oil pump cover

Looking to get an oil pump cover with the 2 fittings to make it simple to add a remote filter for my big block high volume pump.......is there any options other than milodon?

Muscle Motors may have something...

M
Anybody use the 440 source pump (melling hv) and cover

I use the fitting in the block along with the fitting in the pump cover. But these are aftermarket blocks, which have the extra fitting.
If you want the two fitting deal you need to look at the milodon pump kits, which have a diff pump body and fitting along with the pump cover fitting.

This cover eliminates the 90 degree bends by having the fittings going straight into the pump.

Andy sure makes some cool parts

The Milodon cover is probably the easiest to find. Indy also makes a two port cover.

I have a picture around here somewhere of an original Jensen cover. It was cast iron with NPT ports for an external filter.

440Source has a two port cover but they don't sell it by itself. Maybe if you call them they'll sell you just the cover.

http://store.440source.com/Billet-Alumin...tinfo/200-1102/

I use the Milodon race pump and the Ecelectic Innovation's cover one of the MOPARTS members had his machinist friend design and make a few years back, nice piece and it works well too! It can be used with a std Melling-type pump or the Milodon race unit. I don't know if he's still making them but the last address for him was (Ted Hauser) Ecelectic Innovation, 4525 E. Industrial 4P, Simi Valley, Calif. 93063

he doesn't make them anymore, and has moved out of state.....

maybe he will make a batch someday,