Posted By: cold85
p5 heads anywhere? - 10/20/11 03:38 PM
used casting new?
p5 heads anywhere?
Posted By: jim sciortino
Re: p5 heads anywhere? - 10/20/11 03:50 PM
Call Rick Waters @RWR.....new casting coming.
Posted By: Plumb Wired
Re: p5 heads anywhere? - 10/20/11 03:52 PM
Most of them probably ended up in Australia for their Pro Stock series which runs small blocks. Might check with Patterson, Eaton or Nickens which were the Mopar factory backed PST teams. Maybe even Kent Ritter. 
Mike Gray
Mike Gray
Posted By: Get-X
Re: p5 heads anywhere? - 10/20/11 03:53 PM
Posted By: cold85
Re: p5 heads anywhere? - 10/20/11 03:56 PM
Quote:
Call Rick Waters @RWR.....new casting coming.
Talked to him I was hoping to pick up a cast set to start the mock up with to see how many things I will have to change from the sbf
Posted By: cold85
Re: p5 heads anywhere? - 10/20/11 03:57 PM
Quote:
http://mbellc.com/index.php/p5-dodge-hemi
same with rick they are waiting on them
Posted By: Plumb Wired
Re: p5 heads anywhere? - 10/20/11 04:01 PM
Posted By: cold85
Re: p5 heads anywhere? - 10/20/11 04:02 PM
Quote:Quote:
http://mbellc.com/index.php/p5-dodge-hemi
Anyone priced these?
I think 10k-13k
Posted By: S/ST 3040
Re: p5 heads anywhere? - 10/20/11 05:21 PM
Posted By: ZIPPY
Re: p5 heads anywhere? - 10/20/11 05:24 PM
Months ago I spoke with the gentleman responsible for the new casting that is supposed to be coming + discussed it with several folks at MP. Long story short, MP can't add them back to the product line at this time, so hopefully the other gentleman does it.
Posted By: Dragula
Re: p5 heads anywhere? - 10/20/11 06:17 PM
Quote:
Months ago I spoke with the gentleman responsible for the new casting that is supposed to be coming + discussed it with several folks at MP. Long story short, MP can't add them back to the product line at this time, so hopefully the other gentleman does it.
Define add them back in? What's to add, on a non- existant product, I just done't see it? Not to really pick on you personally, just frustration with a little too little, too late.
Posted By: LA360
Re: p5 heads anywhere? - 10/20/11 10:15 PM
Posted By: ZIPPY
Re: p5 heads anywhere? - 10/20/11 11:53 PM
On occasion, a discontinued part is sometimes reinstated and made available again. It is very rare (337 big block intake is the only one I have seen) but it does happen. In fact a couple members of moparts.com are partially responsible for the 337 coming back but that's ancient history.
During one particular discussion it was made clear to me that nothing related to P5 heads would be reinstated at any foreseeable time in the future. Just reinforcing the fact the fellow reproducing them is the only game in town at this point, unless used ones would do the job. My source indicated they will be coming from the geographic area that has the highest demand (not the usa).
Posted By: cold85
Re: p5 heads anywhere? - 10/21/11 01:24 PM
Quote:
http://preraceengines.com.au/
You could contact Con and see if he has any.
Does anyone have a email for him would be better so I did not have to call overseas
Posted By: Plumb Wired
Re: p5 heads anywhere? - 10/21/11 02:33 PM
Quote:Quote:
http://preraceengines.com.au/
You could contact Con and see if he has any.
Does anyone have a email for him would be better so I did not have to call overseas
I can't click on any of the tabs on their website, does it work for anyone else? Looks interesting.
Posted By: 52savoy
Re: p5 heads anywhere? - 10/21/11 07:00 PM
I know very little about those heads but I do see them on eBay all the time from NASCAR teams and the going rate seems to be $250(a pair) and up!
Check it out...........
http://motors.shop.ebay.com/i.html?_from...ads&_sacat=
http://www.ebay.com/sch/i.html?_trkparms...86.c0.m14.l1514
I've got a magnesium bellhousing if anyone is looking..
Check it out...........
http://motors.shop.ebay.com/i.html?_from...ads&_sacat=
http://www.ebay.com/sch/i.html?_trkparms...86.c0.m14.l1514
I've got a magnesium bellhousing if anyone is looking..
Posted By: 1967dartgt
Re: p5 heads anywhere? - 10/21/11 07:21 PM
Quote:
I know very little about those heads but I do see them on eBay all the time from NASCAR teams and the going rate seems to be $250(a pair) and up!
Check it out...........
http://motors.shop.ebay.com/i.html?_from...ads&_sacat=
http://www.ebay.com/sch/i.html?_trkparms...86.c0.m14.l1514
I've got a magnesium bellhousing if anyone is looking..
They are p-7 heads which are different.
Posted By: LA360