Posted By: DaveRS23
Edelbrock big block heads; $900
Posted By: oldjonny
Re: Edelbrock big block heads; $900 - 12/19/23 12:03 AM
He says issues in one cylinder, but around the plug area, looks like it was welded?
Posted By: TJP
Re: Edelbrock big block heads; $900 - 12/19/23 02:45 AM
Originally Posted by oldjonny
He says issues in one cylinder, but around the plug area, looks like it was welded?
Agrred and I wouldn't run em
Posted By: migsBIG
Re: Edelbrock big block heads; $900 - 12/19/23 02:54 AM
Dang, the cylinder looks Like it’s going to need a few hundred bucks to fix it. Unless you did your own machine work, would be better off with a new set.
Posted By: autoxcuda
Re: Edelbrock big block heads; $900 - 12/19/23 03:50 AM
It was just “detonation”. 
If weld was ok, would have some promise. But should have welded up some of the chamber cuts. I’d be afraid of smoothing those down and loosing the cc’s in that chamber.
They do have a valve job. Some nefarious flipper will buy them and stick them on a “compete rebuilt motor” on Facebook from a private party. Unsuspecting buyer.
If weld was ok, would have some promise. But should have welded up some of the chamber cuts. I’d be afraid of smoothing those down and loosing the cc’s in that chamber.
They do have a valve job. Some nefarious flipper will buy them and stick them on a “compete rebuilt motor” on Facebook from a private party. Unsuspecting buyer.