33 radiator???

Hi guys. Where do you guys suggest I get a radiator with a trans cooler in it? Or even one without? Its for a 33 Plymouth. Also how about a spot to get the door glass? The glass in my dad's 33 Plymouth seems sloppy, almost like its not long enough front to back, and it seems to bind a little as is goes up. Thanks, Clint

For the hot rods I always get the glass from this guy.
http://www.bobsclassicautoglass.com/

http://www.prchotrod.com/


They will build a radiator to your specs , they will build a shroud with a Spal fan built in . They built the radiator for my '38 , it cools great with my 408 .

My 33 is not a stock configuration ( cowl is laid back farther than stock and top is chopped ), but I used a Speedway aluminum 32 Ford Rad. that I had to make some miner mods to ( upper tank)for it to fit my application. On the door glass, just make yourself a cardboard template that fits your glass runners and take it to your local glass company and they can cut it for you.

Thanks guys. Crizila, I was wondering if a 32 or 33 Ford rad would be the same. The car has the stock grill and hood. I'll have to get it here and do some measuring.

You cann't go wrong with a Ron Davis radiator.

My 32 Ford rad. Filler neck relocated and corners cut off top tank.

sloppy glass may mean the weatherstrip in the glass channel is wornout---binding on rolling up may mean the window channel needs to be adjusted...dont need new glass unless you break it....