Hole for 4 speed under hump. Need pics size

I need to install my 4 speed hump in the 69 Charger I am working on. Does anyone have a pic of the hole that is cut out of the floorpan for the shifter? Thanks in advanced. Mike

Speaking from personal experience. Make an outline of the hump on the floor before you weld it in and just cut out that whole area leaving enough to weld to. You will need the area for clearance and if you leave an overhang it is just somewhere for junk (leaves,dirt,etc;) to sit and and cause corrosion.

This question comes up 'bout once every 60 days......maybe this pic ought'a be archived.......removed from a July 15th built 68 Road Runner but should be the same for all 66 - 70 B bodies.

Yes, that is what it looks like. This is a 70 RR original. As i said, the entire area is opened up.

I hit the mod notify, maybe in tech archives under trans. Thanks guys Mike