Posted By: relax383
QA1 Dynamic Strut Rods - 11/20/13 06:20 AM
Hey guys was considering upgrading my stock strut rods on my 70 RR.The dynamic QA1s caught my eye. I am still a bit of a novice so I was curious what advantage they would have over the originals and if you guys think they would be a good addition to a daily driver?
I already have a K member reinforced by Firm Feel and Tubular UCAs and boxed LCA.
Posted By: Dan@Hotchkis
Re: QA1 Dynamic Strut Rods - 11/20/13 02:09 PM
Our strut rods provide the proper interference fit in the LCA mounting hole, and our latest design incorporates a hex into the strut rod for easy adjustments.
Posted By: relax383
Re: QA1 Dynamic Strut Rods - 11/20/13 03:04 PM
is there a new part number?
Posted By: Viol8r
Re: QA1 Dynamic Strut Rods - 11/20/13 03:25 PM
QA1 Precision Products 52312 - QA1 Dynamc Adjustable Strut Barsrs-I run these on my car, very nice and easy to work with.
Posted By: ahy
Re: QA1 Dynamic Strut Rods - 11/21/13 03:22 AM
I think of the adjustable rods as a problem solver, especially with poly LCA bushings. Factory tolerances were maybe not so tight and who knows what may have happened to the K over the years. If you have geometry/alignment/strut length issues, the adjustables can solve it. I'm using them on an E with poly LCA bushings. With stock rods, there was ~1/8" gap on the thrust surface of the LCA bushing on the left and the alignment would not come in. The adjustables fixed that problem. Alignment is right where I want it now. Just don't crank them too far forward or the bushing will take a beating. If alignment now is OK and no other problems, I believe stock is fine.
I am using FF pieces which are nice. I'm sure others are also.
Posted By: Triple Threat
Re: QA1 Dynamic Strut Rods - 11/21/13 11:38 PM
I run them, they helped the front end of my car @130 mph. Not sure you'll notice much difference on a daily driver.