2 step button on brake pedal

Lets see your 2 step setup on brake pedal please.
Pictures and part numbers if possible.

Thanks
Butch

Before I put in my trans brake I just wired my two step into the stop light switch on the brake pedal.

Great idea, any more?

Used this starter button that you'd normally mount on firewall for valve adjustments.
Hold it when footbraking on the line and when you launch it releases the low side and activates the high rpm side of the 2 step.
Just have to not step on it when braking at the finish line, so place it where you are comfortable with your feet!

Perfect thanks

Butch, I'll suggest an alternative that allows you to keep a cleaner look and not have to worry about stepping on it when you don't want to. Just plumb a tee into your brake line and install a pressure switch. I used a switch from NAPA, though I don't have the part number handy. I plumbed mine into the rear line. Worked great! I have a pic of it somewhere. If I can find it, I'll post.
-Allan

I like that idea even better. I hope you can find the picture.

Thanks
Butch