Moparts
67 Barracuda roller
Posted By:
dssaa
67 Barracuda roller -
04/28/24
05:27 PM
https:/
/
www.facebook.com/
marketplace/
item/
974564967366607
This is way to close to me for comfort...
Posted By:
Neil
Re: 67 Barracuda roller -
04/28/24
06:31 PM
Cheap enough so even if it needs work it may not be a bad deal.
Wonder what the paint looks like up close?
Posted By:
mopacltd
Re: 67 Barracuda roller -
04/28/24
07:18 PM
I don't do ebag, but would like to see ad.
Posted By:
stumpy
Re: 67 Barracuda roller -
04/28/24
07:47 PM
Click on the given link.
Posted By:
nuthinbutmopar
Re: 67 Barracuda roller -
04/28/24
08:42 PM
Front end is sitting awful low for no drivetrain...
Posted By:
oldjonny
Re: 67 Barracuda roller -
04/28/24
09:33 PM
Its facebook marketplace. Just click the link. Nobody will track you down.
Posted By:
67vertman
Re: 67 Barracuda roller -
04/28/24
09:33 PM
Originally Posted by mopacltd
I don't do ebag, but would like to see ad.
67 Notch....$4000
Posted By:
oldjonny
Re: 67 Barracuda roller -
04/28/24
09:33 PM
Originally Posted by nuthinbutmopar
Front end is sitting awful low for no drivetrain...
Agreed. I suspect the the torsion bars are rotted out of the car.
Posted By:
dssaa
Re: 67 Barracuda roller -
04/29/24
12:48 AM
Originally Posted by oldjonny
Originally Posted by nuthinbutmopar
Front end is sitting awful low for no drivetrain...
Agreed. I suspect the the torsion bars are rotted out of the car.
I was thinking the same thing. No front or rear glass=no front or rear floors=no frame rails.
Posted By:
BigBlockGTS
Re: 67 Barracuda roller -
04/29/24
01:26 PM
No way to tell but the body looks pretty good for the floors and torsion bar support scenario. Could be an abandoned restoration and the bars could just not be cranked up.
Posted By:
oldjonny
Re: 67 Barracuda roller -
04/29/24
03:46 PM
I don't see $4K myself...and I own a '67 fastback
© 2024
Moparts Forums