57 PM

Originally Posted By Jamey
Originally Posted By Supercuda
Originally Posted By Jamey
So much for $550!!

http://www.arrowracingengines.com/images/600_IMG_2264.JPG

Up to $630 plus shipping now!


That's the EFI intake, not the carb one.


Yeah, I know it's for efi, but didn't think it'd cost any more than the carb version. They only ad 8 holes for the injectors. Plus the fuel rails and injectors aren't included. Not a big deal though, this hobby isn't cheap.


What happened to the damn website?
Posted By: fbs63

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 12/30/17 09:35 PM

Arrow Racing was bought out by the company that comes up.
Posted By: ric3xrt

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 12/30/17 10:12 PM



What happened to the damn website? [/quote]







That's what I said, thought someone forgot to make a payment on the website hosting service.
Posted By: 340Cuda

Re: CASCAR Hemi Intake by Arrow Racing on sale now - 12/31/17 05:31 PM

Yes and no mention of any performance parts on the new website...
Posted By: EagleDuster

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 12/31/17 09:47 PM

It's on the site you just have to dig for it a bit. Click on 'Performance', then 'Prefix Performance Parts' it should bring you to a list that includes the intake

Prefix/Arrow perf parts
Posted By: ric3xrt

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 01/01/18 01:56 PM

On my Tablet and Phone the Performance links don't work, but on my desk top at work I can get to what they offer in performance parts.


Click on Capabilities scroll down to Performance, click on that scroll down again to Additional Information and under that there are two thumbnails, one for the Minotaur flyer and the other Prefix Performance Products. took me a awhile to realize where it was.
Posted By: BBR

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 01/09/18 11:05 PM

Carb intake is not listed. Just the EFI one. Boo.
Posted By: PREFIX

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 01/31/18 03:21 PM

Good Morning.

My name is Jordan Howard and I run the performance sales for Prefix who bought out arrow racing. We still offer all the performance parts that arrow did for the hemi just as prefix now. We still have the carb version mid rise cascar manifold that you where talking about. Please anyone with any questions regarding parts give me a call at 248,797,4083 or email at Jordan.howard@prefix.com.
Posted By: 340Cuda

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 01/31/18 04:02 PM

Thanks Jordan!
Posted By: ric3xrt

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 01/31/18 04:44 PM

Thank you Jordan,

Any plans on expanding the product list of G3 hemi parts?
Posted By: PREFIX

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 01/31/18 06:50 PM

Guys.

Here is and updated list of the parts we have and offer right now. We also have a few new things in our facility including two engine dynos, Spin tron and a chassis dyno.


Hemi Drag Pak Manifold (2015), tall plenum, 8.5" from head flange to TB flange. For 5.7L/6.1L/6.4L P50049330AC $1,250.00

Hemi Drag Pak Manifold adaptor for 4150 to 4500 throttle body, need to remove 38mm from manifold to use ARR-9330 $360.00

Hemi CASCAR Manifold, Mid-Rise, 5.9'' from head flange to TB flange. For 5.7L/6.1L/6.4L ARR-CAS-1010 $575.00

Hemi CASCAR Manifold, Mid-Rise, 5.9'' from head flange to TB flange. For 5.7L/6.1L/6.4L, EFI version ARR-7509-M $630.00

Hemi Gasket for Drag Pak and CASCAR intake manifolds ARR-1R1312060KF $14.00

Hemi Carb Stud Kit for CASCAR manifold (ARP) ARR-2403 $30.00
Hemi fuel rail kit for Drag Pak Manifold, black anodized with -8AN fittings ARR-3783 $270.00

Hemi CASCAR billet aluminum fuel rail brackets ARR-CRT-FUELBKT $25.00 EACH

Hemi CASCAR billet aluminum oil fill adaptor ARR-CRT-OILADPT $244.00

Cylinder Heads and ValveTrain
Hemi 6.4L Apache CNC cylinder heads, mild port, with stock valves, no valvetrain ARR-6555HO/6556HO $3,836.60

Hemi Cast Aluminum Rocker Covers, black wrinkle finish, taller than stock, can use T&D rockers. For 5.7L/6.1L/6.4L ARR-2086 $840.00

Hemi Titanium Intake valve for ARR-6555HO/6556HO cylinder heads, 2.140" diameter ARR-CAS-1340 $149.00

Hemi Titanium Exhaust valve for ARR-6555HO/6556HO cylinder heads, 1.650" diameter TTE-1650-5090T $100.00

Hemi Locks (single groove) for Titanium valves ARR-CAS-1340 ARR-CAS-1330 $17.00

Hemi Ti Retainer for Stock 6.4L or PSI1500 series style springs ARR-CAS-1320 $31.00

Hemi Steel Reatiner for Stock 6.4L or PSI1500 series style springs ARR-761 $4.00

Hemi Steel spring seat for PSI 1500 series springs, fits 6.4L Apache cylinder heads ARR-1270 $5.00

Hemi PSI1511 springs (set), fit 6.4L Apache cylinder heads, max valve lift is 0.625" ARR-1511ML $280.00

Hemi Comp 7230 springs (set), fit 6.4L Apache cylinder heads, max valve lift is 0.675" ARR-7230-16 $290.00

Head Stud Kit
Hemi Head Stud Kit (A1), will fit Aluminum Gen3 6.1L blocks ONLY P5155517 $249.00

Front Distributor Kit and Fuel Pump
Hemi Front Distributor Kit, kits are for Gen3 6.1L blocks ONLY ARR-5929 $1,670.00

Hemi mechancial fuel pump (Holley B engine) for ARR-5929 Kit ARR-CAS-1230 $140.00

Hemi Distributor (Crane) ARR-1820-DIST $520.00

Hemi Distributor Plug Wires (Crane) ARR-1820-WIRES $86.00

Adjustable Camshaft Timing Gear
Hemi Adjustable Camshaft Timing Gear with offest bushings (0,2,4,6,and 8 degree), will fit Gen3 6.1L blocks ONLY TBD $200.00

Hemi Adjustable Camshaft Timing Gear, offset bushings ONLY (0,2,4,6,and 8 degree bushings) ARR-61DB-0 thu 8 $25.00

Aluminum Engine Blocks
Hemi Aluminum 6.1L engine block with billet main caps, unhoned at 4.114", up to 4.185", crank honed P5153898 $3,750.00

Hemi Aluminum 6.1L engine block with billet main caps, honed 4.125", up to 4.155", crank honed P5155507 $3,750.00

Hemi Crate Engines
Hemi 392 Crate engine, EFI, with Holley HP control system, cast iron block, 540HP ARR-392CE $16,995.00

Hemi 426 Crate engine, EFI, with Holley HP control system, aluminum block, 620HP ARR-426CE $19,995.00

Hemi 426 Crate engine, with Carburetor/Distributor/Fuel pump, aluminum block, 620HP TBD



Posted By: RylisPro

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 06/27/18 11:03 PM

Hey Everyone,
I'm also a dealer for Prefix Performance and work with Jordan directly. Prefix has complete engine assemblies as well as intakes and aluminum blocks. They build Gen3 Hemi's as well as Ford and Chevy engines for the TA2 series.


We just sent out the tall Drag Pak intake P5004933AC pictured here to a member on the forums and it looks great!
Posted By: pittsburghracer

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 06/28/18 12:28 AM

Looks like some very nice products are being produced.
Posted By: RylisPro

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 10/10/18 11:34 AM

Hey Everyone,
Just got word from Prefix yesterday that they have the following:

4 pcs - P5049330AC Drag Pak intakes

6 pcs – ARR-CAS-1010 (CASCAR Carbureted manifold)

3 pcs – ARR-7509-M (CASCAR Fuel injected manifold)

Pricing is on our "RylisPro" instagram page. If you want to order, please email us your address at RylisPro@gmail.com to get a shipping quote to drop ship the above parts from Prefix.

Unfortunately Jordan is not with Prefix anymore but we can help with ordering.

Thanks!
Posted By: YeahItsAHemi

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 10/22/18 03:48 PM

New here but not to Hemi forums. I’ve got a 5.7 based 392 stroker in my ram 1500. Im building it for street/strip. It probably weighs about 5300 lbs, Racing will be with 2wd and slicks. I swapped to a built 46re and a CRT valvebody, running 4.56 gears. I’m working on doing a 5.7 eagle head swap with the 5.7 eagle truck intake. But these single plane intakes are interesting me, my question is how much torque do these lose over the plastic intakes? With a heavy truck I don’t want to lose much more torque. I’ll be running around 10.8 compression and an Inertia stroker cam. Any input on these arrow I takes for my build?
Posted By: HotRodDave

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 10/22/18 09:15 PM

What cam are you running? What fuel?

The plastic one keeps the air a lot cooler also so it works better with pump gas and high compression. Unless I was running a real big cam I would keep the plastic one for the cooler air and longer TQ oriented runners.
Posted By: YeahItsAHemi

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 10/22/18 09:21 PM

231/240 duration, .556/.560 lift. Nothing too crazy. Pump 93 gas. Right now I have the pre-eagle heads and truck intake and it really needs some pick me up. Hoping to get some more power from the eagle heads. I’m planning on utilizing the active runners in the newer truck intake with an rpm window switch. I want to get maximum power out of it N/A before I go with a turbo setup later
Posted By: HotRodDave

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 10/23/18 07:27 PM

the eagle top end will really pick that thing up
Posted By: ZIPPY

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 10/25/18 06:35 PM

Really great looking parts.
Nice to see somebody (anybody) working on this stuff, still.

Back when I had the opportunity, I collected the granddaddy, the 392 crate motor carbureted intake, which had quite a story behind it.

I've been letting alot of pieces go lately, but that one is not for sale.

Posted By: ZIPPY

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 10/25/18 06:39 PM

So, the other day I came across this 2 piece LS manifold.

Though I am much less knowledgeable about aluminum casting than I wish I was....I couldn't help but wonder, wouldn't a 2 piece casting for GenIII offer some benefit. Could it be less expensive to produce...

https://www.hotrod.com/articles/quick-tech-holleys-new-two-piece-cathedral-port-intake/
Posted By: Kiddart

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 10/25/18 09:12 PM

you would think it would be but nobody will take the leap of faith to produce things that are cost effective for mopars. this is such a crazy hobby we all have
Posted By: ChrgrCuda

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 05/22/19 04:37 PM

Just getting into this Gen 3 stuff, and bought the last EFI version of the Prefix manifold. Wow, yes, very expensive. My wallet just got it's ass handed to it.
Posted By: hudsonhornet7x

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 05/22/19 05:06 PM

Originally Posted by ChrgrCuda
Just getting into this Gen 3 stuff, and bought the last EFI version of the Prefix manifold. Wow, yes, very expensive. My wallet just got it's ass handed to it.


Yes but when you spend $100 on good used rockers it evens out! Plus the heads are a killer deal for the air they flow.
Posted By: ChrgrCuda

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 05/22/19 05:12 PM

Originally Posted by hudsonhornet7x
Originally Posted by ChrgrCuda
Just getting into this Gen 3 stuff, and bought the last EFI version of the Prefix manifold. Wow, yes, very expensive. My wallet just got it's ass handed to it.


Yes but when you spend $100 on good used rockers it evens out! Plus the heads are a killer deal for the air they flow.


Very true. Potential on these G3's seem to be extreme when compare to my old SB and BB equipment.
Posted By: cudadoug

Re: UPDATED WITH PICS ARROW SINGLE PLANE INTAKE - 05/23/19 03:53 PM

Originally Posted by ChrgrCuda
Originally Posted by hudsonhornet7x
Originally Posted by ChrgrCuda
Just getting into this Gen 3 stuff, and bought the last EFI version of the Prefix manifold. Wow, yes, very expensive. My wallet just got it's ass handed to it.


Yes but when you spend $100 on good used rockers it evens out! Plus the heads are a killer deal for the air they flow.


Very true. Potential on these G3's seem to be extreme when compare to my old SB and BB equipment.


Yes, they do. What started me was a $400 set of Eagle heads w/rockers and shafts. Nothing ventured, nothing gained, right? When they went 298 @ .600" in OE form, I became a G3 believer!
© 2024 Moparts Forums