Moparts

pics of my 33

Posted By: 80arrow

pics of my 33 - 07/21/13 09:06 PM

Here's a few pics of my 33 I just got. this is the one that I got the wiring harness for. Its not sitting on flat ground so that's why it looks kinda goofy.

Attached picture 7784687-IMG_0725.JPG
Posted By: 80arrow

Re: pics of my 33 - 07/21/13 09:08 PM

It has a 440, 727, and a 9" rear, nothing fancy but its fun to drive.

Attached picture 7784690-IMG_0726.JPG
Posted By: B1arno

Re: pics of my 33 - 07/21/13 10:46 PM

That's awesome! Pretty much the same look I'm going for. Congrats on the new toy!

Arno
Posted By: blaze

Re: pics of my 33 - 07/22/13 12:09 AM

Great ride. Congratulations. Any future plans?
Posted By: rattler

Re: pics of my 33 - 07/22/13 12:30 AM

Cool! I want to do something old like that.
Posted By: Flipper1938

Re: pics of my 33 - 07/22/13 01:58 AM

I bet that sucker IS fun to drive?
Posted By: moparx

Re: pics of my 33 - 07/22/13 02:00 AM

nice car ! have you considered a plymouth or dodge grill shell in the future instead of the ford shell ?
Posted By: Mopar Ron

Re: pics of my 33 - 07/22/13 05:11 PM

"AWESOME" looking car
that should be a fun ride.
we still have a 33 coupe body too
with hopes to do something like this some day

I like the ply or dodge grill idea also Ron...
Posted By: RUNCHARGER

Re: pics of my 33 - 07/23/13 03:56 AM

That's nice, it's got "the look".

Sheldon
Posted By: 80arrow

Re: pics of my 33 - 07/23/13 02:09 PM

Quote:

nice car ! have you considered a plymouth or dodge grill shell in the future instead of the ford shell ?





I didn't even know it was a Ford grill. I'd be interested in a Dodge or Plymouth shell for sure. Anyone got a pic of either and know where I might be able to pick one up? About the only plan for now is to drive it and this winter switch the rear suspension from leaf springs and ladder bars to coils and ladder bars. Oh and change the rear gears from 4.56 to 3.90 or 4.10 so it gets a little better the 10 mpg
Posted By: dogdays

Re: pics of my 33 - 07/23/13 05:53 PM

The '32 Ford grille is sort of standard equipment on hotrods, but I've never seen one on a Mopar before.

Check out '33 and '34 Dodge and Plymouth fronts, they are even more radical than the '33 and '34 fords.

R.
Posted By: Supercuda

Re: pics of my 33 - 07/23/13 07:05 PM

Quote:

The '32 Ford grille is sort of standard equipment on hotrods, but I've never seen one on a Mopar before.




Ford Grille, Ford front suspension, Ford rear axle, good thing the drive train is Mopar.
Posted By: Mopar Ron

Re: pics of my 33 - 07/23/13 08:06 PM

here is a side by side picture of B1arno's car with the 32 ford grill shell and then with the 34 Ply shell.
I like the mopar shell better(why try to look like a ford when a mopar is better looking in my opinion) Ron...

Attached picture 7787242-Screenshot2013-07-23at12.01.18PM.png
Posted By: Mopar Ron

Re: pics of my 33 - 07/23/13 08:12 PM

here is a picture showing a 33 ply shell and a 34 ply shell with the bottoms trimmed down. on fenderless cars.

Attached picture 7787258-Screenshot2013-07-23at12.10.39PM.png
Posted By: 80arrow

Re: pics of my 33 - 07/26/13 01:10 PM

Thanks for the pics, I really like the 34 shell and grill. Well that will be another project for in the future I guess to get that changed when I find another. I'd imagine that the grill and surround aren't cheap?
Posted By: B1arno

Re: pics of my 33 - 08/01/13 03:08 AM

I bought the grille insert and shell some time ago. The fiberglas shells are on Ebay all the time. I think about $250. The inserts are more pricey. I can't remember off hand where I got it but I can figure it out if you want the info.
Arno
Posted By: 80arrow

Re: pics of my 33 - 08/02/13 03:06 PM

I found a guy who has two 34 shells one from a car one from a truck, are they different? Now I just have to get him to answer his phone so I can go look at them, if I get one then I'll start looking for an insert. Maybe I'll hit you up for that info if its not to hard to find then Arno.
Posted By: dogdays

Re: pics of my 33 - 08/02/13 05:02 PM

Don't know about the differences.

I was looking at the pictures and I think I've seen where guys made their own fins. Repro fins are going to be one-offs (my guess) and will cost about $300. Maybe they could be cut out of stainless plate with a water jet?

On the other hand, that '32 ford grille should be worth quite a bit.
Look up prices for those, they're reproduced all over, but the good ones aren't cheap.

R.
Posted By: Mopar Ron

Re: pics of my 33 - 08/02/13 05:03 PM

Quote:

I found a guy who has two 34 shells one from a car one from a truck, are they different? Now I just have to get him to answer his phone so I can go look at them, if I get one then I'll start looking for an insert. Maybe I'll hit you up for that info if its not to hard to find then Arno.




33 and 34 dodge and Plymouth shells are different looking.
is his 34 a Plymouth or Dodge?

and the small truck shell in 33,34 and 35 are the same as 33
the 33-35 BIG truck grill shells are larger but look the same at the top.
hope that help. Ron...
Posted By: Mopar Ron

Re: pics of my 33 - 08/02/13 05:13 PM

here are some dodge shells to compair
the first one is a 33-35 dodge small truck and 33 dodge car.
the second one is a 34 dodge car.
and the last one is the 33-35 Big Truck style.
Ron....

Attached picture 7799747-Screenshot2013-08-02at9.10.15AM.png
Posted By: B1arno

Re: pics of my 33 - 08/03/13 02:41 AM

Ron,
Your knowledge about these cars and photo library amazes me!
Arno
Posted By: moparx

Re: pics of my 33 - 08/03/13 09:58 AM

Quote:

Ron,
Your knowledge about these cars and photo library amazes me!
Arno



ron, you ever think about writing a book ?
Posted By: 80arrow

Re: pics of my 33 - 08/03/13 04:04 PM

I guess he has dodge shells, I think one pick-up and one truck. Sounds like everything he has is for pick-ups or trucks. I'm trying to figure out when I can go look at his stuff. Thanks a lot for all the info Ron
© 2024 Moparts Forums