I had my Halibrand wheels milled....

...to work with stock Dodge Dakota wheel studs. (The 41 Dodge is going on a Dakota frame)

When I bought them (used) they came with centers that were 1.5" thick. There were no threads on the wheel stud beyond the hole in the wheel. They were only held on by the threads in the lug nut shank....nothing in the head of the lug nut.

I fixed that. I had pockets milled into the wheels to get full thread engagement. I now have little windows where the lug holes hit the center hole, but that is minor compared to failing lug nuts at highway speeds.

before


after


with nuts

just a thought.... you mite want to consider a way to radius the top & bottom of the "windows" that were created by the pocket milling into the hub center area to prevent stress cracks. not sure that mite happen, but it's possible.

Can I ask where you found the six lug Halibrands?

Ebay ...5 years ago (dang time flies) Shortly after I picked up the 41 Dodge (that I still haven't built)

I think longer studs might have been a solution?

I never could find a long stud that fit the front of a 2001 dakota

Quote:

---

I never could find a long stud that fit the front of a 2001 dakota

---

http://www.summitracing.com/parts/ARP-100-7706/