1956 pickup mustang 2 oil pan clearance

56 pickup with a 305 Chevy. Just put street rod engineering front suspension. I have a problem with the oil pan clearing it . Anyone deal with this or possible idea's for oil pan

Is the sump of the oil pan at the rear of the engine?

Yes it's hitting the new crossmember

Problem is the wrong engine

In general, each engine family will have front sump, center sump and rear sump oil pans. There is a different pickup tube for each style.

As this is a Mopar site, you'll have trouble getting anyone to tell you much about a smallblock Chevy oil pan. Plus, the location of the new suspension crossmember must be taken into account. We aren't knowledgable about that either.

You have already started catching flak for putting a non-Mopar engine in a Mopar vehicle. Sorry, that will certainly happen.

R.

64 thru 67 Chevy II 283 and 327 used a front sump pan and a different pump with a long pick-up that matches up with only that pan and pump.