Moparts

Low mount alternator kits??

Posted By: Troy

Low mount alternator kits?? - 12/18/08 12:49 AM

Show me your low mount alternator brackets for a big block.

What brand should I use.

Thanks!!
Posted By: cudabunch

Re: Low mount alternator kits?? - 12/18/08 01:07 AM

i dont have a photo but you can see them at Mancicni racing.I think Andy makes them.
Posted By: Dragula

Re: Low mount alternator kits?? - 12/18/08 02:19 AM



Attached picture 4885968-S_hemi982(27).JPG
Posted By: 4404dart

Re: Low mount alternator kits?? - 12/18/08 02:24 AM

This is a Magnum HP kit, with a 100 amp mini alt.
Sorry about the pic, I took it with the engine on the stand upside down, then rotated it, but it looks funny.
Posted By: 5537SG

Re: Low mount alternator kits?? - 12/18/08 02:42 AM

The DMI ones that Magnum HP sells are awesome. I bought 2 so far with their pulleys, and they are head and shoulders above any other cobbled up junk on the market.
Posted By: AndyF

Re: Low mount alternator kits?? - 12/18/08 06:09 AM

I have a setup that works with a motorplate. The motorplates that I sell come with the hole locations marked for this mount.

Attached picture 4886395-motorplate.jpg
Posted By: Al_Alguire

Re: Low mount alternator kits?? - 12/18/08 06:10 AM

Another vote for the DMI set up..
Posted By: SRT8Challenger

Re: Low mount alternator kits?? - 12/18/08 12:38 PM

Will the DMI fit with a motor plate? Or just the elephant ears?
Thanks,
Ed
Posted By: Bigcube

Re: Low mount alternator kits?? - 12/18/08 12:44 PM

Quote:

Will the DMI fit with a motor plate? Or just the elephant ears?
Thanks,
Ed


You may need too trim the plate but it will work. It can be set up to also be a crank trigger bracket. They make one for the std size pickuo and also a mini sized pickup. I needed the smaller pickup because my frame rails are narrow and the big pickup was very close to the alternator.

Big pickup.

Small pickup
Posted By: modelmakerinc

Re: Low mount alternator kits?? - 12/18/08 12:49 PM

I have the DMI one also, It is a very nice piece. I did add an addtional brace to the backside of the altenator mount to just steady the alt at high revs.
Posted By: Anonymous

Re: Low mount alternator kits?? - 12/18/08 01:44 PM

looks nice, clean and easy to set up.
Posted By: G_bob

Re: Low mount alternator kits?? - 12/18/08 02:50 PM

Quote:

I have a setup that works with a motorplate. The motorplates that I sell come with the hole locations marked for this mount.



Andy,
Where can your plate and brackets be purchased?
Posted By: Al_Alguire

Re: Low mount alternator kits?? - 12/18/08 03:15 PM

Quote:

Quote:

I have a setup that works with a motorplate. The motorplates that I sell come with the hole locations marked for this mount.



Andy,
Where can your plate and brackets be purchased?



Mancini sells Andy's stuff
Posted By: AndyF

Re: Low mount alternator kits?? - 12/18/08 04:45 PM

Quote:

Will the DMI fit with a motor plate? Or just the elephant ears?
Thanks,
Ed



I modified the CNC profile on my motorplates some time back so they'll work with the Doty bracket. Personally I'd rather hang the alternator from the motor plate if it is there but there might be reasons why people want to combine the two things together.
Posted By: AndyF

Re: Low mount alternator kits?? - 12/18/08 04:47 PM

Quote:

Quote:

I have a setup that works with a motorplate. The motorplates that I sell come with the hole locations marked for this mount.



Andy,
Where can your plate and brackets be purchased?



Mancini carries them but Bob Mazzolini is a dealer for AR Engineering stuff so you can always swing by his shop. Bob doesn't usually stock the motor plates or alternator mounts but maybe nobody has ever asked him for them.
Posted By: mac56

Re: Low mount alternator kits?? - 12/18/08 05:38 PM

Magnum hp's web site says temporarily closed.
Posted By: sc301v

Re: Low mount alternator kits?? - 12/18/08 06:24 PM

Quote:

Quote:

Will the DMI fit with a motor plate? Or just the elephant ears?
Thanks,
Ed


You may need too trim the plate but it will work. It can be set up to also be a crank trigger bracket. They make one for the std size pickuo and also a mini sized pickup. I needed the smaller pickup because my frame rails are narrow and the big pickup was very close to the alternator.

Big pickup.

Small pickup




Can i ask which valve covers are on that motor..Didnt want to hijack the thread.
Posted By: Bigcube

Re: Low mount alternator kits?? - 12/18/08 08:43 PM

Quote:

Can i ask which valve covers are on that motor..Didnt want to hijack the thread.


Check your PM's
Posted By: jcc

Re: Low mount alternator kits?? - 12/19/08 11:50 AM

Quote:

Magnum hp's web site says temporarily closed.



Does that mean what it looks like?
© 2024 Moparts Forums