T56 and T56 Magnum oil pump

Been thinking again,this isn't always great and adds even more time to my build, and I think im gonna put a sprayer and pump on my T56. Seems like a good insurance policy for their lifespan. Upon hard excelleration, ROAD RACING, Standing mile stuff etc., as you could imagine all the oil goes to the rear of trans and starves the input bearing and 4th gear/counter shaft bearings. This creates heat in the trans and eventual failure. Even 9 sec. cars have experienced this phenomena in that short of a time span. A simple scavenge pump sucking from the drain hole and spraying at the input bearing, which as a result will also oil the 4th gear, is a good add on and the circulation alone doesn't keep it cool enough I can add a cooler later. I think I will have the pump come on and stay at or above 4000 rpm.

I've pondered about this as well. I know Tick Performance does this mod on the upgrades they sell for T56's.
You have to add your own pump but it shouldn't be difficult to plumb.

Why not for very little extra effort include at least the simplest cooler?

Quote:

---

Why not for very little extra effort include at least the simplest cooler?

---

I hear ya, the thinking is that with the pump the temp issue is also remedied.