1969 Roadrunner convertible,, HEMI power

While the Cuda is out getting the top and headliner installed this was in the shop today.
Nothing major , Just a little bit of work.
Making some new trans cooler and fuel pump to carb lines. and fixing some leaks in the rear axle. and tried to fit some subframe connectors.


It is a real RM27 car , but born with a 383
It's one of the Mopar stock bore / stroke 426 crate motors .

Enjoy!

power plant
Talk about one cold natured sonofagun

Trying to make trans lines from scratch with the engine/trans in car,, top it off with TTI headers in the way was almost fun,,almost

The easy end

Subframe connectors fit , I'll just say was far less than ideal.

other side, same side of the car

again

drivers side rail isn't near as bad,but is going to take some work to make fit

Bill nice RR, did the frame connectors come from US Tool? Just bought a set from them, I havent put them on yet.

Quote:

---

Bill nice RR, did the frame connectors come from US Tool? Just bought a set from them, I havent put them on yet.

---

I'm not 100% sure ,,,but I think he bought them from XV motor sports