1936 Dodge coupe

1936 Dodge coupe - 11/24/08 04:56 AM

Hello everone I just thought I would try to post a pic of my coupe and say hi,I'm new to the site and just posted a question in the resto fourum regarding 440 detailing for my GTX.Then I saw theres a street rod section too.COOL.The car is all steel it has a 440 sixpac with a torqueflight and 3.55 suregrip.The front suspension is from street rod engineering with a chrome tilt idiot coulum.
Joe

Posted By: Mopar Ron

Re: 1936 Dodge coupe - 11/24/08 06:11 AM

Hi Joe and welcome to moparts

looks like you got a pretty nice car there

this place is addicting so be prepared....

Ron....

Posted By: AeroMonte

Re: 1936 Dodge coupe - 11/24/08 12:58 PM

X2. There's no cure for the Moparts addiction

. Welcome to the board

and that is a very fine ride you have there. I had a 35 Plymouth coupe project but now I'm working on aquiring a 36 Dodge pickup

Posted By: RodStRace

Re: 1936 Dodge coupe - 11/24/08 02:37 PM

Welcome! NICE ride, and you even posted pics right away, instead of being coaxed!

Posted By: B1arno

Re: 1936 Dodge coupe - 11/24/08 05:50 PM

Welcome! Very cool ride. Lots of good info and great people on this site.
Arno

Posted By: 36PLYM

Re: 1936 Dodge coupe - 11/24/08 10:06 PM

Nice Dodge, pic of the Plymouth of the same year. 318 with 518/46RH trans, 3.55 open rearend. Ididit column also, original front axle with mono leaf springs and disc brakes.

Attached picture 4836296-Moparts.JPG

Posted By: moparx

Re: 1936 Dodge coupe - 11/25/08 01:38 AM

welcome guys !

neat cars! lots of good topics here, and like ron said, adicting !

Posted By: 33Plymouth

Re: 1936 Dodge coupe - 11/26/08 02:34 AM

Welcome Joe, as all have said this is a very informative site and that is certainly is a nice ride you have!!

Posted By: pushbutton

Re: 1936 Dodge coupe - 11/26/08 01:58 PM

Nice ride! Love to see all MoPar street rods.Nothings worse than seeing one with a small block chevy in it.

Posted By: Flipper1938

Re: 1936 Dodge coupe - 11/26/08 04:08 PM

Quote:

Nice ride! Love to see all MoPar street rods.Nothings worse than seeing one with a small block chevy in it.

Toyota powered might be worse

Posted By: AZ_A12_BEE

Re: 1936 Dodge coupe - 11/26/08 04:38 PM

Does the Dodge/Plymouth cars share the same sheet metal? Does my 37 Plymouth truck share the same front sheet metal as the cars?

Attached picture 4840230-206_0671(Large).JPG

Attached picture 4840230-206_0671(Large).JPG

Posted By: earlymopar

Re: 1936 Dodge coupe - 11/26/08 07:29 PM

The hood and fenders are different although I have heard of guys using the fenders with modifications. 36-37 pickup grill shells sure look like the 36 coupe and sedan but I can't speak for actual fit. I do know that you can't take a car grill shell with the radiator support and interchange it to a pickup as the pickup core support has an offset that is not seen on the sedan or coupe.

- EM

Posted By: Webster

Re: 1936 Dodge coupe - 11/27/08 03:27 AM

Welcome!!!!!!! Nice Hot Rod

I'm just starting mine

Posted By: beesting

Re: 1936 Dodge coupe - 11/27/08 11:55 AM

nice dodge! welcome to board

hoping to get started back on mine soon now that the bee is done (38 dodge)

Attached picture 4841766-Picture014.jpg

Posted By: Firepowerflyer

Re: 1936 Dodge coupe - 11/28/08 04:04 AM

Here's a pic of the engine.I know it's got a Chevy alternator on it,it just worked out that way and I wanted a one wire simple install.

Posted By: Mopar Ron

Re: 1936 Dodge coupe - 11/28/08 06:27 AM

Quote:

Here's a pic of the engine.I know it's got a Chevy alternator on it,it just worked out that way and I wanted a one wire simple install.

you don't have to make excuses for the alt. they work great

the engine is the big thing, mopar in a Mopar

and that is a very nice one

Ron...

Posted By: 241hemi

Re: 1936 Dodge coupe - 11/29/08 04:04 AM

nice ride. this site changed my life. i bought my car here 4 years ago. thanks for keeping her mopar.

Attached picture 4845082-coronet001(Custom).jpg

Posted By: DusterKrazy

Re: 1936 Dodge coupe - 11/30/08 04:24 AM

cool ride

welcome to the addiction!
Here's my '46 dodge in progress. I also have a gm 1 wire alt..

Attached picture 4847106-Picture1568.jpg

Posted By: RUMBLON

Re: 1936 Dodge coupe - 12/04/08 06:52 AM

Nice rid, MORE PICS please. I usually have pics ready but my site went down and I have to rebuild it this weekend.
I have a 38 Plymouth business couple and really want a 5.7 HEMI in it. But I stare at a 600 HP 500 stroker sitting in my shop every day and have a 440-6 in my 70 cuda vert. Its tempting to think of this huge stroker in that 38? More pics.

Dave

Posted By: Firepowerflyer

Re: 1936 Dodge coupe - 12/07/08 04:11 AM

I don't have to many more shots of it,here's a couple on the way to Back to the Fiftes show in the twin cites a few years back.
Joe

Posted By: Anonymous

Re: 1936 Dodge coupe - 06/29/09 07:57 PM

Need interior parts. Window garnish and sheetmetal for the inside top of passenger door. Got any contacts/

Posted By: rabid scott

Re: 1936 Dodge coupe - 06/30/09 05:52 AM

Nice Coupe you got there! Dig those Plymouth dog dishes!

Posted By: 36PLYM

Re: 1936 Dodge coupe - 06/30/09 02:37 PM

Sheet metal parts try The Plymouth Doctor, http://www.plymouthdoctor.com/index.html

Street Rod Parts and Memorabilia
http://www.srpmstreetrods.com/render.cz?method=index