Small Block dist ?

Anyone know where I can get the nylon sleeve (thrust collar)that is held on the shaft with a drift pin?



Finally found a source. Phillbin Group out of Portland, OR.

They blueprinted my tach drive distributor a few years ago. Totally forgot about them.

http://philbingroup.com/about_us.htm


Mods.... Can we get this put into the tech library?

http://www.ebay.com/itm/NOS-Mopar-Distri...722&vxp=mtr

there is one place.

Yep, that's the one. Kinda like to find one locally. Parts store item?

I was thinking some posted an item from Menards or Lowes that was nearly identical. Might do some shopping out there & see what you see. It has a 1/2" ID EDIT If you have a parts dist you could rob the collar off of it & take this opportunity to reduce the end play to .005". www.speedwaymotors.com has a kit of washers for $5 or your ACE hardware store

Yeah, I'll check out those places tomorrow. will also check Napa. i'd put another dis in but this one has been set up on a dist machine