CRT 518 Big Block Mopar - Moparts Hot Deal

>CLICK HERE> https://www.youtube.com/watch?v=EB0ep5eyyQg&t=1s <CLICK HERE<

free shipping to commercial address in the lower 48 ONLY


( for Moparts Hot Deals & New Products section )

Looks like a nice piece John.

Thanks Jeff

Very cool !!!

nevermind just watched the video

Very cool, John.

Hmmmm, lets see, pull the hi CR pistons out of my 528, stroke to 557, add the 518, find a nice 1968 Dodge coronet, some 3.54 gears, go cruising!

Any threads on installing this 518 into a 69 B-Body?

Did I hear you mention the HP limit is 550?

No limits. This one is 500-550

Interested ! But my car is a 65 C body with the cable shift on the column. Any thoughts on getting that to all work ? Engine is a 496 making about 550 hp

Thanks !

No limits as in a 750 HP model is available? and what mods to fit the E body?

Thanks for your time.
Damon

Doug Miller at Fireball Automatics made one work with pushbuttons in his 64 Hemi Belvedere wagon so it should be doable. Imperial services used to sell a kit to do it and I suspect Doug might have used it on his.

Nice C!

Kevin

I can do 750hp I can go 1500HP if needed
We offer a trans brake if needed.

Does this still require transmission tunnel clearancing?

YES it does , and a cross member

With the manual valvebody does it freewheel in first?

NO, because it has low band apply

Does this work with a lockup converter for the 750 hp level?
If so would it be a manual switch or?